910M Compact Wheel Loader

Net Power: 97 hp
Maximum Gross Power: Maximum Engine Speed: 2350 RPM
Engine Model: Cat C4.4 ACERTâ„¢
Maximum Gross Power: SAE J1995: 102 hp
Maximum Gross Power: ISO 14396: 100 hp
Maximum Gross Power: ISO 14396 (DIN): 101 hp
Rated Net Power: Rated Engine Speed: 2200 RPM
Rated Net Power: SAE J1349: 96 hp
Maximum Gross Power: 100 hp
Rated Net Power: ISO 9249: 97 hp
Rated Net Power: ISO 9249 (DIN): 98 hp
Maximum Gross Torque: SAE J1995: 336 lbf-ft
Maximum Gross Torque: ISO 14396: 332 lbf-ft
Maximum Net Torque: SAE J1349: 325 lbf-ft
Maximum Net Torque: ISO 9249: 329 lbf-ft
Displacement: 268 in3
Bore: 4.13 in
Stroke: 5.00 in
Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note: Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Cooling System: 5.7 gal
Fuel Tank: 40.7 gal
Hydraulic System (including tank): 25.9 gal
Engine Crankcase: 2.3 gal
Axles: Front Center Differential: 2.0 gal
Axles: Rear Center Differential: 2.0 gal
Hydraulic Tank: 14.5 gal
Diesel Exhaust Fluid (DEF) Tank: 5.0 gal
Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission: 0.9 gal

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level II
Note: Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note: The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note: The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note: *The measurements were conducted with the cab doors and windows closed.

Steering Articulation Angle (each direction): 40 degrees
Maximum Flow â€“ Steering Pump: 17 gal/min
Maximum Working Pressure â€“ Steering Pump: 2683 psi
Steering Cycle Times (full left to full right): At 2,350 RPM: 90 RPM steering wheel speed: 3.2 seconds
Number of Steering Wheel Turns â€“ full left to full right or full right to full left: 3.75 turns

Maximum Flow â€“ Implement Pump: 32 gal/min
Maximum Flow â€“ Implement Pump: 3rd Function, Maximum Flow: 24 gal/min
Maximum Flow â€“ Implement Pump: 4th Function, Maximum Flow: 24 gal/min
Maximum Working Pressure â€“ Implement Pump: 3408 psi
Relief Pressure â€“ Tilt Cylinder: 4931 psi
Relief Pressure â€“ Tilt Cylinder: 3rd Function Maximum Working Pressure: 3046 psi
Relief Pressure â€“ Tilt Cylinder: 4th Function Maximum Working Pressure: 3046 psi
Hydraulic Cycle Times: Raise (ground level to maximum lift): 5.2 seconds
Hydraulic Cycle Times: Dump (at maximum reach): 1.4 seconds
Hydraulic Cycle Times: Rack Back: 2.2 seconds
Hydraulic Cycle Times: Float Down (maximum lift to ground level): 3.7 seconds
Hydraulic Cycle Times: Total Cycle Time: 12.5 seconds

Forward and Reverse: Low Range, Speed Range 1*: 6.3 mph
Forward and Reverse: Low Range, Speed Range 2*: 12.5 mph
Forward and Reverse: High Range: 25 mph
Note: *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Standard Size: 15.5-25 12PR
Other Choices Include:: 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportâ„¢
Note: Other tire choices are available. Contact your Cat dealer for details.
Note: In certain applications, the loaderâ€™s productive capabilities may exceed the tireâ€™s tonnes-km/h (ton-mph) capabilities.
Note: Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.