993K Wheel Loader - Puckett Rents

Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Introduced in 2008 the success of the 993K is a testament to its heritage. Created from Cat Large Wheel Loader DNA, the roots of performance, durability, comfort and efficiency runs deep. Move more make more with the 993K.

Engine

Net Power: 973.0 hp

Operating Specifications

Operating Weight: 294687.0 lb
Cat Truck Match – High Lift: 777, 785
Bucket Range: 12.2-23.7 m3 (16.0-31.0 yd3)
Cat Truck Match – Standard Lift: 777
Operating Weight (Tier 2 Equivalent)*: 294687 lb
Operating Weight (Tier 4 Final)*: 294687 lb
Operating Weight*: 294687 lb
Rated Payload – High Lift: 27.5 tons
Rated Payload – Standard Lift: 30.0 tons
Articulation Angle: 43.0 Degrees
Note: * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).

Transmission

Transmission Type: Cat Planetary Power Shift
Forward 1: 4.2 mph
Forward 2: 7.4 mph
Forward 3: 12.7 mph
Reverse 1: 4.7 mph
Reverse 2: 8.1 mph
Reverse 3: 13.9 mph
Direct Drive – Forward 1: Lock-up disabled
Direct Drive – Forward 2: 8.0 mph
Direct Drive – Forward 3: 14.1 mph
Direct Drive – Reverse 1: 4.9 mph
Direct Drive – Reverse 2: 8.8 mph
Direct Drive – Reverse 3: 15.6 mph
Note: 50/65-51 BFOR (311-1938), calculated speeds.

Hydraulic System – Lift/Tilt

Maximum Flow at 1,650 rpm: 311.0 gal/min
Lift/Tilt System – Circuit: Positive Flow Control
Lift/Tilt System – Pump: Variable Piston
Relief Valve Setting – Lift/Tilt: 4200.0 psi
Cylinders – Lift/Tilt: Double-acting
Lift Cylinder – Bore: 10.5 in
Lift Cylinder – Stroke: 66.2 in
Tilt Cylinder – Bore: 9.3 in
Tilt Cylinder – Stroke: 40.9 in
Note: High Lift configuration.

Hydraulic Cycle Time

Rackback: 2.4 seconds
Raise: 9.2 seconds
Dump: 1.8 seconds
Total Hydraulic Cycle Time: 17.2 seconds
Lower: 3.8 seconds
Lower Float Down: 3.1 seconds
Note: High Lift configuration, calculated speeds.

Service Refill Capacities

Fuel Tank: 573.3 gal
Cooling System: 80.2 gal
Crankcase: 31.7 gal
Transmission: 52.0 gal
Hydraulic System (tank only): 146.0 gal
Differentials and Final Drives – Front: 127.3 gal
Differentials and Final Drives – Rear: 127.3 gal
Hydraulic System Factory Fill: 230.0 gal
Note: High Lift configuration.

Buckets

Bucket Capacities: 12.2-23.7 m3 (16.0-31.0 yd3)

Axles

Front: Fixed
Rear: Trunnion
Oscillation Angle: 10 degrees

Hydraulic System – Steering

Steering System – Circuit: Closed
Steering System – Pump: Piston, variable displacement
Relief Valve Setting – Steering: 5000 psi
Maximum Flow @ 1,985 rpm (6900 kPa/1,000 psi): 133 gal/min
Total Steering Angle: 86 degrees

Engine (Tier 4 Final)

Bore: 5.7 in
Displacement: 1959 in3
Emissions: U.S. EPA Tier 4 Final
Engine Model: Cat® C32 with ACERT™ Technology
Gross Power – SAE J1995: 1039.0 hp
Net Power – EEC 80/1269: 973 hp
Net Power – ISO 14396: 1024 hp
Net Power – ISO 9249: 973 hp
Net Power – SAE J1349: 964 hp
Peak Torque @ 1,250 rpm: 4034 lb ft
Rated Speed: 1800 rpm
Stroke: 6.4 in
Torque Rise: 33%
Note: Standard ambient cooling.

Engine (Tier 2 Equivalent)

Bore: 5.7 in
Displacement: 1959 in3
Emissions: U.S. EPA Tier 2 Equivalent
Engine Model: Cat C32 with ACERT Technology
Gross Power – SAE J1995: 1041 hp
Net Power – EEC 80/1269: 973 hp
Net Power – ISO 14396: 1024 hp
Net Power – ISO 9249: 973 hp
Net Power – SAE J1349: 964 hp
Peak Torque @ 1,250 rpm: 4034 lb ft
Rated Speed: 1800 rpm
Stroke: 6.4 in
Torque Rise: 33%
Note: Standard ambient cooling.

Sound

Dynamic Operator Sound Pressure (ISO 6396:2008): 70.0 dB(A)
Operator Sound Pressure (ANSI/SAE J1166 FEB08): 72.0 dB(A)
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated wi
Note: The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s

POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain filters
- Demand fan
- Driveline parking brake
- Engine, Cat C32 ACERT
- Fuel priming pump (electric)
- Ground level engine shutoff
- Precleaner, engine air intake (above hood)
- Radiator
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Rimpull Control System
- Transmission, planetary powershift, 3F/3R electronic control
ELECTRICAL
- Alarm, back-up
- Alternator, 150-amp
- Batteries, maintenance free, 4 – 1,400 CCA
- Deutsch terminal connectors
- Diagnostic connector starting and charging system
- Electrical system, 24 volt
- Electronic Service Center
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway
- Starter and charging system, 24V
- Starter receptacle for emergency start
- Starter and transmission lockouts (bumper)
OPERATOR ENVIRONMENT
- Advisor Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Air precleaner
- Cab, sound suppressed and pressurized, separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 10-amp) and power port
- Cigar lighter, ashtray
- Coat hook
- Controls, lift and tilt function
- Digital display on center console: – Gear – Ground speed – Machine hours
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Fuel level – Hydraulic oil temperature – Power train oil temperature – Tachometer
- Light, cab, dome
- Lunchbox, beverage and manual holders
- Mirrors, rearview (externally mounted)
- Rimpull Control System
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat, trainer with lap belt, 76 mm (3 in) wide
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- Transmission gear indicator
- Vital Information Management System (VIMS) with Advisor Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
- Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
OTHER
- Automatic bucket leveler
- Automatic lift and lower bucket kickout
- Axle ecology drain
- Bumper service center
- Deluxe filtration
- Emergency platform egress
- Front walkway
- Fuel, fast fill system
- Grouped hydraulic pressure ports
- Guards, crankcase and power train
- Hitch, drawbar with pin
- Implement and steering ecology drains
- Implement lock lever, cab
- Linkage pins, maintenance free
- Oil sampling valves
- Positive Flow Control implement system
- Product Link^™
- Rims
- Service center with ground level electrical and fluid connections
- Sight gauges for steering, implement and transmission oil
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering and transmission lock lever, cab
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper

POWER TRAIN
- –50° C (–58° F) antifreeze
- Engine coolant heater (120V)
- Engine coolant heater (240V)
ELECTRICAL
- LED warning strobe
- Object detection (radar)
- Power converter
- Rear vision camera
OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Satellite Sirius radio with bluetooth
- Sun screen
MACHINE CONTROL AND GUIDANCE
- Cat Terrain ready
SPARE RIMS
- 40.00×51 spare rim
MISCELLANEOUS ATTACHMENTS
- Axle oscillation limit stop
- Egress, powered rear access
- Rear roading fenders