930M Small Wheel Loader

Engine

Maximum Gross Power

168 hp

Maximum Rated Gross Power: ISO 14396

164 hp

Rated Net Power

157 hp

Maximum Rated Gross Power: ISO 14396 (DIN)

166 hp

Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800 rpm

Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)

164 hp

Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

166 hp

Engine Model

Cat® C7.1 ACERT™

Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

160 hp

Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

163 hp

Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)

168 hp

Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

170 mhp

Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

156 hp

Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)

588 ft·lbf

Displacement (Performance Power Mode: Speed Range 1-4)

427 in³

Note (2)

*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)

601 ft·lbf

Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

158 mhp

Note (1)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)

160 hp

Engine Model

Cat C7.1**

Displacement (Standard Power Mode: Speed Range 1-3*)

427 in³

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)

573 ft·lbf

Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)

166 mhp

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)

586 ft·lbf

Note (3)

**The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.

Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)

162 mhp

Maximum Gross Power

164 hp

Bore

4 in

Stroke

5 in

Displacement

427 in3

Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)

162 hp

Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)

592 lbf-ft

Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)

566 lbf-ft

Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)

572 lbf-ft

Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)

1600 rpm

Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)

160 hp

Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

156 hp

Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

158 hp

Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)

592 lbf-ft

Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)

566 lbf-ft

Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)

572 lbf-ft

Emissions

Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.

Note

* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Note

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note

Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Buckets

Bucket Capacities

2.1-5.0 m3 (2.7-6.5 yd3)

Bucket Capacities

2.1-5.0 m3 (2.7-6.5 yd3)

Bucket Capacities - Light Material

3.1-5.0 m³ (4.0-6.5 yd³)

Bucket Capacities - General Purpose

2.1-2.7 m³ (2.7-3.5 yd³)

Weights

Operating Weight

30879 lb

Operating Weight

31382 lb

Cab

ROPS

ISO 3471: 2008

ROPS

ISO 3471:2008

FOPS

ISO 3449: 2005 LEVEL II

FOPS

ISO 3449:2005 Level II

Note

Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab

Note

* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (3)

*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Steering

Steering Cylinder: Double Acting – Bore Diameter

2.8 in

Steering Cylinder: Double Acting – Rod Diameter

1.6 in

Steering Cylinder: Double Acting – Stroke

17.2 in

Maximum Flow – Steering Pump

34 gal/min

Maximum Working Pressure – Steering Pump

3500 psi

Maximum Steering Torque – 0° (Straight Machine)

37155 lbf-ft

Maximum Steering Torque – 40° (Full Turn)

27747 lbf-ft

Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited

2.8 seconds

Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed

2.4 seconds

Note

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Note

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed

2.4 s

Maximum Steering Torque - 40° (Full Turn)

27747 ft·lbf

Maximum Flow - Steering Pump

34 gal/min

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.5 turns

Maximum Working Pressure - Steering Pump

3500 psi

Maximum Steering Torque - 0° (Straight Machine)

37155 ft·lbf

Steering Articulation Angle - Each Direction

40°

Loader Hydraulic System

Maximum Flow – Implement Pump

50 gal/min

Maximum Flow – Implement Pump: 3rd Function Maximum Flow*

50 gal/min

Maximum Flow – Implement Pump: 4th Function Maximum Flow*

42 gal/min

Maximum Working Pressure – Implement Pump

3626 psi

Relief Pressure – Tilt Cylinder

4061 psi

Relief Pressure – Tilt Cylinder: 3rd and 4th Function Maximum Working Pressure

3626 psi

Relief Pressure – Tilt Cylinder: 3rd and 4th Function Relief Pressure

4061 psi

Lift Cylinder: Double Acting – Bore Diameter

4.7 in

Lift Cylinder: Double Acting – Rod Diameter

2.6 in

Lift Cylinder: Double Acting – Stroke

28.7 in

Tilt Cylinder: Double Acting – Bore Diameter

5.9 in

Tilt Cylinder: Double Acting – Rod Diameter

3.5 in

Tilt Cylinder: Double Acting – Stroke

21.9 in

Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)

5.1/5.7 seconds

Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)

1.5/1.7 seconds

Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)

2.7/2.7 seconds

Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time

9.3/10.1 seconds

Note

* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Note

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Note

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level

2.7 s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift

5.7 s

Note (1)

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

3771 psi

Maximum Working Pressure - Implement Pump

3771 psi

Relief Pressure - Tilt Cylinder

4061 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4061 psi

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42 gal/min

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height

1.5 s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift

5.1 s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level

2.7 s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time

10.1 s

Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height

1.7 s

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time

9.3 s

Maximum Flow - Implement Pump

50 gal/min

Service Refill Capacities

Fuel Tank

51.5 gal

Cooling System

7.9 gal

Engine Crankcase

5.3 gal

Transmission (Gear Box)

2.2 gal

Front Axles

6.9 gal

Rear Axles

6.6 gal

Hydraulic System (Including Tank)

43.6 gal

Hydraulic Tank

23.8 gal

Diesel Exhaust Fluid (DEF) Tank

5.0 gal

Hydraulic System - Including Tank

43.6 gal (US)

Hydraulic Tank

23.8 gal (US)

Rear Axles

6.6 gal (US)

Transmission - Gear Box

2.2 gal (US)

Diesel Exhaust Fluid (DEF) Tank

5 gal (US)

Front Axles

6.9 gal (US)

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Fuel Tank

51.5 gal (US)

Engine Crankcase

5.3 gal (US)

Cooling System

7.9 gal (US)

Transmission

Forward and Reverse: Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse: Range 2

8 mph

Forward and Reverse: Range 3

17 mph

Forward and Reverse: Range 4

25 mph

Note

* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Forward and Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse - Range 4

25 mile/h

Forward and Reverse - Range 3

17 mile/h

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Forward and Reverse - Range 2

8 mile/h

Operating Specifications

Full Turn Tip Load

18670 lb

Power Train

Front Axle

Fixed

Front Axle: Traction Aid (standard)

Locking differential

Rear Axle

Oscillating

Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65

± 10.5 degrees

Rear Axle: Oscillation Angle by Tire Size – Solid Tires, 750/65, 620/65, Skidder

± 7 degrees

Rear Axle: Traction Aid (optional)

Limited slip differential

Brakes: Service

Inboard wet disc

Brakes: Park

Spring applied hydraulically released

Note

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Note

Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Sustainability

Recyclability

94%

Sound

Note (1)

European Union Directive “2000/14/EC”

Axles

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Front

Fixed; Locking differential (standard)

Tires

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Other Choices Include

20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires

Standard Size

20.5 R25, radial (L-3)