930M Ag Handler Small Wheel Loader

Engine

Maximum Gross Power

168 hp

Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)

160 hp

Maximum Gross Power – ISO 14396 (DIN) (Standard Power Mode; Speed Range 1-3*)

162 hp

Rated Net Power at 1,600 rpm – SAE J1349 (Standard Power Mode; Speed Range 1-3*)

154 hp

Rated Net Power at 1,600 rpm – SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)

141 hp

Engine Model

Cat C7.1 ACERT

Rated Net Power at 1,600 rpm – ISO 9249 (DIN) (Standard Power Mode; Speed Range 1-3*)

158 hp

Maximum Rated Gross Power - ISO 14396

168 hp

Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

170 hp

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800 r/min

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)

601 ft·lbf

Stroke - Performance Power Mode: Range 1-4

5.3 in

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)

797 N·m

Displacement (Performance Power Mode: Speed Range 1-4)

428 in³

Emissions

Engine meets U.S. EPA Tier 4 Final emission standards.

Engine Model

Cat® C7.1

Note (4)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note (2)

**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (3)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)

168 hp

Note (1)

*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Bore (Standard Power Mode: Range 1-4)

4.1 in

Maximum Gross Power

164 hp

Maximum Gross Torque – ISO 14396 (Standard Power Mode; Speed Range 1-3*)

592 lbf-ft

Maximum Net Torque – SAE J1349 (Standard Power Mode; Speed Range 1-3*)

566 lbf-ft

Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)

572 lbf-ft

Displacement (Standard Power Mode; Speed Range 1-3*)

427 in3

Maximum Gross Power – ISO 14396 (Performance Power Mode; Speed Range 1-4)

164 hp

Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode; Speed Range 1-4)

166 hp

Rated Net Power at 1,800 rpm – SAE J1349 (Performance Power Mode; Speed Range 1-4)

157 hp

Rated Net Power at 1,800 rpm – SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)

143 hp

Rated Net Power at 1,800 rpm – ISO 9249 (DIN) (Performance Power Mode; Speed Range 1-4)

162 hp

Maximum Gross Torque – ISO 14396 (Performance Power Mode; Speed Range 1-4)

592 lbf-ft

Maximum Net Torque – SAE J1349 (Performance Power Mode; Speed Range 1-4)

566 lbf-ft

Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)

572 lbf-ft

Displacement (Performance Power Mode; Speed Range 1-4)

427 in3

Emissions

Engine meets Tier 4 Final emission standards.

Note

Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.

Note

Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.

Note

*Range 4 power is boosted to be the same as Performance Mode.

Buckets

Bucket Capacities

2.1-5.0 m³ (2.7-6.5 yd³)

Bucket Capacities

3.1-5.0 m3 (4.0-6.5 yd3)

Bucket Capacities – Light Material

3.1-5.0 m3 (4.0-6.5 yd3)

Bucket Capacities - Light Material

3.1-5.0 m³ (4.0-6.5 yd³)

Weights

Operating Weight

31876 lb

Operating Weight

31382 lb

Cab

ROPS

ISO 3471:2008

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

FOPS

ISO 3449:2005 Level II

Note

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)

Note

*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*

101 dB(A)

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*

68 dB(A)

Note (1)

*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab

Steering

Steering Articulation Angle (each direction)

40°

Steering Cycle Times (full left to full right): At 1,800 rpm: 90 rpm steering wheel speed

2.4 seconds

Number of Steering Wheel Turns – full left to full right or full right to full left

3.5 turns

Maximum Flow – Steering Pump

34 gal/min

Maximum Working Pressure – Steering Pump

3500 psi

Maximum Steering Torque: 0 degrees (straight machine)

37155 lbf-ft

Maximum Steering Torque: 40 degrees (full turn)

27747 lbf-ft

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.5 turns

Maximum Flow - Steering Pump

34 gal/min

Steering Cylinder, Double Acting - Bore Diameter

2.8 in

Steering Cylinder, Double Acting - Stroke

17.2 in

Note (1)

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Maximum Working Pressure - Steering Pump

3500 psi

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited

2.8 s

Steering Articulation Angle - Each Direction

40°

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed

2.4 s

Steering Cylinder, Double Acting - Rod Diameter

1.6 in

Loader Hydraulic System

Maximum Flow – Implement Pump

50 gal/min

Maximum Flow – Implement Pump: 3rd Function Maximum Flow*

50 gal/min

Maximum Flow – Implement Pump: 4th Function Maximum Flow*

42 gal/min

Maximum Working Pressure – Implement Pump

4061 psi

Relief Pressure – Tilt Cylinder

4351 psi

Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure

4061 psi

Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure

4061 psi

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Raise (ground level to maximum lift)

4.8 seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Dump (at maximum lift height)

1.6 seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Float Down (maximum lift to ground level)

1.8 seconds

Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Total Cycle Time

8.2 seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Raise (ground level to maximum lift)

4.3 seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Dump (at maximum lift height)

1.4 seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Float Down (maximum lift to ground level)

1.8 seconds

Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Total Cycle Time

7.5 seconds

Note

*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.

Relief Pressure - Tilt Cylinder

4351 psi

Cycle Times - 1,600 rpm - Standard: Total Cycle Time

10.1 s

Maximum Flow - Implement Pump

50 gal/min

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42 gal/min

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)

1.5 s

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time

9.3 s

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)

2.7 s

Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)

5.1 s

Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)

2.7 s

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

4061 psi

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)

1.7 s

Maximum Working Pressure - Implement Pump

4061 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4351 psi

Note (1)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)

5.7 s

Service Refill Capacities

Fuel Tank

51.5 gal

Cooling System

7.9 gal

Engine Crankcase

5.3 gal

Transmission (gearbox)

2.2 gal

Axles: Front

6.9 gal

Axles: Rear

6.6 gal

Hydraulic System (including tank)

43.6 gal

Hydraulic Tank

23.8 gal

Diesel Exhaust Fluid (DEF) Tank

5 gal

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Transmission - Gear Box

2.2 gal (US)

Cooling System

7.9 gal (US)

Diesel Exhaust Fluid (DEF) Tank

5 gal (US)

Fuel Tank

51.5 gal (US)

Axles - Rear

6.6 gal (US)

Hydraulic System - Including Tank

43.6 gal (US)

Engine Crankcase

5.3 gal (US)

Axles - Front

6.9 gal (US)

Hydraulic Tank

23.8 gal (US)

Transmission

Forward and Reverse: Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse: Range 2

8 mph

Forward and Reverse: Range 3

17 mph

Forward and Reverse: Range 4

25 mph

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

Forward - Range 2

8 mile/h

Forward - Range 1*

1-13 km/h (0.6-8 mph)

Reverse - Range 4

25 mile/h

Reverse - Range 2

8 mile/h

Note

Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine

Forward - Range 3

17 mile/h

Forward - Range 4

25 mile/h

Reverse - Range 3

17 mile/h

Reverse - Range 1*

8 mile/h

Tires

Standard Size

20.5 R25, radial (L-3)

Other Choices Include:

20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)

Note

Other tire choices are available. Contact your Cat dealer for details.

Note

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Standard Size

20.5 R25, radial (L-3)

Note (2)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Other Choices Include

20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Axles

Front

Fixed; Locking differential (standard)

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Front

Fixed; Locking differential (standard)

Dimensions and Operating Specifications (Approximate) – 3.1 m³ (4.1 yd³) Bucket

Height: Ground to Cab**

10.92 ft

Height: Ground to Beacon**

12.08 ft

Height: Ground Axle Center**

2.17 ft

Height: Ground Clearance**

1.25 ft

Length: Overall*

27.25 ft

Length: Rear Axle to Bumper

6.50 ft

Length: Hitch to Front Axle

4.92 ft

Length: Wheel Base

9.83 ft

Clearance: Bucket at 45 degrees*

10.42 ft

Clearance: Loadover Height**

11.58 ft

Clearance: Level Bucket**

13.33 ft

Height: Bucket Pin**

14.42 ft

Height: Overall**

18.67 ft

Reach: Bucket at 45 degrees*

4.42 ft

Carry Height: Bucket Pin

2.00 ft

Dig Depth**

5.3 in

Width: Bucket

9.00 ft

Width: Tread Center

6.25 ft

Turning Radius: Over Bucket

20.92 ft

Width: Over Tires

8.33 ft

Turning Radius: Outside of Tires

17.67 ft

Turning Radius: Inside of Tires

9.33 ft

Rack Angle at Full Lift

51 degrees

Dump Angle at Full Lift

44 degrees

Rack Angle at Carry

48 degrees

Departure Angle

33 degrees

Articulation Angle

40 degrees

Tipping Load – Straight (ISO 14397-1)*

16430 lb

Tipping Load – Full Turn (ISO 14397-1)*

13934 lb

Breakout*

18808 lb

Operating Weight*

31876 lb

Note

*Vary with bucket.

Note

**Vary with tire.

Note

Dimensions listed are for a 930M Ag Handler High Lift configured with Fusionâ„¢ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Dimensions and Operating Specifications (Approximate) – 3.5 m³ (4.6 yd³) Bucket

Height: Ground to Cab**

10.92 ft

Height: Ground to Beacon**

12.08 ft

Height: Ground Axle Center**

2.17 ft

Height: Ground Clearance**

1.25 ft

Length: Overall*

27.58 ft

Length: Rear Axle to Bumper

6.50 ft

Length: Hitch to Front Axle

4.92 ft

Length: Wheel Base

9.83 ft

Clearance: Bucket at 45 degrees*

10.17 ft

Clearance: Loadover Height**

11.58 ft

Clearance: Level Bucket**

13.33 ft

Height: Bucket Pin**

14.42 ft

Height: Overall**

19.00 ft

Reach: Bucket at 45 degrees*

4.67 ft

Carry Height: Bucket Pin

2.00 ft

Dig Depth**

5.3 in

Width: Bucket

9.00 ft

Width: Tread Center

6.25 ft

Turning Radius: Over Bucket

21.92 ft

Width: Over Tires

8.33 ft

Turning Radius: Outside of Tires

17.67 ft

Turning Radius: Inside of Tires

9.33 ft

Rack Angle at Full Lift

51 degrees

Dump Angle at Full Lift

44 degrees

Rack Angle at Carry

48 degrees

Departure Angle

33 degrees

Articulation Angle

40 degrees

Tipping Load – Straight (ISO 14397-1)*

16070 lb

Tipping Load – Full Turn (ISO 14397-1)*

13592 lb

Breakout*

17246 lb

Operating Weight*

32136 lb

Note

*Vary with bucket.

Note

**Vary with tire.

Note

Dimensions listed are for a 930M Ag Handler High Lift configured with Fusionâ„¢ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Sustainability

Recyclability

94%

Power Train

Note

*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Rear Axle

Oscillating

Note (2)

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle

Fixed

Front Axle - Traction Aid*

Locking differential standard

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25

± 10.5 degrees

Brakes - Service

Inboard wet disc

Rear Axle - Traction Aid

Limited slip differential optional

Brakes - Parking

Spring applied hydraulically released

Operating Specifications

Full Turn Tip Load

19424 lb

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.