963K WH Waste Handler Track Loader
From loading to sorting to excavation and spreading cover material, the track loader is one of the most versatile pieces of equipment in your landfill or transfer station. The Waste Handling Arrangement features added guarding and seals to gives you a machine that is purpose built to take on the challenges of waste applications. A choice of buckets and track shoes allow you to further optimize the machine for greater performance and service life. The new 963K offers added fuel efficiency over the previous model, as well as greater comfort and improved implement and steering response. The 963K meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards.
- Technical Specs
- Engine Model
- Cat® C7.1 ACERT™
- Engine Power (Maximum) – ISO 14396
- 221 hp
- Engine Power (Maximum) – ISO 14396 (DIN)
- 224 hp
- Net Power (Rated) – ISO 9249/SAE J1349
- 193 hp
- Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
- 196 hp
- Emissions
- Tier 4 Final/Stage IV/Korea Tier 4
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Displacement
- 427.8 in3
- Track Gauge
- 72.8 in
- Track on Ground
- 100 in
- Track Shoe Type
- Double Grouser
- Track Shoe Width – Standard
- 21.6 in
- Track Shoe Width – Optional
- 17.7 in
- Ground Contact Area – Standard Shoe
- 4340 in2
- Ground Contact Area – Optional Shoe
- 3565 in2
- Ground Pressure – Standard Shoe
- 10.3 psi
- Ground Pressure – Optional Shoe
- 12.4 psi
- Track Rollers – Each Side
- 7
- Number of Shoes – Each Side
- 38
- Grouser Height – Double Grouser
- 1.65 in
- Fuel Tank
- 84.5 gal
- Cooling System
- 8.45 gal
- Crankcase (with filter)
- 4.4 gal
- Final Drives (each)
- 4 gal
- Hydraulic Tank
- 23.7 gal
- Pivot Shaft
- 0.5 gal
- DEF Tank
- 4.22 gal
- Operating Weight
- 46518 lb
- Capacity - General Purpose Landfill
- 4.05 yd3
- Capacity – General Purpose
- 3.2 yd3
- Capacity – Landfill
- 4.05 yd3
- Capacity – Multi-Purpose
- 2.48 yd3
- Capacity – Performance Series
- 3.66 yd3
- Bucket Width – Landfill
- 102.8 in
- Bucket Width – General Purpose
- 102.8 in
- Bucket Width – Performance Series
- 106.8 in
- Bucket Width – Multi-Purpose
- 101.3 in
- Type
- Radial
- Number of Pockets
- 3
- Overall Width/Beam
- 76.7 in
- Penetration
- 11.6 in
- Ripping Width
- 72.3 in
- Shank Cross Section
- 58.5 mm × 138 mm (50 in × 5.4 in)
- Ground Clearance
- 23.4 in
- Cylinders – Bore
- 4.5 in
- Cylinders – Stroke
- 11.3 in
- Added Machine Length with Ripper in Transport Position
- 24.0 in
- Track Motor
- Two, variable displacement, bent axis motors
- Drive System
- Hydrostatic drive with infinite machine speeds to 10.0 km/h (6.2 mph)
- Drive Pump
- Two, variable displacement, slipper-type axial piston pumps
- Relief Valve Setting
- 6890 psi
- Lift
- 5.5 seconds
- Power Down
- 3.7 seconds
- Float Down
- 2.0 seconds
- Dump at Maximum Height (from full rackback)
- 1.3 seconds
- Rackback at Maximum Height (from full dump)
- 1.4 seconds
- Type
- Closed center, load sensing piston
- Output
- 60.8 gal/min
- Main Relief Valve Setting
- 3989 psi
- ROPS
- Meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994 DLV criteria SAE J397B, ISO 3164:1995
- FOPS
- Meets SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II DLV criteria SAE J397B, ISO 3164:1995
- Brakes
- Meet SAE J/ISO 10265 MAR99 ISO 10265:1998
- Cab
- Declared dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:2008†is used to measure value for enclosed cab
- Cab
- Hearing protection is recommended when operating with an open operator station and cab
- Cab
- Declared exterior sound power level is 108 dB(A) when value is measured according to “ISO 6395:2008â€
- Cab
- The labeled sound power level is 111 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC.
- Overall Machine Width without Bucket: With Standard Tracks – 550 mm (21.6 in) Shoes
- 94.5 in
- Overall Machine Width without Bucket: With Narrow Tracks – 450 mm (17.7 in) Shoes
- 90.5 in
- Ground Clearance
- 18.5 in
- Machine Height to Top of Cab
- 130.9 in
- Length to Front of Track
- 197.0 in
- Overall Machine Length*
- 278.0 in
- Carry Position Approach Angle
- 15°
- Digging Depth*
- 5.4 in
- Maximum Rollback at Ground
- 43°
- Maximum Rollback at Carry Position
- 50°
- Bucket Height in Carry Position
- 18.0 in
- Reach at Full Lift Height and 45° Dump*
- 54.0 in
- Clearance at Full Lift Height and 45° Dump*
- 114.8 in
- Maximum Rollback, Fully Raised
- 52°
- Maximum Dump, Fully Raised
- 53°
- Grading Angle
- 63°
- Height to Bucket Hinge Pin
- 155.1 in
- Overall Machine Height, Bucket Fully Raised
- 212.7 in
- Height to Top of Seat with Headrest
- 110.6 in
- Height to Top of Stack
- 115.7 in
- Ramp Angle
- 29°
- Note
- * With general purpose bucket and extra duty teeth.