986H Block Handler Arrangement
Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986H builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
- Technical Specs
- Optional Equipment
- Net Power
- 409.0 hp
- Engine Model
- Cat® C15 ACERT™
- Net Power - ISO 9249
- 409.0 hp
- Bore
- 5.4 in
- Stroke
- 6.75 in
- Displacement
- 927.0 in3
- Torque Rise
- 37.0 %
- EEC 80/1269
- 409.0 hp
- Emissions
- Tier 2
- Gross Power - SAE J1995
- 449.0 hp
- ISO 14396 at Rated Speed
- 441.0 hp
- ISO 9249 at Rated Speed (assumes standard ambient fan)
- 409.0 hp
- Peak Torque @ 1,200 rpm
- 1711.0 lb ft
- Rated Speed
- 1800.0 RPM
- SAE 1349 at Rated Speed (assumes standard ambient fan)
- 409.0 hp
- SAE J1995 at Rated Speed
- 449.0 hp
- Operating Weight
- 106768.0 lb
- Transmission Type
- Cat planetary power shift
- Forward 1
- 5.0 mph
- Forward 2
- 8.0 mph
- Reverse 1
- 5.0 mph
- Reverse 2
- 8.0 mph
- Direct Drive - Forward 2
- 8.0 mph
- Direct Drive - Forward 3
- 14.0 mph
- Direct Drive - Forward 4
- 24.0 mph
- Direct Drive - Reverse 2
- 9.0 mph
- Direct Drive - Reverse 3
- 16.0 mph
- Note
- Travel speeds based on R35/65-33 tires.
- Lift/Tilt System Pumps
- 2 × 110 cc variable displacement
- Maximum Flow at 2,165 rpm
- 123.0 gal/min
- Lift/Tilt System - Circuit
- Load Sense
- Relief Valve Setting - Lift/Tilt
- 4050.0 psi
- Lift Cylinder - Bore
- 7.5 in
- Lift Cylinder - Stroke
- 45.0 in
- Tilt Cylinder - Bore
- 7.5 in
- Tilt Cylinder - Stroke
- 22.4 in
- Rackback
- 4.5 Seconds
- Raise
- 8.5 Seconds
- Dump
- 3.0 Seconds
- Total Hydraulic Cycle Time
- 15.8 Seconds
- Lower
- 4.9 Seconds
- Lower Float Down
- 4.3 Seconds
- Steering System - Circuit
- Load Sense
- Steering System - Pump
- Piston, variable displacement
- Maximum Flow @ 2,284 rpm
- 52.0 gal/min
- Steering Cutoff Pressure
- 4000.0 psi
- Total Steering Angle
- 70.0 Degrees
- Fuel Tank
- 127.0 gal
- Crankcase
- 9.0 gal
- Transmission
- 20.0 gal
- Differentials and Final Drives - Front
- 49.0 gal
- Differentials and Final Drives - Rear
- 45.0 gal
- Hydraulic System (tank only)
- 33.0 gal
- Axle Oil
- 94.0 gal
- Cooling Systems
- 24.0 gal
- Hydraulic System Factory Fill
- 87.0 gal
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±12.5°
- Brakes
- SAE J1473 OCT90, ISO 3450:1992
-
ELECTRICAL
- Batteries - additional
-
OPERATOR ENVIRONMENT
- AM/FM/CD radio
- Rearview camera (WAVS)
- LED strobe warning beacon
- Radio ready