793F Mining Truck - Puckett Rents

Engine Model: Cat C175-16
Gross Power - SAE J1995: 2650 hp
Bore: 6.9 in
Stroke: 8.7 in
Displacement: 5187 in3
Torque Rise: 20%
Note: Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard.
Note: Ratings based on SAE J1995 standard air conditions of 25Â° C (77Â° F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16Â° C (60Â° F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30Â° C (86Â° F).
Note: No engine derating required up to 3200 m (10,500 ft) altitude.
Emissions: Meets Tier 4 Final emission standards.

Chassis Weight: 274587 lb
Body Weight Range: 26 862-47 627 kg (59,220-105,000 lb)
Note: Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires.
Note: Body weight varies depending on how body is equipped.

Nominal Payload Capacity: 250 tons
Steer Angle: 36 Degrees
Top Speed â€“ Loaded: 37.3 mph
Turning Diameter â€“ Front: 93 ft
Turning Circle Clearance Diameter: 107 ft
Gross Machine Operating Weight: 386 007 or 390 089 kg (851,000 or 860,000 lb)
Note: Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.

Pump Flow â€“ High Idle: 224 gal/min
Relief Valve Setting â€“ Raise: 2955 psi
Body Raise Time â€“ High Idle: 19 Seconds
Body Lower Time â€“ Float: 20 Seconds
Body Power Down â€“ High Idle: 17.5 Seconds
Note: Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage.
Note: Power raise in both stages, power down in second stage.
Note: Automatic body lower modulation reduces impact on frame.

ROPS Standards: ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS Standards: FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS for Trainer.

Sound Standards: The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 74 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
Sound Standards: Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.