AD45B Underground Articulated Truck
The AD45B underground articulated truck is designed for high production, low cost-per-ton hauling in underground mining applications. Rugged construction and simplified maintenance guarantee long life with low operating costs. Engineered for performance, designed for comfort, built to last.
- Technical Specs
- Standard Equipment
- Optional Equipment
- Engine Model
- Cat® C18 ACERT™
- Rated Power
- 1800 rpm
- Gross Power - SAE J1995
- 587 hp
- Net Power – 80/1269/EEC
- 555.0 hp
- Gross Power - VR Engine - SAE J1995
- 587 hp
- Gross Power - Tier 3 Engine - SAE J1995
- 547 hp
- Bore
- 5.7 in
- Stroke
- 7.2 in
- Displacement
- 1104.53 in3
- Gross Machine Mass
- 187393 lb
- Nominal Payload Capacity
- 99208.0 lb
- Body Capacities
- 18.0-25.1 m3 (23.5-32.8 yd3)
- Empty
- 88184.0 lb
- Loaded
- 187393.0 lb
- Empty - Front Axle
- 60847.0 lb
- Empty - Rear Axle
- 27337.0 lb
- Loaded - Front Axle
- 85451.0 lb
- Loaded - Rear Axle
- 101942.0 lb
- Empty - Front Axle
- 69%
- Empty - Rear Axle
- 31%
- Loaded - Front Axle
- 45.6%
- Loaded - Rear Axle
- 54.4%
- Forward 1
- 4.9 mph
- Forward 2
- 6.8 mph
- Forward 3
- 9.4 mph
- Forward 4
- 12.8 mph
- Forward 5
- 17.4 mph
- Forward 6
- 23.7 mph
- Forward 7
- 32.3 mph
- Reverse 1
- 4.6 mph
- Reverse 2
- 6.3 mph
- Differential Ratio
- 3.46:1
- Final Drive Ratio
- 5.65:1
- Total Reduction Ratio
- 19.55:1
- Raise
- 16.0 Seconds
- Lower
- 21.0 Seconds
- Total Cycle Time
- 37.0 Seconds
- Ejector Body
- 29.9 yd3
- Dump Body 1
- 23.6 yd3
- Dump Body 2 (Standard Body)
- 27.9 yd3
- Dump Body 3
- 32.8 yd3
- Articulation Angle
- 42.5º
- Frame Oscillation
- 10º
- Inside Clearance Radius*
- 209.0 in
- Outside Clearance Radius*
- 365.8 in
- Note
- *Clearance dimensions are for reference only.
- Engine Crankcase with Filter
- 16.9 gal
- Transmission
- 15.9 gal
- Hydraulic Tank
- 70.3 gal
- Cooling System
- 22.5 gal
- Front Differentials and Final Drives
- 20.3 gal
- Rear Differentials and Final Drives
- 21.9 gal
- Fuel Tank
- 201.8 gal
- Tire Size
- 29.5 × R29
- Brakes
- ISO 3450, AS2958.1, CAN-CSA424.30-M90
- Cab/FOPS
- ISO 3449, SAE J231, AS2294.3, EN13627
- Cab/ROPS
- ISO 3471, SAE J1040, AS2294.2, EN13510
-
ELECTRICAL
- 12V power supply in cab
- Alternator, 95-amp
- Auxiliary start receptacle
- Battery disconnect switch, ground level
- Circuit breaker, 80-amp
- Corrosive protection spray
- Diagnostic connector
- Electric starting, 24V
- Engine shutdown switch, ground level: – Front left hand side
- Lighting: – Brake and tail light, LED – Headlights with dimmer switch, halogen – Rear work light (cab mounted), halogen – Reversing lights, halogen
- Low maintenance batteries
- Reversing alarm
- Starting and charging system
-
OPERATOR ENVIRONMENT
- Cat Electronic Monitoring System (Cat EMS)
- Electric horns
- Gauges: – Engine coolant temperature – Transmission coolant temperature – Hydraulic oil temperature – Fuel level – Speedometer – Tachometer
- Indicator lights: – Alert warning light – Body up position warning – High beam – Residual brake pressure warning – Retarder application – Turn signal
- Low hydraulic level warning
- Open operator station ROPS/FOPS structure
- Operator presence system (auto park brake)
- Rearview mirrors
- Suspension seat Cat Comfort TLV2 with retractable seat belt
- Trainer/passenger seat and seat belt
- Tilt/telescopic steering wheel
- Turn signal indicators
-
POWER TRAIN
- Cat C18 ATAAC diesel engine, 6-cylinder
- Automatic brake retarder control
- Auto shift transmission 7 speed forward/2 speed reverse
- Control throttle shifting
- Engine air intake precleaner
- Electric fuel priming pump
- Exhaust, turbo compartment shielding
- Four wheel drive
- Long life coolant
- Programmable ground speed limiting
- Programmable gear block out with tray up
- Radiator cap manual release
- Radiator, cross flow
- SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
- Torque converter, standard with automatic lockup
-
OTHER STANDARD EQUIPMENT
- Body, dump, (21.3 m3, 27.9 yd3)
- Catalytic exhaust purifier/muffler group
- Centralized lubrication points
- Decals, international picto graphics
- Dual fuel tanks
- Engine and transmission belly guards
- Fenders, front, rear flaps
- Fire wall
- Fuel system manual shut off tap
- Front axle suspension
- Frame lifting lugs
- Front and rear tow pin
- Front rubber bumpers
- Hand hold (access on/off top deck)
- Hitch, articulated and oscillated
- Operator and Maintenance Manual, English
- S·O·S port: – Coolant – Engine oil – Hydraulic oil – Transmission oil
- Swing out radiator grill
- Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
-
Battery shutdown
- Ground level isolation, in cab isolation switch
- Ground level isolation, engine shutdown switch
- Ground level isolation, in cab isolation, engine shutdown switch
-
Body dump
- Body, (18.0 m3, 23.5 yd3)
- Body, (25.1 m3, 32.8 yd3)
-
Body ejector
- Ejector, (22.9 m3, 30.0 yd3)
-
Body liners, impact and/or wear
- 10 mm (0.4"), body, dump (18.0 m3, 23.5 yd3)
- 10 mm (0.4"), body, dump (21.3 m3, 27.9 yd3)
- 10 mm (0.4"), body, dump (25.1 m3, 32.8 yd3)
- 10 mm (0.4"), body, ejector, (22.9 m3, 30.0 yd3)
-
Body wear plate, external
- 16 mm (0.62"), body, dump (18.0 m3, 23.5 yd3)
- 16 mm (0.62"), body, dump (21.3 m3, 27.9 yd3)
- 16 mm (0.62"), body, dump (25.1 m3, 32.8 yd3)
- Brake pressure gauges
- Camera, color rear facing
- Cover, anti vandalism for shipping
-
Engine options
- Diesel particulate filter (for use with VR engine only)
- Engine, Ventilation Reduction (VR)
- Tier 3
-
Fast fill system
- Coolant
- Engine oil
- Fuel (dual tanks)
- Hydraulic oil
- Transmission oil
-
Fire suppression system
- Ansul, dry powder
- Foam, water based
-
Fluids
- Arctic fuel
- Arctic coolant
-
Lighting
- Headlights with dimmer switch, LED
- Rear work light (cab mounted), LED
- Reversing lights, LED
-
Lubrication system
- Automatic, dump or ejector body
- Centralized, ejector body
-
Mine transfer
- Mine transfer ready front frame (tack welded)
- Mine transfer ready dump body (tack welded)
- Mine transfer ready ejector body (tack welded)
-
Operators station ROPS/FOPS enclosed
- Air conditioning
- Cab pressurizer and filter
- Dome light
- Heater
- Radio ready compartment for radio and speakers
- Sun visor
- Window, sliding cab door
-
Operator and Maintenance Manual
- Chinese
- Indonesian
- French
- Portuguese
- Russian
- Spanish
-
Park brake switch engagement
- Push to apply
- Pull to apply
-
Payload
- Truck Payload Measurement System (TPMS)
- Remote display for TPMS
- Reflective tape
-
Rims
- Rim identification numbering
- Spare, tubeless
-
Seat
- Suspension seat Cat Comfort TLV2, vinyl
- Suspension seat tee, mechanical
-
Seat cover
- Tee and Cat Comfort TLV2
- Seat cover, companion
- Secondary steering system
-
Service tools
- Collet jacking bolts, dump or ejector
- Diagnostics box
- Hoist cylinder supports (for body removal)
- Brake wear gauge
- Reference parts manual for additional tooling available
-
Switches
- Engine shutdown, fire suppression activation
- Idle timer
- Engine shutdown, fire suppression activation/idle timer
-
Technology
- Vital Information Management System (VIMS) Gen 3
-
Tire arrangements
- Tire, 29.5 × R29 VSNT Bridgestone
- Tire, 29.5 × R29 VSDL Bridgestone
- Torque converter, high altitude, 3000 m (9,842 ft) and up
- NOTE: Not all features are available in all regions. See your Cat dealer for more information.