MD6420C Rotary Blasthole Drill Autonomous Ready
- Technical Specs
- Standard Equipment
- Hole Diameter
- Up to 311 mm (Up to 12.25 in)
- Engine
- C32 ACERT
- Bit Load
- Up to 41 346 kg (Up to 91,152 lb)
- Altitude
- Up to 4572 m (Up to 15,000 ft)
- Maximum ambient rating (standard)
- 125 ° F
- Minimum ambient rating (standard)
- 30 ° F
- Note
- Optional cold weather packages available
- Retract rate
- 0-33.5 m/min (0-110 ft/min)
- Pull-down capacity
- Up to 383 kN (Up to 86,000 lbf)
- Hoist capacity
- Up to 311 kN (Up to 70,000 lbf)
- Drilling feed rate
- 0-33.5 m/min (0-110 ft/min)
- Head travel (16 m/50 ft mast)
- 720 in
- Head travel (13 m/40 ft mast)
- 600 in
- Head travel (10 m/35 ft mast)
- 480 in
- Cable type – 29 mm (1.125 in)
- DYFORM 8
- Bit load force
- Up to 41 346 kg (Up to 91,152 lb)
- Rotation speed
- 0-137 rpm
- Torque, dual motors
- 0-17 313 N∙m (0-12,769 lbf-ft)
- Climate control
- Roof-mounted, AC/heating/pressurizing unit
- Floor area
- 52.22 ft2
- Height inside
- 84.50 in
- Location
- To the right from the mast if facing rear deck from the rear end
- Number of doors
- Two (2) with windows (included in above)
- Number of windows
- 12
- Other
- Window wipers and washers
- Type
- Shock-mounted; two-man, integrated FOPS certified
- Windows (tinted safety glass laminated in rubber mounting)
- 0.56 in
- Brake release
- Automatic
- Brakes
- Spring set, hydraulic release
- Front
- Three-point oscillating type
- Maximum drive horsepower per track
- 290 hp
- Number of rollers on each side
- Total of 16: (13) lower rollers, (3) upper/carrier rollers
- Track adjustment means
- Hydraulic with grease gun
- Track drive disconnect
- Standard (manual)
- Tram speed maximum
- 1.41 mph
- Rock guards/chain guards
- Standard full-length guards
- Gradeability mast down – CDH (cab down hill)
- 25%
- Gradeability mast down – CUH (cab up hill)
- 13%
- Table height off ground
- 57 in
- Components
- Pipe loading guide roller
- Components
- Stationary rear deck
- Components
- Left rear swing gated handrail (dual gate design)
- Components
- Rear deck bit storage box with aluminum cover
- Components
- Hydraulically operated viewing hatch with LED hatch viewing spot light
- Lift capacity – each
- 114877 lbf
- Number
- 4
- Pad diameter – Non-drill end
- 30 in
- Pad diameter – Drill end
- 36 in
- Stroke on non-drill end
- 60 in
- Stroke on drill end
- 48 in
- Shock Sub (DTH Application)
- Thread – API reg. 140 mm (5.5 in)
- Top Adapter Sub
- Diameter depends on pipe diameter
- Top Adapter Sub
- Top thread – API reg. 140 mm (5.5 in)
- Top Adapter Sub
- Bottom thread – depends on pipe diameter
- Bit Sub (Rotary Application)
- Top thread – depends on pipe diameter
- Bit Sub (Rotary Application)
- Bottom thread – API reg. 168 mm (6.625 in)
- Bit Sub (Rotary Application)
- Table bushing roller-type or two-piece with replaceable liner
- Pipe Rack (Inside the Mast)
- Carousel with stationary pods and breaker plates
- 16 m Configuration
- 7.62 m (25 ft) × 2 as starter and four pieces of 7.62 m (25 ft) in carousel
- 16 m Configuration
- Outside diameter – 194 mm (75⁄8 in) or 219 mm (85⁄8 in)
- 13 m Configuration
- 12.19 m (40 ft) starter and five pieces of 12.19 m (40 ft) in carousel
- 13 m Configuration
- Outside diameter – 194 mm (75⁄8 in) or 219 mm (85⁄8 in)
- 10 m Configuration
- 10.66 m (35 ft) starter and five pieces of 10.66 m (35 ft) in carousel
- 10 m Configuration
- Outside diameter – 194 mm (75⁄8 in) or 219 mm (85⁄8 in)
- 10 m Configuration
- Length of drill – 10.67 m (35 ft)
- Winch System
- Rating – 3629 kg (8,000 lb) with 1588 kg (3,500 lb) lift capacity
- Winch System
- Cable size – 13 mm (0.5 in)
- Pipe Handling
- Sliding deck wrench
- Pipe Handling
- Fixed cable pipe catcher or optional hydraulic safety arm/pipe catcher with drill function interlock, when pipe catcher is not closed
- Pipe Handling
- Manually removable or optional hydraulically operated bit basket
- Pipe Handling
- Lifting bail-drill pipe/bit sub
- Discharge air flow (sea level)
- 2000 ft3/min
- Maximum operating pressure
- 100 psi
- Discharge air flow (sea level)
- 2600 ft3/min
- Maximum operating pressure
- 100 psi
- Hole diameter
- Up to 311 mm (Up to 12.25 in)
- 16 m/50 ft mast – Depth single pass
- 54 ft
- 16 m/50 ft mast – Multi-pass
- Up to 46.9 m (Up to 154 ft)
- 13 m/40 ft mast – Depth single pass
- 44 ft
- 13 m/40 ft mast – Multi-pass
- Up to 74.4 m (Up to 244 ft)
- 10 m/35 ft mast – Depth single pass
- 33.75 ft
- 10 m/35 ft mast – Multi-pass
- Up to 63.4 m (Up to 208 ft)
- Angle drilling
- 30° (in 5° increments)
- Discharge air flow (sea level)
- 1500 ft3/min
- Maximum operating pressure
- 10.3/24.1/34.4 bar (150/350/500 psi)
- Hi/low pressure switch, bit oil injection system
- 30 gal
- Jacks, mast pivot and deck
- Welded integrally to mainframe
- Machine deck
- Access both sides
- Model
- C32 ACERT
- Rated horsepower
- 912 hp
- Fuel tank
- 1514 L plus, 1703 L (400 gal plus, 450 gal)
- Emissions
- * The C32 ACERT engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards
- Model
- C32 ACERT
- Rated horsepower
- 1039 hp
- Fuel tank
- 1514 L plus, 1703 L (400 gal plus, 450 gal)
- Emissions
- * The C32 ACERT engine meets Tier 2/Stage II equivalent emission standards
- Manuals
- Operations/maintenance manuals and all schematics are stored in drill monitor
- Display
- English control system display text ex-factory. May be changed to other languages by dealer.
- Components
- Basic engine shut down timer
- Components
- Drill performance and monitoring/diagnostics system
- Components
- Electronic compressor control
- Electronic control:
- – Monitoring – Diagnostic system
- Components
- Filter indicators
- Components
- High/low tram speed select (high only when mast is down) interlock
- Components
- HMI touch screen control
- Components
- Mast lock indicator
- Components
- ECM (Electronic Control Module) provides fast and reliable control of all drill functions
- Components
- Pump drive gearbox temperature sensor
- Components
- Rotary head RPM gauge – digital
- Components
- Tram interlock, machine outside stability limits
- Components
- Tram interlock, pipe in hole
- Components
- Tram interlock, mast up and locked or down and parked
- Components
- Jack/tram interlock
- Components
- Cab environment control (AC, filter indicator, heat, fan speeds)
- Components
- Pipe positioner sensor
- Components
- Drill depth meter
- Components
- Drill function interlock, mast up and locked
- Components
- Rotary torque control
- Components
- Head clear interlock, rotary drive clear of carousel
- Components
- Winch interlock
- Components
- Jack pressure sensor
- Components
- Virtual rotary head travel stop
- Components
- Wiring for terrain interface provided
- Components
- Fuel tanks isolation valves
- Components
- Hydraulic tank with isolation valves and interlocks
- Components
- Slip resistant decks and walkways
- Components
- 3217 L (850 gal) fuel, (two tanks mounted under engine/compressor) with manual and remote fill
- Components
- Bolt-on hand rails with kick plates
- Components
- Cat® maintenance free batteries
- Components
- Stainless battery box, sliding drawer type
- Components
- Remote jump start terminals
- Components
- Tow hooks (front end)
- Components
- Lift lugs (for base machine minus mast)
- Components
- Walkways around the drill, 360 degrees
- Components
- Swing up steps, access/egress
- Components
- Self-closing gates
- Components
- Two stage mast raise cylinders
- Components
- Fixed dust curtains – four sides
-
POWER TRAIN
- Engine, Cat C32 ACERT, Tier 2/Stage II equivalent, 1,800 rpm
- Manifold covers, turbo and exhaust
- Engine fire frame
- Fire wall, engine and hydraulic drive
- Exhaust pipe blankets
-
MAST
- Hole diameter, up to 311 mm (121⁄4 in)
- Rated capacity, up to 383 kN (86,000 lbf)
- Pulldown/hoist system, single cylinder
- Rotary drive, dual motors
- 0-137 rpm, 0-17 313 N·m (0-12,769 lbf-ft) maximum torque
- Angle drilling, up to 30 degrees
- Mast locks and indicator in cab
- Auto cable tensioning system
- Hydraulic Operated Break-Out wrench (HOBO)
- Shear bolt deck wrench cover
- Dust hood with hinged quick change dust seal
- Remote thread lube system
- Mast lanyard mounting plates
-
OPERATOR ENVIRONMENT
- Cab, shock mounted, insulated
- Two-man extra-large FOPS
- Cat operator seat with air suspension
- Trainer’s seat
- Operator’s console: split with stainless steel panels
- Electric controls for drilling, tramming, leveling and auxiliary functions
- Dome lights, overhead interior
- Dash light
- Two (2) hinged doors, heavy duty latching
- Twelve (12) windows
- Full front drill window
- Roof window with protective cage
- Windshield wipers, washer tank kit
- Air conditioning/heating/pressurizing roof mounted, hydraulic driven
- Cab ladder, roof platform and railing
- Electric horn
- Slope indicators
- CD stereo kit with speakers
- 24V to 12V converter
- English control system display text may be changed to other languages
- Electronic Control Module (ECM)
- HMI touch screen control
- Drill performance monitoring and diagnostics system
- Drill depth meter
- Travel stop, virtual rotary head
- Jack/tram interlock
- Tram interlock, pipe in hole
- Tram interlock: mast up and locked or down and parked
- Mast lock indicator
- Tram speed select interlock: high only when mast is down
- Tram interlock: machine outside stability limits
- Drill function interlock mast up and locked
- Head clear interlock: rotary drive clear of carousel
- Winch interlock
- Pipe positioner sensor
- Jack pressure sensor
- Rotary head RPM gauge, digital
- Rotary torque control
- Electronic compressor control
- Filter indicators
- Pump drive gearbox temperature sensor
- Basic engine shut down timer
- Cab environment control: AC, filter indicator, heat, fan speeds
- Wiring for terrain interface
-
SAFETY AND SECURITY
- Air hose safety sleeves (whip socks)
- Hinged protective cage: for drill view window
- Battery and starter disconnects with lock-outs
- Eight (8) engine shut down buttons
- Tram alarm
- Strobe beacon on: – Cab and front left side of drill – Clearance light, mast crown
- Twenty (20) lights for night drilling
- Two (2) closed circuit cameras (front and left side) with monitor in cab
-
COOLING
- Shutdown switch, low coolant level
- Cooler fans, variable speed, ECM
-
FRAMES
- Four (4) leveling jacks: – Two (2) × 121.9 cm (48 in) rear – Two (2) × 152.4 cm (60 in) front
- Tow hooks, front end
- Lift lugs, for base machine without mast
- Mast raise cylinders, two stage
- Walkways, around the drill, 360 degrees
- Decks and walkways, slip resistant
- Hand rails, bolt-on with kick plates
- Swing up steps, access/egress
- Self-closing gates
- Stationary, rear deck
- Hydraulic viewing hatch with LED hatch viewing spot light
- Fixed dust curtains, four sides
- Rear deck bit storage box with aluminum cover
- Pipe loading guide roller
- Left rear swing gated handrail, dual gate
- Fuel tanks: – Two (2) tanks mounted below deck – 3217 L (850 gal) fuel – Manual and remote fill – Isolation valves
- Hydraulic tank with isolation valves and interlocks
- Cat maintenance free batteries
- Battery box, stainless, sliding drawer
- Cat remote jump start terminals
-
OTHER STANDARD EQUIPMENT
- Standard Caterpillar colors
- Foam injection connection
- Loop filters between hydraulic pumps and motors
- Return filters, hydraulic
- Auto lubrication system, centralized
- Feed traveling sheave lube provision
- Hydraulic pressure test points