963K Track Loader

963K Track Loader

Download the Product Brochure
Continue Browsing

Save money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you reduced ground pressure and better traction so you can start the job earlier and work longer in soft underfoot conditions. Purpose-built Waste Handler, Ship Hold and Partial Steel Mill configurations stand up to the toughest applications. This new generation of Cat® Track Loaders brings you all of this, plus improved performance and fuel efficiency.
For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.

Engine

Flywheel Power
193 hp
Engine Model
Cat C7.1 ACERT
Bore
4.13 in
Stroke
5.31 in
Displacement
427.8 in3
Engine Power (Maximum) – ISO 14396
221 hp
Engine Power (Maximum) – ISO 14396 (DIN)
224 hp
Net Power – ISO 9249/SAE J1349
193 hp
Net Power – ISO 9249/SAE J1349 (DIN)
196 hp
Emissions
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Note
Engine power ratings occur at 1,800 rpm.
Note
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D74
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Undercarriage

Track on Ground
100 in
Track Gauge
72.8 in
Track Shoe Width – Standard
22 in
Track Shoe Width – Optional
18 in
Track Rollers/Shoes – Each Side
7/38
Ground Contact Area – Standard Shoe
4900 in2
Ground Contact Area – Optional Shoe
4013 in2
Ground Pressure(1) – Standard Shoe
9.1 psi
Ground Pressure(1) – Optional Shoe
11.1 psi
Ground Pressure – Standard Shoe
9.0 psi
Ground Pressure – Optional Shoe
11 psi
Grouser Height – Double Grouser
1.65 in
Track Shoe Width – Wide Gauge
31.5 in
Ground Contact Area – Wide Gauge*
7136 in2
Ground Pressure – Wide Gauge*
7.0 psi
Track Gauge – Wide Gauge
82.7 in
Link Pitch
8.0 in
Note
* ISO 16754:2008
Note
Ground pressure is calculated using operating weight of machine with General Purpose bucket.
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Drive System

Track Motor
Two, variable displacement, bent axis motors
Drive Pump
Two, variable displacement, slipper-type axial piston pumps
Track Motor
Two, variable displacement, bent axis motors
Relief Valve Setting
6890 psi
Drive System
Hydrostatic drive with infinite machine speeds to 10.0 km/h (6.2 mph)

Hydraulic System – Equipment

Type
Closed center, load sensing piston
Output
60.8 gal/min
Main Relief Valve Setting
3989 psi

Service Refill Capacities

Fuel Tank
84.5 gal
Cooling System
8.45 gal
Final Drives (each)
4 gal
Hydraulic Tank
23.7 gal
Pivot Shaft
0.5 gal
Crankcase (with filter)
4.4 gal
DEF Tank(1)
4.22 gal
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Weights

Operating Weight
44138 lb
Operating Weight(1)
44771 lb
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Note
Operating Weight Wide Gauge: Includes coolant, lubricants, 100% fuel tank, Wide Flush bucket, heavy counterweight light + additional, 75 kg (165 lb) operator.

Buckets

Capacity – General Purpose
3.2 yd3
Capacity – Performance Series
3.7 yd3
Capacity – Multi-Purpose
2.6 yd3
Width – General Purpose
102.8 in
Width – Performance Series
106.8 in
Width – Multi-Purpose
101.3 in
Capacity – High Retention
3.7 yd3
Capacity – Wide Flush
3.8 yd3
Bucket Width – Wide Flush
118.1 in

Ripper Specifications

Type
Radial
Number of Pockets
3
Overall Width/Beam
76.7 in
Ground Clearance
23.4 in
Penetration
11.6 in
Ripping Width
72.3 in
Shank Cross Section
58.5 mm × 138 mm (50 in × 5.4 in)
Cylinders – Bore
4.5 in
Cylinders – Stroke
11.3 in
Added Machine Length with Ripper in Transport Position
24.0 in

Standards

Brakes
Brakes meet the standard ISO 10265:2008.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
Cab – Declared Dynamic Operator Sound Pressure Level
The declared dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at the maximum engine cooling fan speed. The sound level may vary at different engine c
Cab – Hearing Protection
Hearing protection is recommended when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment.
Cab – Declared Exterior Sound Power Level
The declared exterior sound power level is 108 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008”. The measurement was conducted at the maximum engine cooling fan speed. T
Cab – Labeled Sound Power Level
The labeled sound power level is 111 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC.

Bucket Cycle Times

Lift
5.5 seconds
Power Down
3.7 seconds
Float Down
2.0 seconds
Dump at Maximum Height (from full rackback)
1.3 seconds
Rackback at Maximum Height (from full dump)
1.4 seconds

Dimensions

Overall Machine Width/Without Bucket/Standard Tracks – 550 mm (21.6 in) Shoes
94.5 in
Ground Clearance
18.5 in
Machine Height to Top of Cab
130.9 in
Overall Machine Length*
275.6 in
Carry Position Approach Angle
15°
Digging Depth*
5.4 in
Maximum Rollback at Ground/Carry Position
43°/50°
Bucket Height in Carry Position
18 in
Reach at Full Lift Height and 45° Dump*
54 in
Clearance at Full Lift Height and 45° Dump*
114.8 in
Maximum Rollback/Dump, Fully Raised
52°/53°
Grading Angle
63°
Height to Bucket Hinge Pin
155.1 in
Overall Machine Height, Bucket Fully Raised
212.7 in
Height to Top of Stack
115.7 in
Ramp Angle
29°
Note
*With General Purpose bucket and extra duty teeth.

Dimensions (Approximate)

Overall Machine Width without Bucket: With Narrow Tracks – 450 mm (17.7 in) Shoes
90.5 in
Length to Front of Track
194.6 in
Maximum Rollback at Carry Position
50°
Maximum Dump, Fully Raised
53°
Height to Top of Seat with Headrest
110.6 in
Overall Machine Width without Bucket: With Wide Gauge Tracks – 800 mm (31.5 in) Shoes
114.2 in
Note
Dimensions vary with bucket. Refer to Operating Specifications chart.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.