962M Wheel Loader
The new 962M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Aggregate Handler and other optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)
- Technical Specs
- Engine Model
- Cat C7.1 ACERT
- Displacement
- 428 in3
- Net Power – ISO 9249
- 250 hp
- Peak Gross Torque (1,350 rpm) – SAE J1995
- 921 lbf-ft
- Peak Gross Torque (1,350 rpm) – ISO 14396
- 918 lbf-ft
- Max Gross Power @ 2,100 rpm – SAE J1995
- 271 hp
- Max Gross Power @ 2,100 rpm – ISO 14396
- 269 hp
- Max Gross Power @ 2,100 rpm – ISO 14396 (metric)
- 273 hp
- Max Net Power @ 2,100 rpm – SAE J1349
- 250 hp
- Max Net Power @ 2,100 rpm – ISO 9249
- 250 hp
- Max Net Power @ 2,100 rpm – ISO 9249 (metric)
- 253 hp
- Maximum Net Torque (1,350 rpm)
- 865 lbf-ft
- Note
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
- Operating Weight
- 44591 lb
- Note
- Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering,
- Bucket Capacities
- 2.5-9.2 m³ (3.3-12.0 yd³)
- Breakout Force
- 42489 lbf
- Static Tipping Load – Full 40° Turn – with Tire Deflection
- 25814 lb
- Static Tipping Load – Full 40° Turn – No Tire Deflection
- 27494 lb
- Note
- For a machine configuration as defined under “Weight.â€
- Note
- Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Forward 1
- 4.3 mph
- Forward 2
- 7.5 mph
- Forward 3
- 12.0 mph
- Forward 4
- 16.0 mph
- Reverse 1
- 4.3 mph
- Reverse 2
- 7.5 mph
- Reverse 3
- 16.0 mph
- Forward 5
- 24.5 mph
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
- Hydraulic Cycle Time – Total
- 8.9 Seconds
- Implement Pump Type
- Variable Axial Piston
- Implement System: Maximum Pump Output (2,150 rpm)
- 76 gal/min
- Implement System: Maximum Operating Pressure
- 4250 psi
- Cooling System
- 15.6 gal
- Crankcase
- 5.8 gal
- Transmission
- 11.4 gal
- Hydraulic Tank
- 33.0 gal
- Differentials and Final Drives – Front
- 11.4 gal
- Differentials and Final Drives – Rear
- 11.4 gal
- DEF Tank
- 4.2 gal
- Fuel Tank
- 72.6 gal
- With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
- 70 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
- 108 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
- 75 dB(A)*
- Note
- *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
- With Cooling Fan Speed at 70% of Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
- 69 dB(A)
- With Cooling Fan Speed at 70% of Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
- 106 LWA**
- Note
- **European Union Directive “2000/14/EC†as amended by “2005/88/EC.â€
- Bucket Range
- 2.5-9.2 m³ (3.3-12.0 yd³)
- Height to Top of Hood
- 8.83 ft
- Height to Top of Exhaust Pipe
- 11.17 ft
- Height to Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.17 ft
- Center Line of Rear Axle to Edge of Counterweight
- 7.08 ft
- Center Line of Rear Axle to Hitch
- 5.50 ft
- Wheelbase
- 11.00 ft
- Overall Length (without bucket)
- 23.75 ft
- Hinge Pin Height at Carry Height
- 2.17 ft
- Hinge Pin Height at Maximum Lift
- 13.92 ft
- Lift Arm Clearance at Maximum Lift
- 11.33 ft
- Rack Back at Maximum Lift
- 59 degrees
- Rack Back at Carry Height
- 49 degrees
- Rack Back at Ground
- 37 degrees
- Maximum Width over Tires (loaded)
- 9.25 ft
- Tread Width
- 7.00 ft
- Note
- All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
- Height to Top of Hood
- 8.83 ft
- Height to Top of Exhaust Pipe
- 11.17 ft
- Height to Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.17 ft
- Center Line of Rear Axle to Edge of Counterweight
- 7.08 ft
- Center Line of Rear Axle to Hitch
- 5.50 ft
- Wheelbase
- 11.00 ft
- Overall Length (without bucket)
- 23.75 ft
- Hinge Pin Height at Carry Height
- 2.58 ft
- Hinge Pin Height at Maximum Lift
- 14.83 ft
- Lift Arm Clearance at Maximum Lift
- 11.83 ft
- Rack Back at Maximum Lift
- 59 degrees
- Rack Back at Carry Height
- 49 degrees
- Rack Back at Ground
- 37 degrees
- Maximum Width over Tires (loaded)
- 9.25 ft
- Tread Width
- 7.00 ft
- Note
- All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.