AD30 Underground Mining Truck
The AD30 underground mining truck is designed for high production, low cost-per-ton hauling in smaller underground mining applications. Rugged construction and easy maintenance guarantee long life with low operating costs. Engineered for performance, designed for comfort, built to last.
- Technical Specs
- Engine Model
- Cat® C15 ACERT™
- Rated Power
- 1800 rpm
- Gross Power - SAE J1995
- 409 hp
- Net Power – 80/1269/EEC
- 377.0 hp
- Gross Power - VR Engine - SAE J1995
- 409 hp
- Gross Power - Tier 3 Engine - SAE J1995
- 409 hp
- Bore
- 5.4 in
- Stroke
- 6.8 in
- Displacement
- 928.0 in3
- Gross Machine Mass
- 132300 lb
- Nominal Payload Capacity
- 66139 lb
- Body Capacities
- 11.3-17.5 m3 (14.8-22.9 yd3)
- Empty
- 63647.0 lb
- Front Axle
- 42944.0 lb
- Rear Axle
- 20704.0 lb
- Loaded
- 132277.0 lb
- Front Axle
- 58451.0 lb
- Rear Axle
- 73826.0 lb
- Front Axle
- 67.5 %
- Rear Axle
- 32.5 %
- Front Axle
- 44.2 %
- Rear Axle
- 55.8 %
- Forward 1
- 4.2 mph
- Forward 2
- 7.6 mph
- Forward 3
- 13.9 mph
- Forward 4
- 25.4 mph
- Reverse 1
- 4.8 mph
- Differential Ratio
- 3.38:1
- Final Drive Ratio
- 4.76:1
- Total Reduction Ratio
- 16.13:1
- Raise
- 10.5 Seconds
- Lower
- 11.2 Seconds
- Total Cycle Time
- 21.7 Seconds
- Body 1
- 14.8 yd3
- Body 2 (Standard Body)
- 18.8 yd3
- Body 3
- 22.9 yd3
- Wide Body
- 21.9 yd3
- Ejector Body
- 19.9 yd3
- Ejector Body
- 22.6 yd3
- Outside Clearance Radius
- 337.4 in
- Inner Clearance Radius
- 198.0 in
- Axle Oscillation
- 10.0 Degrees
- Articulation Angle
- 42.5 Degrees
- Tunnel Clearance Height
- 157.5 in
- Height to Top of Load (2:1)
- 123.3 in
- Loading Height
- 93.9 in
- Overall Height – Body Raised
- 220.5 in
- Height to Top of ROPS
- 102.4 in
- Overall Length
- 4000.0 in
- Wheelbase
- 204.7 in
- Ground Clearance
- 15.7 in
- Dump Clearance
- 22.0 in
- Rear Wheel to Body Raised
- 41.8 in
- Rear Axle to Tail
- 63.3 in
- Max Overall Length
- 423.0 in
- Centerline of Front Axle to Centerline of Hitch
- 70.9 in
- Front Axle to Front Bumper
- 131.7 in
- Height to Top of Body
- 100.3 in
- Overall Tire Width
- 104.3 in
- ROPS Standards
- ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
- FOPS Standards
- FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.
- Engine Crankcase with Filter
- 9.0 gal
- Transmission
- 18.0 gal
- Hydraulic Tank
- 87.0 gal
- Cooling System
- 20.0 gal
- Front Differentials and Final Drives
- 15.0 gal
- Rear Differentials and Final Drives
- 15.0 gal
- Fuel Tank
- 132.0 gal
- Tire Size
- 26.5 × R25 VSNT
- Standards
- ISO3450, AS2958.1, CAN-CSA424.30-M90