D7E WH Waste Handler
- Technical Specs
- Standard Equipment
- Optional Equipment
- Engine Model
- Cat® C9.3 ACERT™
- Flywheel Power
- 251 hp
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Displacement
- 567 in3
- Global Emissions
- Tier 4 Final/Stage IV/Korea Tier 4
- Engine Power (Maximum) – SAE J1995
- 270 hp
- Engine Power (Maximum) – ISO 14396
- 266 hp
- Engine Power (Maximum) – ISO 14396 (DIN)
- 270 hp
- Net Power (Rated) – ISO 9249/SAE J1349
- 238 hp
- Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
- 241 hp
- Net Power (Maximum) – ISO 9249/SAE J1349
- 251 hp
- Net Power (Maximum) – ISO 9249/SAE J1349 (DIN)
- 254 hp
- Note
- Rated power occurs at 1,700 rpm. Maximum power occurs at 1,600 rpm.
- Cooling System
- 22.5 gal
- Engine Crankcase
- 8 gal
- Final Drives (each)
- 7 gal
- Pivot Shaft Compartment
- 1.8 gal
- Power Train
- 16 gal
- Fuel Tank
- 113.5 gal
- DEF Tank
- 4.75 gal
- Roller Frames (each)
- 11 gal
- Hydraulic Tank
- 20 gal
- Operating Weight
- 71455 lb
- Shipping Weight
- 59456 lb
- Operating Weight – LGP S WHA
- 69478 lb
- Operating Weight – LGP U WHA
- 71455 lb
- Note
- Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.
- Note
- Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, striker box and operator.
- ROPS
- Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
- FOPS
- Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
- Brakes
- Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008
- AC Compressor Maximum Input Current
- 12 Amps
- AC Compressor Nominal Input Voltage
- 320 Volts
- AC Generator and Propulsion Module Voltage
- 480 Volts
- Note
- Nominal current dependent on heat/humidity loading on HVAC unit.
- Type
- Electric Drive
- Track Gauge
- 90 in
- Type
- Heavy Duty Undercarriage
- Configuration
- LGP
- Number of Rollers (each side)
- 8
- Number of Shoes (each side)
- 44
- Pitch
- 8.5 in
- Shoe Width
- 36 in
- Grouser Height (MS)
- 2.75 in
- Length of Track on Ground (Heavy Duty)
- 136 in
- Ground Contact Area (Heavy Duty)
- 9792 in2
- Ground Pressure (Heavy Duty) – ISO 16754
- 6.4 psi
- Ground Clearance
- 18.6 in
- Blade Capacity (SAE J1265)
- 25 yd3
- Width (over end bits)
- 15.1 ft
- Height
- 8 ft
- Digging Depth
- 24.8 in
- Ground Clearance
- 50.9 in
- Maximum Tilt
- 30.9 in
- Weight*
- 8875 lb
- Note
- *Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).
- Blade Capacity (SAE J1265)
- 30 yd3
- Width (over end bits)
- 15.4 ft
- Height
- 8 ft
- Digging Depth
- 27.3 in
- Ground Clearance
- 52.6 in
- Maximum Tilt
- 30.9 in
- Weight*
- 11645 lb
- Note
- *Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).
- Track Gauge
- 90 in
- Width of Tractor over Trunnions
- 135 in
- Width of Tractor without Trunnions (std. shoes)
- 126 in
- Machine Height from Tip of Grouser – Top of Stack
- 132 in
- Machine Height from Tip of Grouser – Top of Standard Cab
- 134 in
- Machine Height from Tip of Grouser – From Ground Face of Shoe
- 131 in
- Length of Track on Ground
- 136 in
- Length of Basic Tractor
- 181 in
- Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip at ground line)
- N/A
- Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip fully raised)
- N/A
- Length of Basic Tractor – With the following attachment add to basic tractor length: Drawbar
- 10.6 in
- Length of Basic Tractor – With the following attachment add to basic tractor length: S Blade
- 53.5 in
- Length of Basic Tractor – With the following attachment add to basic tractor length: U Blade
- 76.6 in
- Height of Grouser
- 2.75 in
- Ground Clearance
- 18.6 in
- Ground Contact Area (std. shoes)
- 9792 in2
- Number of Shoes per Side
- 44
- Standard Shoe Width (Moderate Service)
- 36 in
- Ground Pressure
- 6.4 psi
- Pitch
- 8.5 in
- Track Rollers/Side
- 8
- Number of Carrier Rollers
- 2
- Drawbar Height (grouser tip to center of clevis)
- 28 in
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg of refrigerant which has a CO2 equivalent 1.716 metric tonnes.
-
ELECTRICAL
- Accessory Power Converter (APC)
- Alarm, Backup
- Batteries, Heavy Duty
- Converter, 24V to 12V, 10 Amp
- Heater, Engine Coolant, 120V
- Horn, Forward Warning
- Product Link
-
OPERATOR ENVIRONMENT
- Enhanced Clean Cab
- Air Suspension Seat
- Cab Door Screens
- Armrest, Adjustable
- Bidirectional Shift Switch
- Center Post Cab, ROPS/FOPS
- Continuously Variable Speed Control
- Differential Steering
- Electro-Hydraulic Controls
- Electronic Monitoring System
- Foot Supports, Dash
- Hour Meter, Electronic
- Machine Isolation, Operator Not Present
- Mirror, Rearview
- Modular HVAC, Cab Mounted
- Radio Ready, 12V
- Seat Belt, Retractable 76 mm (3")
- Speed Recall Button
- Throttle Dial, Electronic
- Tilt Cab and Tilt Cab Jack
- Travel Control Pedal
- Wipers, Intermittent
-
POWER TRAIN
- Final Drive Flange Protection Guards
- Final Drive Clamshell Guard
- Engine Thermal Shields
- Heavy Duty Final Drive Flange Guards
- Aftercooler
- Air Cleaner, Precleaner with Strata Tube Dust Ejector
- C9.3 ACERT Engine – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
- Continuously Variable Speed Transmission
- Coolant, Extended Life
- Drains, Ecology, Power Train
- Electronic Air Cleaner Service Indicator
- Fan, Hydraulically Driven Demand
- Final Drives, Double Reduction
- Fuel Priming Pump, Electronic
- Parking Brake, Electronic
- Starting Aid, Ether
- Water Cooled Turbocharger, Wastegated
- Water Separator
- Reversing Fan
-
UNDERCARRIAGE
- Heavy Duty Track (660 mm/26" MS Trap)
- Heavy Duty Track (914 mm/36" MS Trap)
- Guards, End Track Guiding
- Idler Guards
- Master Link
- Idler Seal Guards, Kevlar Design
- Track Roller Frame Debris Guard
- Rollers and Idlers, Lifetime Lubricated
- Sprocket Rim Segments, Replaceable
- Track Adjusters, Gas Spring Recoil
- Grease Track Adjust
- Guard Group, Track Guide
-
OTHER STANDARD EQUIPMENT
- Fenders, Heavy Duty
- Chassis Guarding on Mainframe
- Seal Guard Group
- Crankcase Guard Group
- Fuel Tank Guards
- Dozer Lines Guards
- Black Hood and Dozer Lift Cylinder
- Screen, Grill Door
- CD ROM Parts Book
- Engine Enclosures, Perforated
- Front Tow Hook
- Grade Control Ready
- Guards, Hinged Bottom
- Hood, Perforated
- Hydraulics, Load Sensing, Dozer Lift and Tilt
- Oil Cooler, Hydraulic
- S·O·SSM Sampling Ports
- Radiator Doors, Louvered, Double Hinged
- Vandalism Protection for Fluid Compartments and Battery Box
- Insulated Clean Emissions Module
- AccuGrade Ready Installation
- Arrangement
- Back of Blade, Black
- Cold Weather Attachments
- Engine Coolant Heater, 240V
- Fast Fuel
- Heavy Duty Final Drive Flange Guards
- Rear Screen
- Heated Seat
-
Lights
- Basic (6) Lights
- Premium (10) HID and Halogen Lights
- Power Train Oil Change System
- Rear Vision Camera
- Rear Striker Box or Multi-shank Ripper with Striker Bar and Ripper Hydraulics
- Sound Suppression (Europe)
- Track Guide Guards
-
Landfill Bulldozer Blades – with Trash Racks
- LGP S
- LGP U
- Heavy Duty Track (660 mm/26" ES Trap)
- Heavy Duty Track (914 mm/36" ES Trap)