D11T/D11T CD Dozer
D11T/D11T CD Dozer
Continue BrowsingCat® large dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. By optimizing performance and simplifying serviceability with our modular design, our machines move more material efficiently and safely at a lower cost per ton. These models include safety enhancements, improved operator comfort, and productivity increasing electronic features to keep your business strong for generations to come.
- Technical Specs
- Engine Model
- Cat® C32 ACERT™
- Flywheel Power
- 850 hp
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Displacement
- 1959 in3
- Net SAE J1349/ISO 9249
- 850 hp
- Engine Power – ISO 14396
- 908 hp
- Engine Power – Gross SAE J1995*
- 913 hp
- Emissions
- U.S. EPA Tier 4 Final
- Engine Power – Net SAE J1349/ISO 9249
- 850 hp
- Note
- * Excludes all fan losses.
- Note
- Engine ratings apply at 1,800 rpm.
- Note
- Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
- Note
- No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
- Operating Weight
- 229800 lb
- Shipping Weight
- 82640 lb
- Operating Weight – CD
- 248500 lb
- Shipping Weight – CD
- 83340 lb
- Note
- D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
- Note
- D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
- Note
- D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
- Note
- D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn’t include ROPS, ripper, blade, track, or roller frames.
- 1 Forward
- 2.4 mph
- 2 Forward
- 4.2 mph
- 3 Forward
- 7.3 mph
- 1 Reverse
- 2.9 mph
- 2 Reverse
- 5.1 mph
- 3 Reverse
- 8.7 mph
- Type
- Planetary powershift
- Transmission Clutch Diameter
- 21.0 in
- D11T CD – Carrydozer Relief Valve Setting
- 3500.0 psi
- D11T CD – Pump Output (Implement)
- 177.0 gal/min
- D11T CD – Pump Type
- Gear-type pump
- D11T CD – Ripper (Lift) Relief Valve Setting
- 3500.0 psi
- D11T CD – Ripper (Pitch) Relief Valve Setting
- 3500.0 psi
- D11T CD – Tilt Cylinder Flow
- 66.0 gal/min
- D11T CD – Tilt Cylinder Relief Valve Setting
- 3600.0 psi
- D11T – Bulldozer Relief Valve Setting
- 3300.0 psi
- D11T – Combined Pump Output (Implement)
- 164.0 gal/min
- D11T – Pump Type
- Gear-type pump
- D11T – Ripper (Lift) Relief Valve Setting
- 3300.0 psi
- D11T – Ripper (Pitch) Relief Valve Setting
- 3300.0 psi
- D11T – Tilt Cylinder Relief Valve Setting
- 3525.0 psi
- D11T – Tilt Pump Flow
- 41.0 gal/min
- Note
- Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
- Note
- Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
- Note
- Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
- Shoe Type
- Extreme Service
- Width of Shoe
- 28.0 in
- Shoes/Side
- 41
- Grouser Height
- 4.0 in
- Pitch
- 12.5 in
- Track Gauge
- 114.0 in
- Length of Track on Ground
- 175.0 in
- Ground Contact Area
- 9781 in2
- Track Rollers/Side
- 8
- Number of Carrier Rollers
- 1 per side (optional)
- Width of Shoe – CD
- 36.0 in
- Ground Clearance*
- 30.6 in
- Ground Contact Area – CD
- 12605 in2
- Note
- * Includes grouser height for total dimensions on hard surface.
- Note
- Sleeve Bearing Track with Positive Pin Retention.
- Fuel Tank
- 425 gal
- Cooling System
- 71.1 gal
- Engine Crankcase*
- 27.2 gal
- Power Train
- 90.9 gal
- Final Drives (each)
- 12.4 gal
- Roller Frames (each)
- 24.8 gal
- Pivot Shaft Compartment
- 18.8 gal
- Implement Hydraulic System Tank Only
- 58.9 gal
- Fuel Tank – High Capacity
- 505 gal
- Fuel Tank – Platform Ready
- 470 gal
- Note
- * With oil filters.
- Oscillation
- 13.8 in
- Hydraulically applied multiple-disc Steering Clutch
- 17.3 in
- Spring applied multiple-disc Brake
- 24.1 in
- ROPS
- Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
- FOPS
- Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
- Sound
- The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
- Sound
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
- Ground Clearance*
- 31.4 in
- Track Gauge
- 114.0 in
- Width without Trunnions (Standard Shoe)
- 148.9 in
- Width over Trunnions
- 172.4 in
- Height (FOPS Cab)*
- 173.4 in
- Height (Top of Stack)*
- 179.1 in
- Height (ROPS/Canopy)*
- 185.9 in
- Drawbar Height (Center of Clevis)*
- 37.1 in
- Length of Track on Ground
- 175.0 in
- Overall Length Basic Tractor
- 242.5 in
- Length Basic Tractor with Drawbar
- 242.5 in
- Length with SU-Blade
- 337.8 in
- Length with U-Blade
- 340.2 in
- Length with Single-Shank Ripper
- 319.2 in
- Length with Multi-Shank Ripper
- 331.8 in
- Overall Length SU-Blade and SS Ripper
- 414.4 in
- Note
- *Includes grouser height for total dimensions on hard surfaces.
- Note
- D11T shown equipped with 710 mm (28 in) shoes.
- Ground Clearance*
- 31.4 in
- Track Gauge
- 114.0 in
- Width without Trunnions (Standard Shoe)
- 149.8 in
- Width over Trunnions
- 172.4 in
- Height (FOPS Cab)*
- 173.4 in
- Height (Top of Stack)*
- 179.1 in
- Height (ROPS/Canopy)*
- 185.9 in
- Drawbar Height (Center of Clevis)*
- 37.1 in
- Length of Track on Ground
- 175.0 in
- Overall Length Basic Tractor
- 242.5 in
- Length Basic Tractor with Drawbar
- 242.5 in
- Length with SU-Blade**
- 345.1 in
- Length with Single-Shank Ripper
- 319.2 in
- Length with Multi-Shank Ripper
- 331.8 in
- Overall Length SU-Blade and SS Ripper**
- 421.7 in
- Note
- *Includes grouser height for total dimensions on hard surfaces.
- Note
- **CD Blade on D11T CD.
- Note
- D11T shown equipped with 710 mm (28 in) shoes.