AD45 Underground Articulated Truck

Continue Browsing

Engine

Engine Model: Cat® C18
Bore: 5.7 in
Stroke: 7.2 in
Displacement: 1104.53 in³
Note (1): Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2): All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3): Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (4): Optional Ventilation Reduction Package available.

Operating Specifications

Nominal Payload Capacity: 99208 lb
Gross Machine Mass: 196765 lb
Body Capacities: 18.0-25.1 m³ (23.5-32.8 yd³)

Transmission

Forward - 1: 4.4 mile/h
Forward - 2: 5.9 mile/h
Forward - 3: 8 mile/h
Forward - 4: 10.8 mile/h
Forward - 5: 14.6 mile/h
Forward - 6: 19.7 mile/h
Forward - 7: 26.4 mile/h
Reverse - 1: 4.2 mile/h
Reverse - 2: 5.6 mile/h
Note: Maximum travel speeds with standard 29.5 × R29 tires.

Final Drives

Differential Ratio: 3.46:1
Final Drive Ratio: 5.65:1
Total Reduction Ratio: 19.55:1

Body Capacities

Dump Body - 1: 23.6 yd³
Dump Body - 2 - Standard: 27.9 yd³
Dump Body - 3: 32.8 yd³
Ejector Body: 29.9 yd³
Note: Heaped SAE 2:1.

Turning Dimensions

Outside Clearance Radius*: 371 in
Inside Clearance Radius*: 209 in
Frame Oscillation: 10°
Articulation Angle: 42.5°
Note: *Clearance dimensions are for reference only.

Service Refill Capacities

Engine Crankcase - With Filter: 16.9 gal (US)
Transmission: 15.9 gal (US)
Hydraulic Tank: 70.3 gal (US)
Cooling System: 22.5 gal (US)
Front Differential and Final Drives: 20.3 gal (US)
Rear Differential and Final Drives: 21.9 gal (US)
Fuel Tank: 201.8 gal (US)

Tires

Tire Size: 29.5 × R29

Standards

Standards: ROPS/FOPS Certified Cab

ELECTRICAL
- 12V power supply in cab
- Alternator, 95-amp
- Auxiliary start receptacle
- Battery disconnect switch, ground level
- Circuit breaker, 80-amp
- Corrosive protection spray
- Diagnostic connector
- Electric starting, 24V
- Engine shutdown switch, ground level
  – Front left hand side
- Lighting
  – Headlights with dimmer switch, LED
  – Brake and tail lights
  – Rear work light (cab mounted), LED
  – Reversing lights, LED
- Low maintenance batteries
- Reversing alarm
- Starting and charging system
OPERATOR ENVIRONMENT
- Cat Electronic Monitoring System (Cat EMS)
- Electric horns
- Gauges
  – Engine coolant temperature
  – Transmission coolant temperature
  – Hydraulic oil temperature
  – Fuel level
  – Speedometer
  – Tachometer
- Indicator lights
  – Alert warning light
  – Body up position warning
  – High beam
  – Residual brake pressure warning
  – Retarder application
  – Turn signal
- Low hydraulic level warning
- Open operator station ROPS/FOPS structure
- Operator presence system (auto park brake)
- Rearview mirrors
- Suspension seat Cat Comfort TLV2 with retractable seat belt
- Trainer/passenger seat and seat belt
- Tilt/telescopic steering wheel
- Turn signal indicators
POWER TRAIN
- Cat C18 ATAAC diesel engine, 6-cylinder
- Automatic brake retarder control
- Auto shift transmission 7 speed forward/2 speed reverse
- Control throttle shifting
- Engine air intake precleaner
- Electric fuel priming pump
- Exhaust, turbo compartment shielding
- Four wheel drive
- Long life coolant
- Programmable ground speed limiting
- Programmable gear block out with tray up
- Radiator, cross flow; Radiator cap manual release
- Secondary steering system
- SAFR^™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
- Torque converter, standard with automatic lockup
OTHER STANDARD EQUIPMENT
- Body, dump, (21.3 m³, 27.9 yd³)
- Catalytic exhaust purifier/muffler group
- Centralized lubrication points
- Decals, international picto graphics
- Dual fuel tanks
- Engine and transmission belly guards
- Fenders, front, rear flaps
- Fire wall
- Fuel system manual shut off tap
- Front axle suspension
- Frame lifting lugs
- Front and rear tow pin
- Front rubber bumpers
- Gauges, brake pressure
- Hand hold (access on/off top deck)
- Hitch, articulated and oscillated
- Operation and Maintenance Manual – English and other applicable local languages to select
- S·O·S port
  – Coolant
  – Engine oil
  – Hydraulic oil
  – Transmission oil
- Swing out radiator grill
- Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

OPTIONAL EQUIPMENT
- Battery shutdown
  – Ground level isolation, in cab isolation switch
  – Ground level isolation, engine shutdown switch
  – Ground level isolation, in cab isolation, engine shutdown switch
- Body dump
  – Body (18.0 m³, 23.5 yd³)
  – Body (25.1 m³, 32.8 yd³)
- Body ejector
  – Ejector (22.9 m³, 30.0 yd³)
- Body liners, impact and/or wear
  – 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
  – 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
  – 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
  – 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)
- Body wear plate, external
  – 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
  – 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
  – 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)
- Camera
  – Color rear facing
  – Color loading
- Cover, anti vandalism for shipping
- Engine options
  – Engine, Stage V
  – Engine, Ventilation Reduction (VR)
  – Equivalent to Tier 3
  – After-treatment options (for use with VR Engine only)
- DPF (Flow Through) Filter
- Fast fill system
  – Coolant
  – Engine oil
  – Fuel (dual tanks)
  – Hydraulic oil
  – Transmission oil
- Fire suppression system
  – Ansul, wet
- Fluids
  – Arctic fuel
  – Arctic coolant
- Handrail Extension
- Lubrication system
  – Automatic, dump or ejector body
  – Centralized, ejector body
- Mine transfer
  – Mine transfer ready front frame (tack welded)
  – Mine transfer ready dump body (tack welded)
  – Mine transfer ready ejector body (tack welded)
- Operators station ROPS/FOPS enclosed
  – Air conditioning
  – Cab pressurizer and filter
  – Dome light
  – Heater
  – Radio ready compartment for radio and speakers
  – Sun visor
  – Window, sliding cab door
- Park brake switch engagement
  – Push to apply
  – Pull to apply
- Payload
  – Truck Payload Measurement System (TPMS)
- Reflective tape
- Rims
  – Rim identification numbering
  – Spare, tubeless
- Seat
  – Suspension seat Cat Comfort TLV2, vinyl
  – Suspension seat tee, mechanical
- Seat cover
  – Tee and Cat Comfort TLV2
  – Seat cover, companion
- Service tools
  – Collet jacking bolts, dump or ejector
  – Diagnostics box
  – Hoist cylinder supports (for body removal)
  – Brake wear gauge
  – Reference parts manual for additional tooling available
- Switches
  – Engine shutdown, fire suppression activation
  – Idle timer
  – Engine shutdown, fire suppression activation/idle timer
- Technology
  – Product Link Elite (PLE) system
- Tire arrangements
  – Tire, 29.5 × R29 VSNT Bridgestone
  – Tire, 29.5 × R29 VSDL Bridgestone
- Torque converter, high altitude, 3000 m (9,842 ft) and up
- NOTE: Not all features are available in all regions. See your Cat dealer for more information.