160M3 AWD Motor Grader - Puckett Rents

160M3 AWD not only excels at heavier jobs – it also gives you the extra traction you need to work in the toughest ground conditions like mud, gravel or snow. The All Wheel Drive models offer a steering compensation system that gives you a â€œpower turnâ€ for better turning performance in poor underfoot conditions.

Engine

Base Power (1st gear) - Net: 221.0 hp
Engine Model: CatÂ® C9.3 ACERTâ„¢
Bore: 4.5 in
Stroke: 5.9 in
Speed @ Rated Power: 2,000 rpm
AWD Off: Gear - Net Power - Forward - 1st: 231.0 hp
AWD Off: Gear - Net Power - Forward - 2nd: 241.0 hp
AWD Off: Gear - Net Power - Forward - 3rd: 252.0 hp
AWD Off: Gear - Net Power - Forward - 4th: 257.0 hp
AWD Off: Gear - Net Power - Forward - 5th: 262.0 hp
AWD Off: Gear - Net Power - Forward - 6th: 267.0 hp
AWD Off: Gear - Net Power - Forward - 7th: 272.0 hp
AWD Off: Gear - Net Power - Forward - 8th: 272.0 hp
AWD Off: Gear - Net Power - Reverse - 1st: 221.0 hp
AWD Off: Gear - Net Power - Reverse - 2nd: 231.0 hp
AWD Off: Gear - Net Power - Reverse - 3rd-6th: 241.0 hp
AWD On: Gear - Net Power - Forward - 1st: 241.0 hp
AWD On: Gear - Net Power - Forward - 2nd: 262.0 hp
AWD On: Gear - Net Power - Forward - 3rd: 267.0 hp
AWD On: Gear - Net Power - Forward - 4th: 272.0 hp
AWD On: Gear - Net Power - Forward - 5th: 293.0 hp
AWD On: Gear - Net Power - Forward - 6th: 293.0 hp
AWD On: Gear - Net Power - Forward - 7th: 293.0 hp
AWD On: Gear - Net Power - Forward - 8th: 293.0 hp
AWD On: Gear - Net Power - Reverse - 1st: 221.0 hp
AWD On: Gear - Net Power - Reverse - 2nd: 231.0 hp
AWD On: Gear - Net Power - Reverse - 3rd-6th: 241.0 hp
AWD Range - Net: 172-219 kW (231-293 hp)
AWD Range - Net (Metric): 172-219 kW (234-298 hp)
Base Power (1st gear) - Net (Metric): 224.0 hp
Emissions: U.S. EPA Tier 4 Final/EU Stage IV
High Ambient - Fan Speed - Standard: 1,400 rpm
Maximum Torque (AWD on): 1079.0 lb ft
Maximum Torque (VHP Plus): 1000.0 lb ft
Standard Capability: 109.0 Â° F
Torque Rise: 39%
VHP Plus Range - Net: 165-203 kW (221-272 hp)
VHP Plus Range - Net (Metric): 165-203 kW (224-276 hp)
VHP Plus: Gear - Net Power - Forward - 1st: 221.0 hp
VHP Plus: Gear - Net Power - Forward - 2nd: 231.0 hp
VHP Plus: Gear - Net Power - Forward - 3rd: 241.0 hp
VHP Plus: Gear - Net Power - Forward - 4th: 252.0 hp
VHP Plus: Gear - Net Power - Forward - 5th: 257.0 hp
VHP Plus: Gear - Net Power - Forward - 6th: 262.0 hp
VHP Plus: Gear - Net Power - Forward - 7th: 267.0 hp
VHP Plus: Gear - Net Power - Forward - 8th: 272.0 hp
VHP Plus: Gear - Net Power - Reverse - 1st: 221.0 hp
VHP Plus: Gear - Net Power - Reverse - 2nd: 231.0 hp
VHP Plus: Gear - Net Power - Reverse - 3rd-6th: 241.0 hp
Displacement: 567.5 in3
Number of Cylinders: 6
Derating Altitude: 10000.0 ft
High Ambient - Fan Speed - Maximum: 1,550 rpm
High Ambient - Fan Speed - Minimum: 500 rpm
High Ambient Capability: 122.0 Â° F

Power Train

Forward/Reverse Gears: 8 Forward/6 Reverse
Transmission: APECS, Direct Drive, Powershift
Brakes - Service: Multiple Oil Disc
Brakes - Service, Surface Area: 3565.0 in2
Brakes - Parking: Multiple Oil Disc
Brakes - Secondary: Dual Circuit Control

Hydraulic System

Circuit Type: Parallel
Pump Type: Variable Piston
Pump Output: 55.5 gal/min
Maximum System Pressure: 3503.0 psi
Reservoir Tank Capacity: 16.9 gal
Standby Pressure: 885.0 psi

Operating Specifications

Top Speed - Forward: 29.5 mph
Top Speed - Reverse: 23.3 mph
Turning Radius, Outside Front Tires: 25.59 ft
Steering Range - Left/Right: 50Â°
Articulation Angle - Left/Right: 20Â°
Forward - 1st: 2.6 mph
Forward - 2nd: 3.5 mph
Forward - 3rd: 5.1 mph
Forward - 4th: 7.0 mph
Forward - 5th: 10.8 mph
Forward - 6th: 14.7 mph
Forward - 7th: 20.3 mph
Forward - 8th: 29.5 mph
Reverse - 1st: 2.0 mph
Reverse - 2nd: 3.8 mph
Reverse - 3rd: 5.5 mph
Reverse - 4th: 8.5 mph
Reverse - 5th: 16.0 mph
Reverse - 6th: 23.3 mph

Service Refill

Fuel Capacity: 104.0 gal
Cooling System: 15.0 gal
Hydraulic System - Total: 26.4 gal
Hydraulic System - Tank: 16.9 gal
Diesel Exhaust Fluid: 5.8 gal
Trans./Diff./Final Drives: 18.5 gal
Engine Oil: 7.9 gal
Tandem Housing (each): 22.9 gal
Front Wheel Spindle Bearing Housing: 0.13 gal
Circle Drive Housing: 1.8 gal

Frame

Drawbar - Width: 3.0 in
Circle - Diameter: 61.1 in
Circle - Blade Beam Thickness: 1.6 in
Drawbar - Height: 6.0 in
Circle - Height: 6.3 in
Front Frame Structure - Height: 12.6 in
Front Frame Structure - Width: 12.0 in
Drawbar - Thickness: 0.5 in
Front-Top/Bottom Plate - Width: 12.0 in
Front-Top/Bottom Plate - Thickness: 0.87 in
Front Axle - Height to Center: 23.5 in
Front Axle - Wheel Lean, Left/Right: 18Â°
Front Axle - Total Oscillation per Side: 32Â°

Tandems

Height: 22.5 in
Width: 8.0 in
Sidewall Thickness - Inner: 0.69 in
Sidewall Thickness - Outer: 0.71 in
Drive Chain Pitch: 2.0 in
Wheel Axle Spacing: 60.0 in
Tandem Oscillation - Front Up: 15Â°
Tandem Oscillation - Front Down: 25Â°

Moldboard

Blade Width: 14.0 ft
Moldboard - Height: 24.0 in
Moldboard - Thickness: 0.87 in
Arc Radius: 16.3 in
Throat Clearance: 6.5 in
Cutting Edge - Width: 6.0 in
Cutting Edge - Thickness: 0.6 in
End Bit - Width: 6.0 in
End Bit - Thickness: 0.6 in
Blade Pull - Base GVW (AWD): 36817.0 lb
Blade Pull - Maximum GVW (AWD): 49630.0 lb
Blade Down Pressure - Base GVW (AWD): 18935.0 lb
Blade Down Pressure - Maximum GVW (AWD): 29308.0 lb
Moldboard - Blade Width: 14.0 ft

Blade Range

Circle Centershift - Right: 28.7 in
Circle Centershift - Left: 27.4 in
Moldboard Sideshift - Right: 26.0 in
Moldboard Sideshift - Left: 20.1 in
Maximum Blade Position Angle: 90Â°
Blade Tip Range - Forward: 40Â°
Blade Tip Range - Backward: 5Â°
Maximum Lift above Ground: 17.8 in
Maximum Depth of Cut: 29.5 in
Maximum Shoulder Reach Outside of Tires - Right: 89.7 in
Maximum Shoulder Reach Outside of Tires - Left: 82.3 in

Ripper

Ripper Shank Holder Spacing: 21.0 in
Ripping Depth - Maximum: 16.8 in
Ripper Shank Holders: 5
Penetration Force: 20812.0 lb
Pryout Force: 28493.0 lb
Machine Length Increase, Beam Raised: 40.6 in

Scarifier

Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing: 4.6 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders: 5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum: 18.4 in
Front, V-Type, 5 or 11 Tooth - Working Width: 40.6 in
Front, V-Type: Working Width: 47.4 in
Mid, V-Type - Scarifier Shank Holder Spacing: 4.6 in
Mid, V-Type - Scarifier Shank Holders: 11
Mid, V-Type - Scarifying Depth, Maximum: 11.5 in
Mid, V-Type - Working Width: 46.6 in
Rear - Scarifying Depth, Maximum: 16.8 in
Rear - Working Width: 84.0 in
Rear - Scarifier Shank Holders: 9
Rear - Scarifier Shank Holder Spacing: 10.5 in

Weights

Operating Weight - Typically Equipped: 47514.0 lb

Weights - AWD

Gross Vehicle Weight - Base - Front Axle: 11033.0 lb
Gross Vehicle Weight - Base - Rear Axle: 29875.0 lb
Gross Vehicle Weight - Base - Total: 40908.0 lb
Gross Vehicle Weight - Maximum - Front Axle: 17075.0 lb
Gross Vehicle Weight - Maximum - Rear Axle: 38069.0 lb
Gross Vehicle Weight - Maximum - Total: 55144.0 lb
Operating Weight, Typically Equipped - Front Axle: 14289.0 lb
Operating Weight, Typically Equipped - Rear Axle: 33225.0 lb
Operating Weight, Typically Equipped - Total: 47514.0 lb

Dimensions

Height - Top of Cab: 130.0 in
Length - Counterweight to Ripper: 399.0 in
Width - Outside Front Tires: 98.9 in
Length - Front Axle to Mid Tandem: 241.0 in
Length - Front Tire to Rear of Machine: 351.0 in
Length - Front Axle to Moldboard: 100.0 in
Length - Between Tandem Axles: 60.0 in
Width - Outside Rear Tires: 98.9 in
Width - Tire Center Lines: 84.3 in
Height - Front Axle Center: 23.5 in
Height to Exhaust Stack: 128.0 in
Height to Top of Cylinders: 120.0 in
Ground Clearance at Rear Axle: 13.3 in

Standards

Brakes: ISO 3450
ROPS/FOPS: ISO 3471; ISO 3499
Sound: ISO 6394; ISO 6395
Steering: ISO 5010