272D2 Skid Steer Loader
The Cat® 272D2 Skid Steer Loader, with its long wheel base and vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
- Technical Specs
- Engine Model
- Cat C3.8 DIT (turbo)
- Net Flywheel Power
- 95 hp
- Gross Power SAE J1995
- 98 hp
- Net Power SAE 1349
- 95 hp
- Displacement
- 232 in³
- Stroke
- 4.7 in
- Bore
- 3.9 in
- Net Power ISO 9249
- 96 hp
- Peak Torque at 1,500 rpm SAE J1995
- 246 lbf-ft
- Operating Weight
- 8768 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA batt
- Rated Operating Capacity
- 3400 lb
- Tipping Load
- 6800 lb
- Breakout Force, Tilt Cylinder
- 7443 lb
- Breakout Force, Lift Cylinder
- 6074 lb
- Rated Operating Capacity with Optional Counterweight
- 3650 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA batt
- Wheelbase
- 54.6 in
- Height to Top of Cab
- 82.4 in
- Vehicle Width over Tires
- 72.0 in
- Ground Clearance
- 8.9 in
- Departure Angle
- 27°
- Maximum Dump Angle
- 51°
- Length without Bucket
- 127.6 in
- Length with Bucket on Ground
- 155.7 in
- Maximum Overall Height
- 160.1 in
- Bucket Pin Height at Maximum Lift
- 127.1 in
- Bucket Pin Height at Carry Position
- 7.8 in
- Reach at Maximum Lift and Dump
- 30.3 in
- Clearance at Maximum Lift and Dump
- 96.0 in
- Bumper Overhang behind Rear Axle
- 46.2 in
- Turning Radius from Center – Machine Rear
- 74.7 in
- Turning Radius from Center – Coupler
- 58.3 in
- Turning Radius from Center – Bucket (racked)
- 89.8 in
- Maximum Reach with Arms Parallel to Ground
- 50.5 in
- Rack Back Angle at Maximum Height
- 84°
- Bucket Pin Reach at Maximum Lift
- 14.7 in
- Roll Back Angle
- 28°
- Hydraulic Flow – Standard: Loader Hydraulic Pressure
- 3335 psi
- Hydraulic Flow – Standard: Loader Hydraulic Flow
- 23 gal/min
- Hydraulic Flow – Standard: Hydraulic Power (calculated)
- 44 hp
- Hydraulic Flow – High Flow XPS: Maximum Loader Hydraulic Pressure
- 4061 psi
- Hydraulic Flow – High Flow XPS: Maximum Loader Hydraulic Flow
- 32 gal/min
- Hydraulic Flow – High Flow XPS: Hydraulic Power (calculated)
- 76 hp
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- FOPS Level II
- ISO 3449:2005 Level II
- Travel Speed (Forward or Reverse): One Speed
- 6.6 mph
- Travel Speed (Forward or Reverse): Two Speed Option
- 9.4 mph
- Cooling System
- 4.1 gal
- Engine Crankcase
- 3.5 gal
- Fuel Tank
- 32.2 gal
- Hydraulic System
- 14.5 gal
- Hydraulic Tank
- 10.3 gal
- Chain Box, each side
- 2.7 gal
- Diesel Exhaust Fluid (DEF) Tank
- 5 gal
- Inside Cab*
- 83 dB(A)
- Outside Cab**
- 102 dB(A)
- Note
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Note
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.