AP255E Paver
With a single operator, the AP255E meets all requirements for small and medium sized jobsites. Easy, simplified driving – with controls which give precise, immediate response. The AP255E is a compact, extremely versatile paver finisher, ideal for small jobsites in urban centers. For sidewalks, cycle paths, playgrounds, trench back filling and all maintenance and repair work, where it shows its notable qualities and features. This paver is designed to operate in limited spaces, thanks to its compactness and exceptional maneuverability.
- Technical Specs
- Optional Equipment
- Maximum Operating Weight
- 9921.0 lb
- Operating Weight with Screed
- 9921.0 lb
- Standard Paving Width
- 1400 mm - 2600 mm (4.6 - 8.5 ft)
- Paving Width Minimum
- 0.5 ft
- Paving Width Maximum
- 11.08 ft
- Hopper Capacity
- 109.0 ft3
- Inside Turning Radius
- 2.3 ft
- Maximum Paving Speed with Vibratory Screed
- 108.0 ft/min
- Maximum Travel Speed
- 2.0 mph
- Truck Dump Height
- 23.0 in
- Truck Entry Width
- 9.8 ft
- Gross Power
- 46.0 hp
- Displacement
- 135.0 in3
- Engine Model
- Cat C2.2
- Track Contact Length
- 4.6 ft
- Overall height
- 8.3 ft
- Inside Turning Radius
- 2.3 ft
- Length with Push Roller and Largest Screed
- 13.8 ft
- Length with push roller & screed
- 13.8 ft
- Maximum Height
- 8.3 ft
- Tractor Operating Width
- 9.83 ft
- Transport Height
- 5.75 ft
- Transport Width, Hoppers Raised, Screed End Gates Attached
- 5.25 ft
- Fuel Tank Capacity
- 17.0 gal
- Hydraulic Oil Tank
- 19.28 gal
- Cooling System
- 4.49 gal
- Maximum Paving Speed
- 108.27 ft/min
- Hopper Capacity
- 109.48 ft3
- Power supply, 110V or 230V
- Grade & Slope Control
- Mechanical Feed Sensor
- Central Paving Width Reduction Package - 0.5 m to 1.40 m
- Right Side Paving Width Reduction Package - 0.15 m to 1.00 m
- Mechanical (bolt-on) extensions to reach 3.40 m paving width