D6T Track-Type Tractor
The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.
- Technical Specs
- Engine Model
- Cat C9.3 ACERTâ„¢
- Flywheel Power
- 215 hp
- Displacement
- 567 in3
- Net Power (Maximum) – 1,200 rpm: ISO 9249/SAE J1349
- 245 hp
- Emissions
- U.S. EPA Tier 4 Final
- Net Power (Rated) – 2,200 rpm: ISO 9249/SAE J1349
- 215 hp
- Note
- All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
- Note
- Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
- Build Number
- 19
- Fuel Tank
- 97.2 gal
- Cooling System
- 12.2 gal
- Engine Crankcase
- 6.5 gal
- Power Train
- 39.1 gal
- Final Drives (each)
- 3.6 gal
- Hydraulic Tank
- 16.5 gal
- Roller Frames (each)
- 6.6 gal
- Pivot Shaft Compartment
- 1.3 gal
- DEF Tank
- 4.5 gal
- Operating Weight
- 47138 lb
- XL A
- 47846 lb
- XL SU
- 47138 lb
- XL VPAT
- 53042 lb
- XW A
- 49797 lb
- XW SU
- 48909 lb
- XW VPAT
- 54045 lb
- LGP S
- 51385 lb
- LGP A
- 53829 lb
- LGP VPAT
- 54526 lb
- Note
- Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
- XL SU-Blade
- 7.26 yd3
- XL A-Blade
- 5.17 yd3
- XL VPAT-Blade
- 6.07 yd3
- XW SU-Blade
- 7.38 yd3
- XW A-Blade
- 5.69 yd3
- XW VPAT-Blade
- 6.57 yd3
- LGP S-Blade
- 4.96 yd3
- LGP A-Blade
- 6.46 yd3
- LGP VPAT-Blade
- 6.57 yd3
- Width of Tractor Without Trunnions (standard track)
- 8.00 ft
- Machine Height to Product Link Antenna(1)
- 10.67 ft
- Length of Track on Ground
- 9.25 ft
- Length of Basic Tractor(2)
- 13.83 ft
- Ground Clearance
- 15 in
- Ground Pressure (ISO 16754)(3)
- 8.66 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
- Width of Tractor Without Trunnions (standard track)
- 9.17 ft
- Machine Height to Product Link Antenna(1)
- 10.67 ft
- Length of Track on Ground
- 9.25 ft
- Length of Basic Tractor(2)
- 13.83 ft
- Ground Clearance
- 15 in
- Ground Pressure (ISO 16754)(3)
- 6.64 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
- Width of Tractor Without Trunnions (standard track)
- 10.50 ft
- Machine Height to Product Link Antenna(1)
- 10.83 ft
- Length of Track on Ground
- 10.67 ft
- Length of Basic Tractor(2)
- 14.50 ft
- Ground Clearance
- 16 in
- Ground Pressure (ISO 16754)(3)
- 5.11 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
- Width of Tractor Without Trunnions (standard track)
- 8.92 ft
- Machine Height to Product Link Antenna(1)
- 10.67 ft
- Length of Track on Ground
- 9.25 ft
- Length of Basic Tractor(2)
- 16.08 ft
- Ground Clearance
- 15 in
- Ground Pressure (ISO 16754)(3)
- 9.78 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
- XL SU-Blade
- 10.7 ft
- XL A-Blade
- 13.7 ft
- XL VPAT-Blade
- 12.7 ft
- XW SU-Blade
- 11.7 ft
- XW A-Blade
- 14.8 ft
- XW VPAT-Blade
- 13.7 ft
- LGP S-Blade
- 13.3 ft
- LGP A-Blade
- 16.6 ft
- LGP VPAT-Blade
- 13.7 ft
- Width of Tractor Without Trunnions (standard track)
- 9.83 ft
- Machine Height to Product Link Antenna(1)
- 10.83 ft
- Length of Track on Ground
- 10.67 ft
- Length of Basic Tractor(2)
- 16.42 ft
- Ground Clearance
- 16 in
- Ground Pressure (ISO 16754)(3)
- 6.92 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
- Width of Tractor Without Trunnions (standard track)
- 10.33 ft
- Machine Height to Product Link Antenna(1)
- 10.83 ft
- Length of Track on Ground
- 10.67 ft
- Length of Basic Tractor(2)
- 16.42 ft
- Ground Clearance
- 16 in
- Ground Pressure (ISO 16754)(3)
- 6.28 psi
- Note
- (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
- Note
- (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
- Note
- (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.