816F Series 2 Landfill Compactor
One World, One Machine. The Cat® 816F Series 2 Landfill Compactor offers…Exceptional trash protection, Greater productivity, Excellent machine stability and operator comfort, while meeting worldwide U.S. Environmental Protection Agency Tier 3 emissions regulations and Stage IIIA EU Emissions Directive 97/68/EC. Combine all this with the finest customer support system in the world through the Caterpillar dealer network and you get the lowest operating costs with the best up-time in the industry.
- Technical Specs
- Standard Equipment
- Gross Power
- 253.0 hp
- Net Power
- 232.0 hp
- Engine Model
- Cat® C9 ACERT™
- Net Power ISO 3046-2
- 232.0 hp
- Net Power ISO 9249
- 235.0 hp
- SAE J1349
- 232.0 hp
- EEC 80/1269
- 235.0 hp
- Torque Rise
- 19.0 %
- Bore
- 4.4 in
- Stroke
- 5.9 in
- Displacement
- 537.0 in3
- Forward 1
- 3.5 mph
- Forward 2
- 5.9 mph
- Reverse 1
- 4.0 mph
- Reverse 2
- 6.6 mph
- Vane Pump Output at 2015 rpm and 6900 kPa (1000 psi)
- 29.6 gal/min
- Relief Valve Setting
- 2248.0 psi
- Lift Cylinder Bore x Stroke
- 120.65 mm x 913.9 mm 4.75 in x 36 in
- Front
- Fixed
- Oscillating Rear
- ±8°
- Standards
- Meet OSHA regulations
- Drum Width
- 3.33 ft
- Drum Diameter
- 4.25 ft
- Tips per Wheel
- 20
- Drum Width
- 3.33 ft
- Drum Diameter
- 4.25 ft
- Blades per Wheel
- 20
- Width Over End Bits
- 11.9 ft
- Moldboard Length
- 11.67 ft
- Height
- 6.27 ft
- Fuel Tank
- 117.8 gal
- Cooling System
- 14.5 gal
- Crankcase
- 9.0 gal
- Transmission
- 13.2 gal
- Differentials and Final Drives - Front
- 11.4 gal
- Differentials and Final Drives - Rear
- 11.4 gal
- Hydraulic System (including Tank)
- 36.2 gal
- Hydraulic Tank
- 23.2 gal
- Operating Weight
- 52364.0 lb
- ROPS/FOPS
- Meet SAE and ISO standards
- Standards
- Meet required sound standards
- Ground Clearance
- 1.5 ft
- Height to Top of Cab with A/C
- 12.75 ft
- Height to Top of Exhaust Pipe
- 11.36 ft
- Height to Top of Hood
- 8.16 ft
- Ground Clearance to Bumper
- 2.64 ft
- Ground Clearance to Striker Bars
- 2.13 ft
- Center Line of Rear Axle to Edge of Bumper
- 6.22 ft
- Center Line of Rear Axle to Hitch
- 5.5 ft
- Wheelbase
- 10.9 ft
- Length with Blade on Ground
- 25.76 ft
- Width over Wheels
- 10.95 ft
- Width over Endbits (Blade)
- 11.99 ft
- Turning Radius - Outside End Bits
- 21.21 ft
- Blade Width Straight
- 11.67 ft
- Drum Width
- 3.33 ft
- Ground Clearance
- 1.49 ft
-
ELECTRICAL
- Alarm, backup
- Alternator (80 amp)
- Batteries, maintenance-free (2)
- Diagnostic connectors
- Lighting system, halogen (front, rear and cab-mounted)
- Starting and charging system (24-volt)
- Starting receptacle for emergency starts
-
GUARDS
- Axle (front and rear)
- Drive shaft
- Hinged crankcase
- Hydraulic tank
- Power train
- Steering cylinder
-
OPERATOR ENVIRONMENT
- Air conditioner, roof-mounted
- Blade control system locks
- Array
- Coat hook
- Cigar lighter and ashtray
- Array
- Dome light (cab)
- Fuses, blade style (in-cab)
- Heater and defroster
- Horn, electric (steering wheel mounted)
- Hydraulic steering
- Lunchbox and beverage holders
- Mirrors, rearview (internally-mounted)
- Seat, KAB mechanical suspension
- Seat belt, retractable, 76 mm (3 in) wide
- Array
-
POWER TRAIN
- Array
- Array
- Engine cooling fan (suction)
- Fuel priming pump (electric)
- Muffler
- Radiator, Next Generation Modular (NGMR)
- Starting aid (ether)
- Torque converter
- Array
-
OTHER STANDARD EQUIPMENT
- Cat O-ring face seals/couplings
- XT™ hoses
- Array
- Hitch, drawbar with pin
- Hood, metallic with lockable service doors
- Hydraulic oil cooler
- Oil sampling valves
- Striker bars (all wheels)
- Vandalism protection caplocks
- Wheels (1016 mm/40 in) with weld-on Plus Tips with extended inner rim
-
BULLDOZER
- Bulldozer blade, hydraulics and linkage are not included in standard equipment
-
ANTIFREEZE
- Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)