416F2 Backhoe Loader

416F2 Backhoe Loader

Download the Product Brochure
Continue Browsing

Experience the new Cat 416F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.


Net Power – SAE J1349
87 hp
4.13 in
5 in
268 in3
Engine Model
Cat® C4.4 ACERT™
Gross Power – SAE J1995
95 hp
Gross Power – ISO 14396
94 hp
Rated Net Power @ 2,200 rpm – SAE J1349
87 hp
Rated Net Power @ 2,200 rpm – ISO 9249
88 hp
Rated Net Power @ 2,200 rpm – EEC 80/1269
88 hp
Net Peak Power @ 1,800 rpm – SAE J1349
106 hp
Net Peak Power @ 1,800 rpm – ISO 9249
107 hp
Net Peak Power @ 1,800 rpm – EEC 80/1269
107 hp
Net Torque Rise @ 1,400 rpm – SAE J1349
Engine meets U.S. EPA Tier 4 Final emission standards.
Net Peak Torque @ 1,400 rpm
323 lbf-ft
Rated Net Power – SAE J1349
87 hp
Rated Net Power – ISO 9249
88 hp


Operating Weight – Maximum
24251 lb
359 lb
Four Wheel Drive
392 lb
Air Conditioning
101 lb
Counterweights (Option 1)
255 lb
Operating Weight – Minimum
15904 lb
Operating Weight – Maximum (ROPS Capacity)
24251 lb
MP Bucket (0.96 m3/1.25 yd3) (no forks or teeth)
1642 lb
Extendible Stick
659 lb
Counterweights (Option 2)
530 lb
Counterweights (Option 3)
1015 lb


Dig Depth – Standard
14.3 ft
Dig Depth – E-Stick Extended
17.9 ft

Hydraulic System

Pump Type
Variable Flow, Axial Piston
Closed Center
Pump Capacity @ 2,200 rpm
35 gal/min
System Pressure – Backhoe
3336 psi
System Pressure – Loader
3336 psi


Power Shuttle Transmission – Standard: Forward – 1st
3.4 mph
Power Shuttle Transmission – Standard: Forward – 2nd
5.5 mph
Power Shuttle Transmission – Standard: Forward – 3rd
12 mph
Power Shuttle Transmission – Standard: Forward – 4th
23 mph
Power Shuttle Transmission – Standard: Reverse – 1st
3.4 mph
Power Shuttle Transmission – Standard: Reverse – 2nd
5.5 mph
Power Shuttle Transmission – Standard: Reverse – 3rd
12 mph
Power Shuttle Transmission – Standard: Reverse – 4th
23 mph

Service Refill Capacities

Cooling System with Air Conditioning
5.8 gal
Fuel Tank
42 gal
Diesel Exhaust Fluid (DEF)*
5 gal
Engine Oil with Filter
2.3 gal
Transmission – Power Shuttle: 2WD
4 gal
Transmission – Power Shuttle: 4WD
4 gal
Rear Axle
4.4 gal
Rear Axle – Planetaries
0.4 gal
Front Axle (4WD)
2.9 gal
Front Axle (4WD) – Planetaries
0.2 gal
Hydraulic System
23.8 gal
Hydraulic Tank
10.6 gal
Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
* Must meet the requirements outlined in ISO 22241.

Axle Ratings

Front Axle, 2WD – Static
50582 lb
Front Axle, 2WD – Dynamic
20233 lb
Front Axle, 4WD – Static
50582 lb
Front Axle, 4WD – Dynamic
20233 lb
Rear Axle – Static
50582 lb
Rear Axle – Dynamic
20233 lb


Front Wheel
Power Steering
2.6 in
4.7 in
Rod Diameter
1.4 in
Axle Oscillation
Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Front Wheels
26.8 ft
Turning Circle – 2WD/4WD (inner wheel not braked): Outside, Widest Loading Bucket
36.0 ft


Choice 1
Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2
Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
Choice 3
Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
Choice 4
Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU


Cab – ROPS
SAE J1040 MAY94; ISO 3741 1994
Cab – FOPS
SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab – Sound
ANSI/SAE J1166 OCT98 is 79 dB(A)
SAE J/ISO 3450; ISO 3450 1996
Exterior Sound
SAE J188 JUN86 is 76 dB(A)

Engine Features

Regeneration is passive and does not require any input from the operator or disrupt work.
Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
For durability, inlet valves are nitrided, martensitic chrome silicon steel.
For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Direct injection fuel system provides accurate fuel delivery and efficiency.
Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Standard glow plug starting aid system for efficient cold weather starting.
High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Higher low end torque for better engine/machine performance.
Engine is equipped with electric fuel priming pump.


Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Self-adjusting, completely enclosed and sealed.
Foot operated brake pedals can be interlocked for roading.
Parking/secondary brakes are independent of the service brake system.
Parking brake is mechanically applied through an adjustable hand lever located on the right console.
  • Air cleaner
  • Alarm, back-up
  • Alternator, 150 amp
  • Audible system fault alarm
  • Backhoe controls, mechanical two lever
  • Battery, maintenance-free, 880 CCA
  • Battery disconnect switch
  • Battery remote jumpstart
  • Boom transport lock
  • Brace, lift cylinder
  • Brake, secondary parking
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Bucket level indicator
  • Canopy, ROPS/FOPS
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Counterweight, bumper
  • Dome light (cab only)
  • Diagnostic port for engine
  • Differential lock, loader joystick
  • Drink holders, two
  • Engine, Cat C4.4 ACERT (Direct Injection Turbocharged), meets U.S. EPA Tier 4 Final emission standards, selective catalyst reduction, diesel oxidation catalyst (DOC)
  • Engine enclosure, sound suppression removal panels
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, spin-on: fuel, engine oil, transmission oil, water separator
  • Filters, bowl and cartridge: hydraulic fluid
  • Flashing hazards/signal lights
  • Floor mat
  • Fully hinged front grill for cooling package cleaning access
  • Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
  • Ground level fuel fill and DEF fill
  • High ambient cooling package
  • Hood lock, inside cab
  • Hydraulic hose, XT
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valve, hydrostatic steering
  • Hydraulic valves, loader 2 function
  • Hydraulic valves, backhoe 4 function
  • Hydraulics, load sensing with variable displacement piston pump
  • Indicator lights: Eco mode active, water in fuel, remote dial throttle active, engine warning, warning lamp, emissions module malfunction, AESC active, low battery/charging system warning, high hydraulic oil temperature; LCD warnings: engine oil pressure, machine locked (if equipped), service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
  • Instrument panel lights
  • Key start/stop system
  • LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info
  • Lights, working (2 front, 2 rear)
  • Loader, self-leveling, return-to-dig and transmission disconnect switch
  • Loader, single tilt
  • Mechanical two lever controls
  • Mirror, rearview
  • Open circuit breather
  • Power receptacle, 12 volt, 2 internal, 1 external
  • Power steering, hydrostatic
  • Seat belt, retractable, 51 mm (2 in)
  • Socket, two roof
  • Stabilizer shoes, street
  • Steering knob
  • Seat, air suspension, fabric or vinyl cover, with armrest
  • Starting system, glow plugs
  • Steering, hydrostatic
  • Storage compartment, lockable
  • Storage tray
  • Stop and tail lights
  • Swing transport lock
  • Tilt steering column
  • Tires
  • Toolbox, external, lockable
  • Torque converter
  • Throttle, hand and foot, electronic
  • Transmission, four speed, syncromesh
  • Transmission neutralizer switch
  • Transport tie-downs
  • Two Wheel Drive
  • Vandalism locks
  • Warning horn, electric
  • Backhoe controls, pilot joysticks
  • Battery, additional, 880 CCA
  • Cab, standard
  • Cold weather fuel (–30° C/–22° F)
  • Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
  • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
  • Fenders, front with integral steps
  • Four Wheel Drive
  • Guard, boom protection plate
  • Guard, stabilizer, rock
  • Hydraulic valves, loader (3rd valve for GP, MP or Quick Coupler)
  • Hydraulic valves, backhoe (5th and 6th function)
  • Hydraulic lines, combined function auxiliary
  • Product Link, satellite, PL631E
  • Product Link, cellular, PL641I
  • Quick Coupler, hydraulic, dual lock
  • Quick Coupler, manual, dual lock
  • Quick Coupler, pin lock
  • Radio and CD player
  • Radio and CD player, Bluetooth
  • Ride Control
  • Rotating beacon, magnetic mount
  • Seat belt, 75 mm (3 in)
  • Security system keypad
  • Stabilizer pads, grouser type
  • Stabilizer pads, reversible
  • Stick, extendible
  • Storage box
  • Vandalism protection, gauge cover
  • Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.