226D Skid Steer Loader
The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
- Technical Specs
- Engine Model
- Cat C2.2 CRDI
- Net Flywheel Power
- 65.8 hp
- Gross Power SAE J1995
- 67.1 hp
- Net Power SAE 1349
- 65.8 hp
- Displacement
- 134.3 in³
- Stroke
- 3.9 in
- Bore
- 3.3 in
- Peak Torque at 1,500 rpm SAE J1995
- 153 lbf-ft
- Net Power ISO 9249
- 66.5 hp
- Operating Weight
- 5705 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual qui
- Rated Operating Capacity
- 1550 lb
- Tipping Load
- 3100 lb
- Breakout Force, Tilt Cylinder
- 3983 lb
- Rated Operating Capacity with Optional Counterweight
- 1650 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual qui
- Wheelbase
- 41.5 in
- Height to Top of Cab
- 79.8 in
- Vehicle Width over Tires
- 58.9 in
- Ground Clearance
- 6.9 in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 46.7°
- Length without Bucket
- 99.4 in
- Length with Bucket on Ground
- 127.3 in
- Maximum Overall Height
- 143.8 in
- Bucket Pin Height at Maximum Lift
- 110.9 in
- Bucket Pin Height at Carry Position
- 8.5 in
- Reach at Maximum Lift and Dump
- 21.0 in
- Clearance at Maximum Lift and Dump
- 81.8 in
- Bumper Overhang behind Rear Axle
- 35.2 in
- Turning Radius from Center – Machine Rear
- 59.6 in
- Turning Radius from Center – Coupler
- 43.5 in
- Turning Radius from Center – Bucket
- 77.8 in
- Maximum Reach with Arms Parallel to Ground
- 50.7 in
- Rack Back Angle at Maximum Height
- 88.9°
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual qui
- Hydraulic Flow – Standard: Loader Hydraulic Pressure
- 3336 psi
- Hydraulic Flow – Standard: Loader Hydraulic Flow
- 18 gal/min
- Hydraulic Flow – Standard: Hydraulic Power (calculated)
- 35.5 hp
- Hydraulic Flow – High Flow: Maximum Loader Hydraulic Pressure
- 3336 psi
- Hydraulic Flow – High Flow: Maximum Loader Hydraulic Flow
- 26 gal/min
- Hydraulic Flow – High Flow: Hydraulic Power (calculated)
- 50.9 hp
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II
- Travel Speed (Forward or Reverse): One Speed
- 7.6 mph
- Travel Speed (Forward or Reverse): Two Speed Option
- 11.1 mph
- Cooling System
- 3.2 gal
- Engine Crankcase
- 2.6 gal
- Fuel Tank
- 15.1 gal
- Hydraulic System
- 11.9 gal
- Hydraulic Tank
- 9.0 gal
- Chain Box, each side
- 1.8 gal
- Inside Cab*
- 83 dB(A)
- Outside Cab**
- 102 dB(A)
- Note
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.