986H Wheel Loader
Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The new 986H builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
- Technical Specs
- Net Power
- 409.0 hp
- Engine Model
- Cat® C15 ACERT™
- Net Power – ISO 9249
- 409.0 hp
- Bore
- 5.4 in
- Stroke
- 6.75 in
- Displacement
- 927 in3
- Emissions
- Tier 2, Tier 3 equivalent
- Torque Rise
- 37 %
- Rated Speed
- 1,800 rpm
- ISO 14396 at Rated Speed
- 441.0 hp
- SAE 1349 at Rated Speed (assumes standard ambient fan)
- 409.0 hp
- SAE J1995 at Rated Speed
- 449.0 hp
- Gross Power – ISO 14396
- 441 hp
- Gross Power – SAE J1995
- 449 hp
- Net Power – SAE J1349
- 409 hp
- Peak Torque @ 1,200 rpm
- 1711 lb ft
- Operating Weight
- 96379 lb
- Bucket Capacity Range
- 5-10.3 m3 (6.5-13.5 yd3)
- Operating Weight – High Lift
- 94677.0 lb
- Operating Weight – Standard
- 93090.0 lb
- Rated Payload – High Lift (Quarry Face)
- 10.5 tons
- Cat Truck Match – Standard
- 770
- Cat Truck Match – High Lift
- 772
- Rated Payload – Loose Material (High Lift)
- 12.1 tons
- Rated Payload – Loose Material (Standard)
- 14 tons
- Rated Payload – Quarry Face
- 11 tons
- Transmission Type
- Cat planetary power shift
- Forward 1
- 5.0 mph
- Forward 2
- 8.0 mph
- Reverse 1
- 5.0 mph
- Reverse 2
- 8.0 mph
- Direct Drive – Forward 2
- 8.0 mph
- Direct Drive – Forward 3
- 14.0 mph
- Direct Drive – Forward 4
- 24.0 mph
- Direct Drive – Reverse 2
- 9.0 mph
- Direct Drive – Reverse 3
- 16.0 mph
- Maximum Flow at 2,165 rpm
- 123.0 gal/min
- Lift/Tilt System – Circuit
- Load Sense
- Lift/Tilt System Pumps
- 2 × 110 cc variable displacement
- Relief Valve Setting – Lift/Tilt
- 4050.0 psi
- Lift Cylinder – Bore
- 7.5 in
- Lift Cylinder – Stroke
- 45.0 in
- Tilt Cylinder – Bore
- 6.7 in
- Tilt Cylinder – Stroke
- 28.4 in
- Rackback
- 4.5 Seconds
- Raise
- 9 Seconds
- Dump
- 3.5 Seconds
- Total Hydraulic Cycle Time
- 21.3 Seconds
- Lower
- 5.2 Seconds
- Lower Float Down
- 4.3 Seconds
- Fuel Tank
- 159.0 gal
- Crankcase
- 9.0 gal
- Transmission
- 20.0 gal
- Hydraulic System (tank only)
- 33.0 gal
- Differentials and Final Drives – Front
- 49.0 gal
- Differentials and Final Drives – Rear
- 45.0 gal
- Axle Oil
- 94.0 gal
- Cooling Systems
- 24.0 gal
- Hydraulic System Factory Fill
- 87.0 gal
- Bucket Capacities
- 5-10.3 m3 (6.5-13.5 yd3)
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±12.5°
- Brakes
- SAE J1473 OCT90, ISO 3450:1992
- Steering System – Circuit
- Load Sense
- Steering System – Pump
- Piston, variable displacement
- Maximum Flow @ 2,284 rpm
- 52.0 gal/min
- Steering Cutoff Pressure
- 4000.0 psi
- Total Steering Angle
- 70 degrees