854K Wheel Dozer - Puckett Rents

Cat Large Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Engineered for your demanding work in large dozing applications, the 854K Wheel Dozer is the largest in the Cat Wheel Dozer line and is an ideal match for large mining operations, power generating utilities, the general contracting industry and wherever mobility, versatility and compaction is needed.

Engine

Engine Model: Cat® C32 ACERT™
Gross Power: 907.0 hp
Bore: 5.7 in
Stroke: 6.4 in
Displacement: 1958.0 in3
Torque Rise: 30.0 %
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995: 907.0 hp
Emissions (Tier 2 Equivalent): Net Power ISO - 9249: 814.0 hp
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995: 900.0 hp
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249: 814.0 hp
Peak Torque @ 1,200 rpm: 3139.0 lb ft
Rated Speed: 1750.0 RPM

Weights

Operating Weight: 224254.0 lb
Operating Weight - Ripper: 241230.0 lb

Transmission

Converter Drive - Forward 1: 4.4 mph
Converter Drive - Forward 2: 7.7 mph
Converter Drive - Forward 3: 13.2 mph
Converter Drive - Reverse 1: 4.8 mph
Converter Drive - Reverse 2: 8.4 mph
Converter Drive - Reverse 3: 14.6 mph
Direct Drive - Forward 2: 8.1 mph
Direct Drive - Forward 3: 14.2 mph
Direct Drive - Reverse 1: 5.0 mph
Direct Drive - Reverse 2: 8.9 mph
Direct Drive - Reverse 3: 15.6 mph
Direct Drive - Forward 1: Lock-up disabled
Transmission Type: Cat Planetary Power Shift

Steering

Hydraulic Output at 1,883 rpm and 6900 kPa (1,000 psi): 124.0 gal/min
Relief Valve Setting: 5004.0 psi
Minimum Turning Radius (over bucket): 31.0 ft
Total Steering Angle: 82.0 Degrees
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi): 124.0 gal/min

Service Refill Capacities

Fuel Tank - Standard: 413.0 gal
Cooling System: 53.0 gal
Crankcase: 32.0 gal
Transmission: 45.0 gal
Differentials and Final Drives - Front: 98.0 gal
Differentials and Final Drives - Rear: 90.0 gal
Hydraulic System - Implement and Brakes (Tank Only): 81.0 gal
Hydraulic System - Steering and Engine Cooling Fan (Tank Only): 77.0 gal
Fuel Tank - Ripper: 353.0 gal

Cab

Air Conditioning: Standard air conditioning system contains environmentally friendly R134a refrigerant
Cab - ROPS/FOPS: Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Cab - ROPS/FOPS: SAE J11040 APR88, ISO 3471:2008, ISO 3471:1994
FOPS: FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
ROPS: ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.
Sound Performance: The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Sound Performance: The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance: Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance: The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).

Brakes

Brakes: Meets ISO 3540:1996

Axles

Front: Fixed
Rear: Oscillating at ±10 degrees
Maximum Single-Wheel Rise and Fall: 22.6 in

Blades

Blade Capacities: 25 to 45 m3 (33 to 58 yd3)

Engine (Tier 4)

Bore: 5.7 in
Displacement: 1959.0 in3
Emissions: U.S. EPA Tier 4 Final Capable
Engine Model: Cat C32 with ACERT Technology
Gross Power – SAE J1995: 907.0 hp
Net Power – ISO 9249: 814.0 hp
Net Power – SAE 1349: 814.0 hp
Note: Engine power ratings for machine with standard ambient cooling package.
Peak Torque @ (speed): 3129.0 ft-lb
Rated Speed: 1750.0 RPM
Stroke: 6.4 in
Torque Rise: 30.0 %

Engine (Tier 2)

Bore: 5.7 in
Displacement: 1959.0 in3
Emissions: U.S. EPA Tier 2 Equivalent
Engine Model: Cat C32 with ACERT Technology
Gross Power – SAE J1995: 907.0 hp
Net Power – ISO 9249: 814.0 hp
Net Power – SAE 1349: 814.0 hp
Note: Engine power ratings for machine with standard ambient cooling package.
Peak Torque @ (speed): 3129.0 ft-lb
Rated Speed: 1750.0 RPM
Stroke: 6.4 in
Torque Rise: 30.0 %

Model: 854K (Tier 4)

Serial Number Prefix: H8M

Weights (Tier 4)

Operating Weight: 224254.0 lb

Model: 854K (Tier 2)

Serial Number Prefix: H9K

Weights (Tier 2)

Operating Weight: 223027.0 lb

Hydraulic System – Lift/Tilt

Main Relief Pressure: 4496.0 psi
Output at 1883 rpm and 6900 kPa (1,000 psi): 122.0 gal/min

Hydraulic System - Lift/Tilt

Cylinder, Double-acting: Lift, Bore and Stroke: 177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double-acting: Tilt and Tip, Bore and Stroke: 267 mm × 286 mm (0.88 ft × 0.94 ft)
Output at 1,850 rpm and 6900 kPa (1,000 psi): 161.0 gal/min
Relief Valve Setting - Lift (Large Pump): 3289.0 psi
Relief Valve Setting - Tilt (Small Pump): 3560.0 psi

Hydraulic System - Ripper (Optional)

Cylinder, Double-acting: Lift, Bore and Stroke: 184 mm × 454 mm (0.60 ft × 1.5 ft)
Main Relief Pressure: 2800.0 psi
Output at 1,850 rpm and 6900 kPa (1,000 psi): 56.0 gal/min

Dimensions (Approximate)

Center Line of Front Axle to Hitch: 9.66 ft
Center Line of Rear Axle to Edge of Bumper: 13.76 ft
Ground Clearance: 27.0 in
Height to Top of Exhaust Pipe: 17.17 ft
Height to Top of Hood: 13.0 ft
Height to Top of ROPS: 18.34 ft
Length with Blade on Ground: 44.0 ft
Wheelbase: 19.3 ft
Center Line of Rear Axle to Edge of Ripper Mount: 13.8 ft
Departure Angle: 14.0 Degrees
Length with Blade and Ripper on Ground: 51.2 ft
Maximum Ripper Depth: 2.2 ft
Maximum Ripper Raise: 3.9 ft
Width Between Outside Tines: 10.2 ft
Width Between Tines: 5.1 ft

ELECTRICAL
- Alarm, back-up
- Alternator, (150-amp)
- Batteries, low maintenance
- Deutsch & Amp Seal terminal connectors
- ECM diagnostic connector
- Ground level electrical disconnect
- Ground level starting receptacle for emergency start
- Lighting system, halogen (front and rear)
- Lighting, access stairway
- Starter, electric (heavy duty)
- Starting and charging system (24-volt)
OPERATOR ENVIRONMENT
- Advisor display
- Air conditioner and heater with automatic temperature control
- Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 x 12V converters (24-volt, 10 amp) for use with laptop/cell phone
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift control system locks
- Heater and defroster
- Horn, electric
- Implement and steering lockouts
- VIMS 3G monitoring system: - Action alert system, three category - Instrumentation, Gauges: Engine coolant temperature Fuel Level Hydraulic Oil Temperature Tachometer Transmission Gear Indicator Transmission Oil Temperature
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
- Seat, Cat Comfort (cloth) air suspension
- STIC control system
- Tinted glass
- Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
POWER TRAIN
- Air-to-Air After cooler (ATAAC)
- Auto Idle Kickdown
- Axle oil coolers (front and rear)
- Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
- Case drain filters
- Delayed Engine Shutdown
- Demand fan
- Electric fuel priming pump
- Engine Cat C32 ACERT
- Ground level engine shutdown
- Ground level fast fill fuel
- Ground level transmission lockout
- Ground level starter lockout
- Idle Engine Shutdown
- Precleaner, engine air intake
- Next Generation Modular Radiator (NGMR)
- Starting aid (ether) automatic
- Throttle lock
- Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
- Venturi Exhaust Stacks
OTHER STANDARD EQUIPMENT
- Autolube
- Automatic bucket lift/tilt kickouts, electronically adjustable from cab
- Bumper service center
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Emergency platform egress
- Fenders, steel (front and rear)
- Grouped hydraulic pressure ports
- Guards, power train and crankcase
- Hitch, drawbar with pin
- Hoses, Cat XT and XT-ES
- Hydraulic oil cooler
- Impeller clutch
- Implement and steering ecology drains
- Mufflers, under hood
- Oil sampling valves
- Piston pump case drain filters
- Electro-hydraulic blade controls
- Product Link^™
- Service center with ground level electrical and fluids service center
- Sight gauges: - Coolant level - Implement oil level - Steering oil level - Transmission oil level
- Starter lockout, bumper
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
- Vandalism protection caplocks
- Windshield cleaning platforms
- Venturi Stack
TIRES, RIMS, AND WHEELS
- A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
ANTIFREEZE
- Premixed 50 percent concentration of extended life coolant with freeze protection to 34° C (-29° F)

BLADES
- Semi-U - 25.4 m3 (33.1 yd3)
- HD Semi-U - 25.4 m3 (33.1 yd3)
- Coal - 44.7 m3 (58.2 yd3)
ELECTRICAL
- 10A converter
- HID lights
- Object Detection
- Rear vision camera
- LED strobe warning beacons
OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Sirius/USB/Bluetooth Radio
- Sun Screen
STARTING AIDS
- Engine coolant 120V heater
- Engine coolant 240V heater
SPECIAL ARRANGEMENTS
- Ripper attachment (3 shank)
MACHINE CONTROL AND GUIDANCE
- CAES attachment ready option
MISCELLANEOUS ATTACHMENTS
- Arctic Antifreeze for protection to -50° C (-58° F)
- Diagnostic lines
- Roading fenders