988 GC Wheel Loader
- Technical Specs
- Optional Equipment
- Engine Model
- Cat® C15
- Rated Speed
- 2000
- Peak Power Speed
- 1600
- Engine Power - ISO 14396
- 449 hp
- Gross Power - SAE J1995:2014
- 456 hp
- Net Power - SAE J1349:2011
- 373 hp
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
- Bore
- 5.4 in
- Stroke
- 6.75 in
- Displacement
- 927 in³
- Peak Torque - 1,200 rpm - SAE J1995
- 1778 ft·lbf
- Torque Rise
- 16%
- Operating Weight
- 116858 lb
- Rated Payload - Quarry Face
- 12.5 ton (US)
- Bucket Capacity Range
- 6.4-7.6 m3 (8.3-10 yd3)
- Cat Truck Match - High Lift
- 772/773/775
- Transmission Type
- Cat planetary power shift
- Forward - 1
- 5 mile/h
- Forward - 2
- 8 mile/h
- Reverse - 1
- 5 mile/h
- Reverse - 2
- 8 mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 8 mile/h
- Direct Drive - Forward 3
- 14 mile/h
- Direct Drive - Forward 4
- 24 mile/h
- Direct Drive - Reverse 2
- 9 mile/h
- Direct Drive - Reverse 3
- 16 mile/h
- Direct Drive - Reverse 4
- 25.4 mile/h
- Direct Drive - Reverse 1
- Lock-up disabled
- Lift/Tilt System - Circuit
- EH - Load Sense
- Lift/Tilt System
- 2X x 145 cc Variable displacement piston
- Maximum Flow at 2,165 rpm
- 159 gal/min
- Relief Valve Setting - Lift/Tilt
- 4598 psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 190 mm x 1216 mm (7.5 in x 48 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 170 mm x 722 mm (6.7 in x 28.4 in)
- Pilot System
- Variable displacement piston
- Tilt Cylinder - Stroke
- 27 in
- Rack Back
- 3.8 s
- Raise
- 7.5 s
- Dump
- 3 s
- Lower Float Down
- 4.6 s
- Total Hydraulic Cycle Time - Empty Bucket
- 18.9 s
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Maximum Flow
- 52 gal (US)
- Relief Valve Setting - Steering
- 4000 psi
- Total Steering Angle
- 70°
- Steering Cycle Times - High Idle
- 3 s
- Steering Cycle Times - Low Idle
- 5.2 s
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- +/-12.5°
- Brakes
- ISO 3450:2011
- ROPS/FOPS
- ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
- Fuel Tank
- 141 gal (US)
- Cooling System
- 27 gal (US)
- Engine Crankcase
- 9 gal (US)
- Diesel Exhaust Fluid Tank
- 5.5 gal (US)
- Transmission
- 20 gal (US)
- Differential - Final Drives - Front
- 49 gal (US)
- Differential - Final Drives - Rear
- 45 gal (US)
- Note
- Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
- Ground to Top of ROPS
- 13.5 ft
- Ground to Top of Exhaust Stacks
- 13.3 ft
- Ground to Top of Hood
- 10.7 ft
- Rear Axle - Centerline to Bumper
- 10.3 ft
- Front Axle Centerline to Bucket Tip
- 15.7 ft
- Wheel Base
- 12.5 ft
- Maximum Overall Length
- 39.5 ft
- Ground to Lower Hitch Clearance
- 1.5 ft
- Clearance at Maximum Lift
- 12 ft
- B-Pin Height - Maximum Lift
- 18.7 ft
- Maximum Overall Height - Bucket Raised
- 25 ft
- Reach - Maximum Lift
- 7.7 ft
- Note
- Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
- Bucket Capacities
- 6.4-7.6 m3 (8.3-10 yd3)
- Recyclability
- 96%
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- High ambient cooling – software
- Optional Cat Production Measurement
- Optional Engine brake
- Crankcase guard
-
OPERATOR ENVIRONMENT
- Cab precleaner
- Cat Detect, object detection system
- AM/FM radio
-
ADDITIONAL EQUIPMENT
- Front and rear roading fenders
- Cold Weather Starting
- Autolube