980M Wheel Loader - Puckett Rents

The new 980M Wheel Loader has an ACERT™ engine equipped with a combination of proven electronic, fuel, and air components. Applying proven technologies systematically and strategically lets us meet your high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance. Aggregate Handler and other optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)

Engine

Net Power - ISO 9249: 373 hp
Engine Model: Cat C13 ACERT
Displacement: 763 in³
Max Gross Power @ 1,800 rpm – SAE J1995: 412 hp
Max Gross Power @ 1,800 rpm – SAE J1995 (metric): 417 hp
Max Power @ 1,800 rpm – ISO 14396: 406 hp
Max Power @ 1,800 rpm – ISO 14396 (metric): 412 hp
Max Net Power @ 1,800 rpm – SAE J1349: 373 hp
Max Net Power @ 1,800 rpm – SAE J1349 (metric): 378 hp
Max Net Power @ 1,800 rpm – ISO 9249: 373 hp
Max Net Power @ 1,800 rpm – ISO 9249 (metric): 378 hp
Peak Gross Torque (1,300 rpm) – SAE J1995: 1617 lbf-ft
Peak Gross Torque (1,300 rpm) – ISO 14396: 1602 lbf-ft
Maximum Net Torque (1,100 rpm): 1505 lbf-ft

Weights

Operating Weight: 66337 lb
Note: Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7.

Buckets

Bucket Capacities: 4.2-12.2 m³ (5.25-16.0 yd³)

Operating Specifications

Breakout Force: 50357 lbf
Static Tipping Load – Full 40° Turn – with Tire Deflection: 43133 lb
Static Tipping Load – Full 40° Turn – No Tire Deflection: 45847 lb
Note: For a machine configuration as defined under “Weight.”
Note: Full compliance to ISO 143971:2007 Sections 1 thru 6.

Transmission

Forward 1: 4.3 mph
Forward 2: 8.3 mph
Forward 3: 14.6 mph
Forward 4: 24.5 mph
Reverse 1: 4.8 mph
Reverse 2: 9.4 mph
Reverse 3: 16.7 mph
Reverse 4: 24.5 mph
Note: Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.

Hydraulic System

Implement System: Maximum Pump Output (2,250 rpm): 119 gal/min
Implement System: Maximum Operating Pressure: 4975 psi
Hydraulic Cycle Time – Total: 10.1 Seconds

Service Refill Capacities

Cooling System: 12 gal
Crankcase: 9.8 gal
Transmission: 20.3 gal
Differentials and Final Drives – Front: 22 gal
Differentials and Final Drives – Rear: 22 gal
Hydraulic Tank: 40 gal
Fuel Tank: 112.5 gal

Sound

With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008): 112 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013): 78 dB(A)*
Note: *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008): 75 dB(A)

Dimensions – Standard Lift

Height to Top of Hood: 10.25 ft
Height to Top of Exhaust Pipe: 12.33 ft
Height to Top of ROPS: 12.58 ft
Ground Clearance: 1.42 ft
Center Line of Rear Axle to Edge of Counterweight: 8.17 ft
Center Line of Rear Axle to Hitch: 6.25 ft
Wheelbase: 12.50 ft
Overall Length (without bucket): 26.17 ft
Hinge-Pin Height at Maximum Lift: 14.83 ft
Hinge-Pin Height at Carry: 2.08 ft
Lift Arm Clearance at Maximum Lift: 12.42 ft
Rack Back at Maximum Lift: 61 degrees
Rack Back at Carry Height: 48 degrees
Rack Back at Ground: 40 degrees
Maximum Width over Tires: 10.83 ft
Tread Width: 8.00 ft
Note: All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Dimensions – High Lift

Height to Top of Hood: 10.25 ft
Height to Top of Exhaust Pipe: 12.33 ft
Height to Top of ROPS: 12.58 ft
Ground Clearance: 1.42 ft
Center Line of Rear Axle to Edge of Counterweight: 8.17 ft
Center Line of Rear Axle to Hitch: 6.25 ft
Wheelbase: 12.50 ft
Overall Length (without bucket): 26.83 ft
Hinge-Pin Height at Maximum Lift: 15.58 ft
Hinge-Pin Height at Carry: 2.25 ft
Lift Arm Clearance at Maximum Lift: 13.08 ft
Rack Back at Maximum Lift: 61 degrees
Rack Back at Carry Height: 48 degrees
Rack Back at Ground: 39 degrees
Maximum Width over Tires: 10.83 ft
Tread Width: 8.00 ft
Note: All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Bucket Capacities

Bucket Range: 4.2-12.2 m³ (5.25-16.0 yd³)