Cat® D6N WH Waste Handler
From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
- Technical Specs
- Engine Model
- Cat C7.1 ACERTâ„¢
- Flywheel Power
- 182 hp
- Bore
- 4.1 in
- Stroke
- 5.3 in
- Displacement
- 433 in3
- Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
- 168 hp
- Net Power (Maximum – 2,200 rpm): SAE J1995
- 182 hp
- Net Power (Maximum – 2,200 rpm): ISO 14396
- 178 hp
- Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349
- 166 hp
- Emissions
- Tier 4 Final/Stage IV/Korea Tier 4 Final
- Note
- All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are a
- Note
- Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
- Net Power (Maximum – 2,200 rpm): ISO 14396 (DIN)
- 180 hp
- Note
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
- Operating Weight
- 40818 lb
- Operating Weight – XL Waste Handler
- 40818 lb
- Operating Weight – LGP Waste Handler
- 44749 lb
- Shipping Weight – XL Waste Handler
- 40029 lb
- Shipping Weight – LGP Waste Handler
- 43642 lb
- Track Gauge
- 74.4 in
- Width of Tractor (without trunnions)
- 98.4 in
- Machine Height from Tip of Grouser to Exhaust Stack
- 122.4 in
- Length of Track on Ground
- 101.6 in
- Length of Basic Tractor (with drawbar)*
- 157.3 in
- Height of Grouser
- 2.6 in
- Ground Clearance
- 14.3 in
- Ground Pressure
- 6.7 psi
- Note
- *Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
- Track Gauge
- 85.0 in
- Width of Tractor (without trunnions)
- 118.0 in
- Machine Height from Tip of Grouser to Exhaust Stack
- 126.9 in
- Length of Track on Ground
- 122.7 in
- Length of Basic Tractor (with drawbar)*
- 166.2 in
- Height of Grouser
- 2.2 in
- Ground Clearance
- 18.8 in
- Ground Pressure
- 4.5 psi
- Note
- *Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
- XL VPAT Landfill*
- 8.29 yd3
- XL VPAT
- 4.3 yd3
- XL SU
- 5.6 yd3
- LGP VPAT Landfill*
- 7.39 yd3
- LGP VPAT
- 5.1 yd3
- Note
- *Blade capacity with trash rack.
- 0.5 Forward
- 1.6 mph
- 0.7 Forward
- 1.7 mph
- 1.5 Forward
- 2.7 mph
- 1.7 Forward
- 3.0 mph
- 2.5 Forward
- 4.7 mph
- 2.7 Forward
- 5.2 mph
- 0.5 Reverse
- 1.9 mph
- 0.7 Reverse
- 2.1 mph
- 1.5 Reverse
- 3.4 mph
- 1.7 Reverse
- 3.7 mph
- 2.5 Reverse
- 5.9 mph
- 2.7 Reverse
- 6.5 mph
- 1.0 Forward
- 2.1 mph
- 2.0 Forward
- 3.6 mph
- 3.0 Forward
- 6.1 mph
- 1.0 Reverse
- 2.5 mph
- 2.0 Reverse
- 4.4 mph
- 3.0 Reverse
- 7.6 mph
- XL VPAT Landfill*
- 10.23 ft
- XL VPAT
- 10.75 ft
- XL SU
- 10.33 ft
- LGP VPAT Landfill*
- 12.89 ft
- LGP VPAT
- 13.38 ft
- Note
- *Blade capacity with trash rack.