PMC-V Human Machine Interface for PMC-D Drive Control Systems

Download the Product Brochure Continue Browsing

In face conveyor or plow automation systems the CatÂ® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. WithinÂ a PMC-D system minimum one and typically up to 3 PMC-Vs are inÂ equal operation.

Components

Operating System: ÂµITRON RTOS
Processor: 32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory: 4Mbytes CMOS Static RAM, 4Mbytes Flash

Dimensions (Approximate)

Height: 5.83 in
Length: 13.19 in
Width: 9.49 in

Main Technical Data

Components: 320 Ã— 240 pixel b/w graphics display
Components: IP 68
Components: Optional additional Profibus communication channel for communication with third party computer
Components: 12 SKK24 sockets for power supply, communication, sensors and actuators
Components: Power: 12 W

Global Certifications

Types: Europe: ATEX
Types: U.S.: MSHA
Types: More certifications on demand
Types: Australia: IECEx, ANZEx
Types: China: MA
Types: Russia: GOST

Electrical Data

Supply Current - Maximum Ratings: 1.5 amps
Supply Current - Typical Value: 1.0 amps
Supply Voltage - Maximum Ratings: 9.5 V - 13.2 V
Supply Voltage - Typical Value: 12 V DC

Environmental Data

Temperature - Maximum Ratings: -20Â° C - +40Â° C (-4Â° F - +104Â° F)
Temperature - Symbol: Tamb
Temperature - Typical Value: 68.0 Â° F

Electrical Sockets

Socket 1 - Pin 1: Optocoupler Anode
Socket 1 - Pin 2: Relay Contact NO: a
Socket 1 - Pin 3: Relay Contact NO: b
Socket 1 - Pin 4: Optocoupler Kathode
Socket 10 - Pin 1: +12 V (A)
Socket 10 - Pin 2: Measurement Input 3
Socket 10 - Pin 3: +8.2 V
Socket 10 - Pin 4: GND
Socket 11 - Pin 1: Options
Socket 11 - Pin 2: Options
Socket 11 - Pin 3: Options
Socket 11 - Pin 4: Options
Socket 12 - Pin 2: Profibus: a (internal)
Socket 12 - Pin 3: Profibus: b (internal)
Socket 2 - Pin 1: +12 V (A)
Socket 2 - Pin 2: Serial Interface: RxD
Socket 2 - Pin 3: Serial Interface: TxD
Socket 2 - Pin 4: GND
Socket 3 - Pin 1: +12 V (B)
Socket 3 - Pin 2: Serial Interface: RxD
Socket 3 - Pin 3: Serial Interface: TxD
Socket 3 - Pin 4: GND
Socket 4 - Pin 1: +12 V (C)
Socket 4 - Pin 2: Serial Interface: RxD
Socket 4 - Pin 3: Serial Interface: TxD
Socket 4 - Pin 4: GND
Socket 5 - Pin 1: Options
Socket 5 - Pin 2: Options
Socket 5 - Pin 3: Options
Socket 5 - Pin 4: Options
Socket 6 - Pin 2: Profibus: a (internal)
Socket 6 - Pin 3: Profibus: b (internal)
Socket 7 - Pin 1: +12 V Input
Socket 7 - Pin 2: Serial Interface: TxD
Socket 7 - Pin 3: Serial Interface: RxD
Socket 7 - Pin 4: GND Input
Socket 8 - Pin 1: +12 V (B)
Socket 8 - Pin 2: Measurement Input 1
Socket 8 - Pin 3: +8.2 V
Socket 8 - Pin 4: GND
Socket 9 - Pin 1: +12 V (C)
Socket 9 - Pin 2: Measurement Input 2
Socket 9 - Pin 3: +8.2 V
Socket 9 - Pin 4: GND

Options (Designations of options equal the second and third to last characters of type designation listed on equipment.)

Socket 11 - Pin 1: AB
Socket 11 - Pin 1: **
Socket 11 - Pin 2: AB (Profibus: a [external])
Socket 11 - Pin 2: **
Socket 11 - Pin 3: AB (Profibus: b [external])
Socket 11 - Pin 3: **
Socket 11 - Pin 4: **
Socket 11 - Pin 4: AB
Socket 5 - Pin 1: AB
Socket 5 - Pin 1: **
Socket 5 - Pin 2: AB (Profibus: a [external])
Socket 5 - Pin 2: **
Socket 5 - Pin 3: AB (Profibus: b [external])
Socket 5 - Pin 3: **
Socket 5 - Pin 4: AB
Socket 5 - Pin 4: **