545D Wheel Skidder
Building on Caterpillar’s 40+ years’ experience designing and manufacturing skidders, the Cat® D Series Wheel Skidder delivers more productivity at lower operating cost. Get more wood to the landing faster in a stable machine with a roomy, comfortable environment for the operator. Advanced hydraulics speed up multi-functioning and cycle times and give you more lift capacity. The D Series runs cool and is designed to keep debris from collecting inside the machine. Tilting cab and other access points cut the time needed for daily maintenance and servicing.
- Technical Specs
- Gross Power
- 250 hp
- Engine Model
- Cat C7.1 ACERTâ„¢
- Displacement
- 428 in3
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Max Torque @ Rated Speed
- 922 N-m at 1,400 RPM
- Derating Altitude
- 9843 ft
- Electrical System
- 24V
- Battery - Quantity
- 2
- Battery - Volts
- 12V
- Battery - Capacity
- 950 CCA
- Number of Cylinders
- 6
- Travel Speed - Fwd. 1st
- 3.5 mph
- Travel Speed - Fwd. 2nd
- 4.7 mph
- Travel Speed - Fwd. 3rd
- 6.5 mph
- Travel Speed - Fwd. 4th
- 8.8 mph
- Travel Speed - Fwd. 5th
- 11.8 mph
- Travel Speed - Rev. 1st
- 3.5 mph
- Travel Speed - Rev. 2nd
- 6.5 mph
- Travel Speed - Rev. 3rd
- 11.8 mph
- Travel Speed - Fwd. 6th
- 12.4 mph
- Transmission
- Countershaft Powershift
- Transmission Cooler Type
- Water to Oil
- Service
- Enclosed wet single disc
- Transmission Cooler Type
- Spring applied, hydraulically released
- Type
- Load sense, closed center
- Pump Type
- Variable displacement piston pump
- Pump Output
- 58 gal/min
- Weight - Dual Function
- 46717 lb
- Weight - Cable
- 42665 lb
- Ground level to top arch/boom* - Cable
- 109.6 in
- Ground level to top arch/boom* - Dual Function
- 177.8 in
- Ground level to axle center line*
- 33.2 in
- Overall length - Cable
- 298.6 in
- Overall length - Dual Function
- 347.5 in
- Ground clearence*
- 21.7 in
- Blade lift height*
- 56.1 in
- Blade dig depth*
- 20.8 in
- Height to top of cab*
- 133.3 in
- Blade width - Standard
- 105.4 in
- Blade width - Wide
- 123.5 in
- Overall width - 30.5L-32 NOAW
- 126.6 in
- Overall width - 30.5L-32 2X Ring
- 126.6 in
- Overall width - 30.5L-32
- 133.3 in
- Overall width - 35.5L-32 NOAW
- 139.1 in
- Overall width - 35.5L-32
- 145.8 in
- Wheelbase
- 155.1 in
- Lift height, furthest - Dual Function
- 86.6 in
- Lift height, retracted - Dual Function
- 118.3 in
- Lift lowest, retracted - Dual Function
- 44.3 in
- Lift lowest, furthest - Dual Function
- 14.9 in
- Ground level to axle center line* - Dual Function
- 33.2 in
- Reach highest, retracted - Dual Function
- 64.0 in
- Reach lowest, retracted - Dual Function
- 74.1 in
- Reach lowest, furthest - Dual Function
- 112.7 in
- Reach highest, furthest - Dual Function
- 118.4 in
- Grapple capacity
- 19.0 ft2
- Tip to tip height
- 35.0 in
- Tong opening
- 135.0 in
- Full open height
- 74.0 in
- Minimum stem diameter
- 9.5 in
- Full closed height
- 58.0 in
- Type
- Hydraulically driven
- Max Line Pull - Bare Drum
- 40016 lbf
- Max Line Speed
- 134 ft/min
- Drum Diameter
- 9 in
- Drum Width
- 10 in
- Drum Capacity 19.0mm (3/4in)
- 195 ft
- Drum Capacity 25.4mm (1in)
- 85 ft
- Type
- Hydraulically driven
- Max Line Pull - Bare Drum
- 40016 lbf
- Max Line Speed
- 280 ft/min
- Drum Diameter
- 9 in
- Drum Width
- 10 in
- Drum Capacity 19.0mm (3/4in)
- 195 ft
- Drum Capacity 25.4mm (1 in)
- 85 ft
- Fuel Tank
- 99.8 gal
- Cooling System
- 15.1 gal
- Differential, Final Drive - Front
- 13.7 gal
- Differential, Final Drive - Rear
- 13.7 gal
- Engine Oil
- 7.1 gal
- Transmission, Torque Converter
- 14.3 gal
- Parking Brake
- 14.4 oz
- Differential, Final Drive - Tank
- 17.2 gal
- Differential, Final Drive - Total
- 32.5 gal
- DEF Tank
- 5.0 gal