24M Motor Grader - Puckett Rents

Warning: array_values() expects parameter 1 to be array, bool given in /home/puckettr/public_html/wp-content/themes/puckett/cat-new-feed/single.php on line 14

The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. The 24M is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. Unprecedented operator comfort and ease of service help to maximize your return on investment.

Engine

Base Power (1st gear) - Net: 533.0 hp
Engine Model: CatÂ® C18 ACERTâ„¢
Base Power (all gears) - Net: 533.0 hp
Base Power (all gears) - Net (Metric): 540.0 hp
Displacement: 1104.5 in3

Power Train

Forward/Reverse Gears: 6 Forward/3 Reverse
Transmission: Automatic, electronic power shift
Brakes - Service: Oil-actuated, oil-disc
Brakes - Service, Surface Area: 15733.0 in2
Brakes - Parking: Spring applied, hydraulically released
Brakes - Secondary: Oil-actuated, oil-disc

Hydraulic System

Circuit Type: Electro-hydraulic load sensing, closed center
Pump Type: Variable piston
Pump Output: 145.0 gal/min
Maximum System Pressure: 3500.0 psi
Standby Pressure: 450.0 psi

Operating Specifications

Top Speed - Forward: 27.0 mph
Top Speed - Reverse: 25.8 mph
Turning Radius, Outside Front Tires: 40.68 ft
Steering Range - Left/Right: 47.5Â°
Articulation Angle - Left/Right: 25Â°
Forward - 1F: 2.3 mph
Forward - 2F: 3.6 mph
Forward - 3F: 6.0 mph
Forward - 4F: 9.4 mph
Forward - 5F: 17.4 mph
Forward - 6F: 27.0 mph
Reverse - 1R: 3.4 mph
Reverse - 2R: 9.0 mph
Reverse - 3R: 25.8 mph

Service Refill

Fuel Capacity: 350.0 gal
Cooling System: 24.0 gal
Hydraulic System - Total: 70.0 gal
Hydraulic System - Tank: 36.0 gal
Circle Drive Housing (each): 2.0 gal
Differential/Final Drives: 49.0 gal
Transmission Oil: 23.0 gal
Engine Oil: 16.0 gal
Tandem Housing (each): 85.0 gal
Front Wheel Spindle Bearing Housing: 1.0 gal

Frame

Drawbar - Width: 8.9 in
Circle - Diameter: 103.6 in
Circle - Blade Beam Thickness: 6.3 in
Drawbar - Height: 8.5 in
Height - Front Axle Center: 33.8 in
Drawbar - Thickness: 0.6 in
Front-Top/Bottom Plate - Width: 20.2 in
Front-Top/Bottom Plate - Thickness: 2.0 in
Front-Side Plates - Width: 16.3 in
Front-Side Plates - Thickness: 1.0 in
Front Axle - Height to Center: 32.2 in
Front Axle - Wheel Lean, Left/Right: 18Â°
Front Axle - Total Oscillation per Side: 32Â°

Tandems

Height: 41.0 in
Width: 13.9 in
Sidewall Thickness - Inner: 1.0 in
Sidewall Thickness - Outer: 1.2 in
Drive Chain Pitch: 3.0 in
Wheel Axle Spacing: 90.0 in
Tandem Oscillation - Front Up: 20Â°
Tandem Oscillation - Front Down: 20Â°

Moldboard

Blade Width: 24.0 ft
Arc Radius: 21.7 in
Throat Clearance: 6.4 in
Cutting Edge - Width: 13.0 in
Cutting Edge - Thickness: 1.1 in
End Bit - Width: 8.0 in
End Bit - Thickness: 1.0 in
Blade Pull - Base: 86500.0 lb
Blade Pull - Maximum: 95940.0 lb
Down Pressure - Base: 69583.0 lb
Down Pressure - Maximum: 75654.0 lb
Height: 40.0 in
Thickness: 2.0 in
Width: 24.0 ft

Blade Range

Circle Centershift - Right: 210.2 in
Circle Centershift - Left: 209.9 in
Moldboard Sideshift - Right: 193.0 in
Moldboard Sideshift - Left: 178.3 in
Maximum Blade Position Angle: 35Â°
Blade Tip Range - Forward: 40Â°
Blade Tip Range - Backward: 0Â°
Maximum Lift above Ground: 25.0 in
Maximum Depth of Cut: 25.9 in
Maximum Shoulder Reach Outside of Tires - Right: 127.1 in
Maximum Shoulder Reach Outside of Tires - Left: 126.9 in

Ripper

Ripping Depth - Maximum: 17.9 in
Ripper Shank Holders: 7
Shank Holder Spacing - Minimum: 23.4 in
Shank Holder Spacing - Maximum: 23.8 in
Penetration Force: 29985.0 lb
Pryout Force: 41052.0 lb

Weights

Operating Weight - Typically Equipped: 145151.0 lb
Gross Vehicle Weight - Typically Equipped: 145151.0 lb
Gross Vehicle Weight - Maximum - Rear Axle: 107001.0 lb
Gross Vehicle Weight - Base - Front Axle: 42177.0 lb
Gross Vehicle Weight - Base - Rear Axle: 96110.0 lb
Gross Vehicle Weight - Maximum - Total: 152857.0 lb
Gross Vehicle Weight - Maximum - Front Axle: 45856.0 lb
Gross Vehicle Weight - Base - Total: 138287.0 lb
Gross Vehicle Weight - Typically Equipped - Front Axle: 43100.0 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle: 102051.0 lb
Gross Vehicle Weight - Typically Equipped - Total: 145151.0 lb

Standards

Brakes: ISO 3450
ROPS/FOPS: ISO 3471/ISO 3449
Sound: ISO 6394/ISO 6395
Steering: ISO 5010

Engine - U.S. EPA Tier 4 Interim Certified

Base Power (all gears) - Net: 533.0 hp
Base Power (all gears) - Net (Metric): 540.0 hp
Bore: 5.7 in
Derating Altitude: 9655.0 ft
Displacement: 1104.5 in3
Engine Model: CatÂ® C18 ACERTâ„¢
Maximum Torque - Net: 2001.0 lb ft
Number of Cylinders: 6
Speed @ Rated Power: 1800.0 RPM
Standard - Ambient Capability: 122.0 Â° F
Standard - Fan Speed - Maximum: 1325.0 RPM
Standard - Fan Speed - Minimum: 60.0 RPM
Stroke: 7.2 in

Engine - Tier 2

Base Power (all gears) - Net: 533.0 hp
Base Power (all gears) - Net (Metric): 540.0 hp
Bore: 5.7 in
Derating Altitude: 10000.0 ft
Displacement: 1104.5 in3
Engine Model: Cat C18 ACERT
Maximum Torque - Net: 2001.0 lb ft
Number of Cylinders: 6
Speed @ Rated Power: 1800.0 RPM
Standard - Ambient Capability: 122.0 Â° F
Standard - Fan Speed - Maximum: 1325.0 RPM
Standard - Fan Speed - Minimum: 60.0 RPM
Stroke: 7.2 in
Torque Rise - Net: 30.0 %