814F Series 2 Wheel Dozer
Top performance… Caterpillar design combines power, mobility and operator comfort for high productivity. Reliable, durable operation… Rugged construction and easy maintenance provide long life with low operating costs.
- Technical Specs
- Standard Equipment
- Engine Model
- Cat® C9 ACERT™
- Net Power
- 232.0 hp
- Flywheel Power
- 232.0 hp
- Gross Power
- 253.0 hp
- Net Power - EEC 80/1269
- 235.0 hp
- Net Power - ISO 9249
- 235.0 hp
- Net Power - SAE J1349 (JAN90)
- 232.0 hp
- Bore
- 4.4 in
- Stroke
- 5.9 in
- Displacement
- 537.0 in3
- Torque Rise
- 30.0 %
- Cylinders
- 6
- Number of Forward Speeds
- 4
- Number of Reverse Speeds
- 4
- Forward 1
- 3.6 mph
- Forward 2
- 6.4 mph
- Forward 3
- 11.2 mph
- Forward 4
- 19.3 mph
- Reverse 1
- 4.1 mph
- Reverse 2
- 7.3 mph
- Reverse 3
- 12.7 mph
- Reverse 4
- 21.8 mph
- Lift cylinder, bore and stroke
- 120.62 mm x 913.9 mm 4.74 in x 35.98 in
- Steering cylinder, bore and stroke
- 101.6 mm x 597 mm 3.99 in x 23.5 in
- Relief valve setting
- 2255.0 psi
- Brakes
- Meet OSHA regulations
- Front
- Fixed
- Rear
- Oscillating ±12°
- Steering Angle
- ±36°
- Turning Radius, Outside Corner of Blade
- 23.5 ft
- Turning Radius, Inside Corner of Blade
- 12.2 ft
- Standard Tire Size
- 26.5 R25 XHA MX L3
- Tires
- L3 rock tread
- Operating Weight
- 47877.0 lb
- Fuel Tank - standard
- 117.8 gal
- Cooling System
- 14.5 gal
- Crankcase
- 9.0 gal
- Transmission
- 13.2 gal
- Hydraulic Tank
- 23.2 gal
- Differentials and Final Drives - Front
- 17.1 gal
- Differentials and Final Drives - Rear
- 17.1 gal
- Cab
- Meets SAE and ISO standards
- ROPS/FOPS
- Standard
- Turning Circle w/Blade
- 4703.4 ft
- Ground Clearance
- 14.41 in
- Standards
- Meet required standards
- Blade Capacities
- 2.66 m3
- Straight Blade - Capacity
- 3.49 yd3
- Moldboard Length
- 11.8 ft
- Straight Blade - Overall Width
- 11.8 ft
- Straight Blade - Height
- 3.6 ft
- Straight Blade - Digging Depth
- 1.73 ft
- Maximum Lift Above Ground
- 2.36 ft
- Blade Tip Angle - Total
- 51.9 Degrees
- Blade Tip Angle - Forward
- 10.0 Degrees
- Blade Tip Angle - Back
- 4.5 Degrees
- Blade Tilt Angle - Right
- 4.5 Degrees
- Blade Tilt Angle - Left
- 8.0 Degrees
- Straight Blade - Maximum Tilt
- 2.6 ft
- Straight Blade - Total Operating Weight
- 47868.91 lb
- Height to Top of Cab
- 10.91 ft
- Height to Top of Exhaust Pipe
- 10.84 ft
- Height to Top of Hood
- 7.79 ft
- Ground Clearance to Bumper
- 2.45 ft
- Height to Bottom of Ladder
- 1.45 ft
- Center Line of Rear Axle to Edge of Bumper
- 6.14 ft
- Center Line of Rear Axle to Hitch
- 5.5 ft
- Wheelbase
- 11.0 ft
- Length with Blade on Ground
- 22.58 ft
- Ground Clearance
- 1.2 ft
-
ELECTRICAL
- Alarm, backup
- Alternator (80 amp)
- Batteries, maintenance-free (2)
- Diagnostic connectors
- Lighting system, halogen (front, rear and cab-mounted)
- Starting and charging system (24-volt)
- Starting receptacle for emergency start
-
OPERATOR ENVIRONMENT
- Blade control system locks
- Array
- Coat hook
- Cigar lighter and ashtray
- Array
- Dome light (cab)
- Fuses, blade-type, in-cab
- Heater and defroster
- Horn, electric (steering wheel mounted)
- Hydraulic steering
- Lunchbox and beverage holder
- Mirrors, rearview (internally-mounted)
- Seat, mechanical suspension
- Seat belt, retractable, 76 mm (3 in) wide
- Array
-
POWER TRAIN
- Brakes, hydraulic enclosed, wet-disc service brakes
- Engine, Cat® C9 ACERT™
- Fuel priming pump
- Muffler
- Radiator, Next Generation Modular (NGMR)
- Starting aid (ether)
- Torque converter
- Array