972M Wheel Loader
The new 972M Wheel Loader has a Tier 3/Stage IIIA equivalent or Tier 4 Final/Stage IV engine equipped with a combination of proven electronic, fuel, air and aftertreatment components, if required. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity and fuel efficiency. Deep system integration results in improved performance, improved fuel economy, and reduced emissions without interrupting machine performance making it seamless to operators. The reliability, durability, and versatility of the 972M result in a machine that is better built to meet your needs.
- Technical Specs
- Engine Model
- Cat® C9.3 ACERT™
- Net Power – ISO 9249
- 299 hp
- U.S. EPA Tier 4 Final/EU Stage IV: Maximum Gross Power – SAE J1995
- 337 hp
- U.S. EPA Tier 3/EU Stage IIIA equivalent: Maximum Gross Power – SAE J1995
- 330 hp
- Operating Weight
- 54871 lb
- Note
- For 4.8 m3 (6.28 yd3) general purpose buckets with BOCE.
- Note
- Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering,
- Bucket Capacities
- 2.9-9.9 m³ (3.75-13.0 yd³)
- Breakout Force
- 44075 lbf
- Static Tipping Load – Full 37° Turn: No Tire Deflection
- 38396 lb
- Static Tipping Load – Full 37° Turn: With Tire Deflection
- 35626 lb
- Note
- For a machine configuration as defined under “Weight.â€
- Note
- Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Forward 1
- 4.2 mph
- Forward 2
- 8.1 mph
- Forward 3
- 14.4 mph
- Forward 4
- 24.5 mph
- Reverse 1
- 4.7 mph
- Reverse 2
- 9.3 mph
- Reverse 3
- 16.5 mph
- Reverse 4
- 24.5 mph
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
- Hydraulic Cycle Time with Rated Payload – Dump, at Maximum Raise
- 1.5 Seconds
- Hydraulic Cycle Time with Rated Payload – Lower, Empty, Float Down
- 3.1 Seconds
- Hydraulic Cycle Time with Rated Payload – Raise from Carry Position
- 6.1 Seconds
- Hydraulic Cycle Time with Rated Payload – Total
- 10.7 Seconds
- Implement Pump Type
- Variable Displacement Piston
- Implement System: Maximum Operating Pressure
- 4496 psi
- Implement System: Maximum Pump Output (2,200 rpm)
- 95 gal/min
- Implement System: Optional 3rd/4th Function Maximum Flow
- 63 gal/min
- Implement System: Optional 3rd/4th Function Maximum Pressure
- 3159 psi
- Brakes
- Brakes meet ISO 3450 standards
- Front
- Fixed
- Rear
- Oscillating ±13 degrees
- Maximum Single-Wheel Rise and Fall
- 19.5 in
- ROPS/FOPS
- ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
- Cooling System
- 18.9 gal
- Crankcase
- 6.5 gal
- Transmission
- 15.5 gal
- Hydraulic Tank
- 33 gal
- Differentials and Final Drives – Front
- 15.1 gal
- Differentials and Final Drives – Rear
- 15.1 gal
- DEF Tank*
- 4.4 gal
- Fuel Tank
- 82.7 gal
- Note
- *Must meet the requirements outlined in ISO 22241-1 for Tier 4 Final/Stage IV models.
- With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
- 109 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
- 76 dB(A)*
- Note
- The sound values indicated below are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not
- Note
- *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
- With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
- 70 dB(A)
- Engine Model
- Cat C9.3 ACERT
- Maximum Gross Power (1,800 rpm) – SAE J1995
- 330 hp
- Maximum Net Power (1,700 rpm) – SAE J1349
- 298 hp
- Peak Gross Torque (1,200 rpm) – SAE J1995
- 1275 lbf-ft
- Maximum Net Torque (1,000 rpm) – SAE J1349
- 1204 lbf-ft
- Bore
- 4.53 in
- Stroke
- 5.87 in
- Displacement
- 568 in3
- Emissions
- Cat engine with ACERT Technology – meets Tier 3/Stage IIIA equivalent emission standards.
- Engine Model
- Cat C9.3 ACERT
- Maximum Gross Power (1,800 rpm) – SAE J1995
- 337 hp
- Maximum Net Power (1,700 rpm) – SAE J1349
- 299 hp
- Peak Gross Torque (1,200 rpm) – SAE J1995
- 1275 lbf-ft
- Maximum Net Torque (1,100 rpm) – SAE J1349
- 1220 lbf-ft
- Bore
- 4.53 in
- Stroke
- 5.87 in
- Displacement
- 568 in3
- Emissions
- Cat engine with ACERT Technology meets Tier 4 Final/Stage IV emission standards.
- Note
- The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
- Note
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
- Note
- The gross power advertised is with the fan at maximum speed.