Cat® 950M Wheel Loader
The new 950M Wheel Loader has an ACERT™ engine equipped with a combination of proven electronic, fuel, and air components. Applying proven technologies systematically and strategically lets us meet our customers’ high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)
- Technical Specs
- Engine Model
- Cat C7.1 ACERT
- Displacement
- 428 in3
- Net Power – ISO 9249
- 248 hp
- Max Gross Power @ 2,000 rpm – SAE J1995
- 263 hp
- Max Gross Power @ 2,000 rpm – ISO 14396
- 261 hp
- Max Gross Power @ 2,000 rpm – ISO 14396 (metric)
- 265 hp
- Max Net Power @ 2,000 rpm – SAE J1349
- 248 hp
- Max Net Power @ 2,000 rpm – ISO 9249
- 248 hp
- Max Net Power @ 2,000 rpm – ISO 9249 (metric)
- 252 hp
- Peak Gross Torque (1,400 rpm) – SAE J1995
- 777 lbf-ft
- Peak Gross Torque (1,400 rpm) – ISO 14396
- 774 lbf-ft
- Maximum Net Torque (1,400 rpm)
- 726 lbf-ft
- Operating Weight
- 42360 lb
- Note
- Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering,
- Bucket Capacities
- 2.5-9.2 m³ (3.3-12.0 yd³)
- Breakout Force
- 40690 lbf
- Static Tipping Load – Full 40° Turn – No Tire Deflection
- 25926 lb
- Static Tipping Load – Full 40° Turn – with Tire Deflection
- 24262 lb
- Note
- For a machine configuration as defined under “Weight.â€
- Note
- Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Forward 1
- 4.3 mph
- Forward 2
- 7.5 mph
- Forward 3
- 12.0 mph
- Forward 4
- 16.0 mph
- Reverse 1
- 4.3 mph
- Reverse 2
- 7.5 mph
- Reverse 3
- 16.0 mph
- Forward 5
- 24.5 mph
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
- Hydraulic Cycle Time – Total
- 9.1 Seconds
- Implement Pump Type
- Variable Axial Piston
- Implement System: Maximum Pump Output (2,150 rpm)
- 76 gal/min
- Implement System: Maximum Operating Pressure
- 4250 psi
- Cooling System
- 15.6 gal
- Crankcase
- 5.8 gal
- Transmission
- 11.4 gal
- Hydraulic Tank
- 33.0 gal
- Differentials and Final Drives – Front
- 11.4 gal
- Differentials and Final Drives – Rear
- 11.4 gal
- Fuel Tank
- 72.6 gal
- With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
- 70 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
- 107 dB(A)
- With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
- 75 dB(A)*
- Note
- *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
- With Cooling Fan Speed at 70% of Maximum Value:** Operator Sound Pressure Level (ISO 6396:2008)
- 69 dB(A)
- With Cooling Fan Speed at 70% of Maximum Value:** Exterior Sound Power Level (ISO 6395:2008)
- 104 LWA***
- Note
- **For machines in countries that adopt the “EU Directives.â€
- Note
- ***European Union Directive “2000/14/EC†as amended by “2005/88/EC.â€
- Bucket Range
- 2.5-9.2 m³ (3.3-12.0 yd³)
- Height to Top of Hood
- 8.83 ft
- Height to Top of Exhaust Pipe
- 11.17 ft
- Height to Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.17 ft
- Center Line of Rear Axle to Edge of Counterweight
- 6.33 ft
- Center Line of Rear Axle to Hitch
- 5.50 ft
- Wheelbase
- 11.00 ft
- Overall Length (without bucket)
- 22.67 ft
- Hinge Pin Height at Carry Height
- 2.08 ft
- Hinge Pin Height at Maximum Lift
- 13.25 ft
- Lift Arm Clearance at Maximum Lift
- 10.75 ft
- Rack Back at Maximum Lift
- 59 degrees
- Rack Back at Carry Height
- 46 degrees
- Rack Back at Ground
- 38 degrees
- Maximum Width over Tires (loaded)
- 9.33 ft
- Tread Width
- 7.00 ft
- Note
- All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
- Height to Top of Hood
- 8.83 ft
- Height to Top of Exhaust Pipe
- 11.17 ft
- Height to Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.17 ft
- Center Line of Rear Axle to Edge of Counterweight
- 6.83 ft
- Center Line of Rear Axle to Hitch
- 5.50 ft
- Wheelbase
- 11.00 ft
- Overall Length (without bucket)
- 24.58 ft
- Hinge Pin Height at Carry Height
- 2.58 ft
- Hinge Pin Height at Maximum Lift
- 14.83 ft
- Lift Arm Clearance at Maximum Lift
- 11.92 ft
- Rack Back at Maximum Lift
- 56 degrees
- Rack Back at Carry Height
- 49 degrees
- Rack Back at Ground
- 42 degrees
- Maximum Width over Tires (loaded)
- 9.33 ft
- Tread Width
- 7.00 ft
- Note
- All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.