569 SM/EHC Stationary Mount Knuckleboom Loader
Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.
- Technical Specs
- Standard Equipment
- Optional Equipment
- Maximum reach
- 36.0 ft
- Knuckleboom Length
- 32.5 ft
- Grapple Mounting Knuckle Length
- 9.0 in
- Swing Bearing Diameter
- 54.0 in
- Swing Bearing Gearing
- External
- Electric Motor
- 100.0 hp
- Electric Power Supply
- 460 Volt:60 Hz
- Operating Weight
- 18345.0 lb
- Gross Power
- 100.0 hp
- Cylinders - Live Heel
- 152 mm X 102 mm (6 in X 4 in)
- Cylinders - Main
- 152 mm X 102 mm (6 in X 4 in)
- Cylinders - Stick
- 178 mm X 102 mm (7 in X 4 in)
- Hydraulic Flow
- 170/204/61 L/min (45/54/16 gpm)
- Hydraulic Pressure - Swing
- 2500.0 psi
- Hydraulic Pressure - System
- 2500.0 psi
- Swing Speed
- 7.0 RPM
- Fuel Tank
- 125.0 gal
- Operating Weight
- 18545.0 lb
-
Motor Power Supply
- Electric Motor, 74 kW (100 HP) @ 1800 RPM
- 460 Volt (60 Hz) Electric Power Supply
- Four (4) Ring High Voltage Collector Ring
- Service Panel, NEMA 12 Enclosure
- Pump Drive, Direct Through Flex Coupling
- Across-the-line Magnetic Starting System
- Turntable Power Supply Mounting
-
Hydraulic System
- Three (3) In-Line Gear Pumps
- Radial Piston Swing Motor
- Continuous Rotation
- Electro Hydraulic (EHC) Controls
- Two Dual Element Return (3 mic)Filtration
- Filtration Bypass Indicators
- Diagnostic Nipples @ Pump for serviceability
-
Booms
- 9.9 m (32’6”) Knuckleboom
- 22.8 cm (9”) Grapple Mounting Knuckle
-
Structural
- Steel Mounting
- 575 Volt (60 Hz) Electric Power Supply
- Auxiliary Low Voltage Collector Ring
- Remote Skid Power Supply Mounting
- Non-Continuous Limited Rotation
- Oil Reservoir Heater
- 10.2 m (33’6”) Live Heel Boom
- 10.9 m (36') Knuckleboom
- 30.5 cm (12”) Grapple Mounting Knuckle
- Single “V” Heel
- Double “VV” Heel
- Concrete Mounting
- 30” Subframe Riser Mounting