980M Wheel Loader
The new 980M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.
- Technical Specs
- Net Power - ISO 9249
- 386 hp
- Engine Model
- Cat C13 ACERT
- Maximum Power @ 1,700 rpm – SAE J1995
- 425 hp
- Maximum Power @ 1,700 rpm – SAE J1995 (metric)
- 431 hp
- Displacement
- 763 in3
- Maximum Power @ 1,700 rpm – ISO 14396
- 420 hp
- Maximum Power @ 1,700 rpm – ISO 14396 (metric)
- 426 hp
- Maximum Net Power @ 1,700 rpm – SAE J1349
- 386 hp
- Maximum Net Power @ 1,700 rpm – SAE J1349 (metric)
- 392 hp
- Maximum Net Power @ 1,700 rpm – ISO 9249
- 386 hp
- Maximum Net Power @ 1,700 rpm – ISO 9249 (metric)
- 392 hp
- Peak Gross Torque (1,200 rpm) – SAE J1995
- 1627 lbf-ft
- Peak Gross Torque (1,200 rpm) – ISO 14396
- 1609 lbf-ft
- Maximum Net Torque (1,100 rpm)
- 1515 lbf-ft
- Note
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
- Cooling System
- 14 gal
- Crankcase
- 9.8 gal
- Transmission
- 20.3 gal
- Hydraulic Tank
- 40 gal
- Differentials and Final Drives – Front
- 22 gal
- Differentials and Final Drives – Rear
- 22 gal
- Fuel Tank
- 112.5 gal
- DEF Tank
- 5.5 gal
- Note
- *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
- With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
- 72 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
- 112 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
- 78 dB(A)*
- With Cooling Fan Speed at 70% of Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)**
- 72 dB(A)
- With Cooling Fan Speed at 70% of Maximum Value: Exterior Sound Power Level (ISO 6395:2008)**
- 109 LWA***
- Note
- **For machines in European Union countries and in countries that adopt the “EU Directives.â€
- Note
- ***European Union Directive “2000/14/EC†as amended by “2005/88/EC.â€
- Operating Weight
- 66337 lb
- Note
- Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Linkâ„¢, open differential axles, secondary steering, sound suppression, and a 5.4 m3
- Bucket Capacities
- 4.2-12.2 m³ (5.25-16.0 yd³)
- Forward 1
- 4.3 mph
- Forward 2
- 8.3 mph
- Forward 3
- 14.6 mph
- Forward 4
- 24.5 mph
- Reverse 1
- 4.8 mph
- Reverse 2
- 9.4 mph
- Reverse 3
- 16.7 mph
- Reverse 4
- 24.5 mph
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.
- Breakout Force
- 50357 lbf
- Static Tipping Load – Full 40° Turn – with Tire Deflection
- 43133 lb
- Static Tipping Load – Full 40° Turn – No Tire Deflection
- 45847 lb
- Note
- For a machine configuration as defined under “Weight.â€
- Note
- Full compliance to ISO 143971:2007 Sections 1 thru 6.
- Implement System: Maximum Pump Output (2,250 rpm)
- 119 gal/min
- Implement System: Maximum Operating Pressure
- 4975 psi
- Hydraulic Cycle Time – Total
- 10.1 Seconds
- Bucket Range
- 4.2-12.2 m³ (5.25-16.0 yd³)
- Height to Top of Hood
- 10.25 ft
- Height to Top of Exhaust Pipe
- 12.33 ft
- Height to Top of ROPS
- 12.58 ft
- Ground Clearance
- 1.42 ft
- Center Line of Rear Axle to Edge of Counterweight
- 8.17 ft
- Center Line of Rear Axle to Hitch
- 6.25 ft
- Wheelbase
- 12.50 ft
- Overall Length (without bucket)
- 26.17 ft
- Hinge-Pin Height at Maximum Lift
- 14.83 ft
- Hinge-Pin Height at Carry
- 2.08 ft
- Lift Arm Clearance at Maximum Lift
- 12.42 ft
- Rack Back at Maximum Lift
- 61 degrees
- Rack Back at Carry Height
- 48 degrees
- Rack Back at Ground
- 40 degrees
- Maximum Width over Tires
- 10.83 ft
- Tread Width
- 8.00 ft
- Note
- All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
- Height to Top of Hood
- 10.25 ft
- Height to Top of Exhaust Pipe
- 12.33 ft
- Height to Top of ROPS
- 12.58 ft
- Ground Clearance
- 1.42 ft
- Center Line of Rear Axle to Edge of Counterweight
- 8.17 ft
- Center Line of Rear Axle to Hitch
- 6.25 ft
- Wheelbase
- 12.50 ft
- Overall Length (without bucket)
- 26.83 ft
- Hinge-Pin Height at Maximum Lift
- 15.58 ft
- Hinge-Pin Height at Carry
- 2.25 ft
- Lift Arm Clearance at Maximum Lift
- 13.08 ft
- Rack Back at Maximum Lift
- 61 degrees
- Rack Back at Carry Height
- 48 degrees
- Rack Back at Ground
- 39 degrees
- Maximum Width over Tires
- 10.83 ft
- Tread Width
- 8.00 ft
- Note
- All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.