304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

304.5E2 XTC Mini Hydraulic Excavator with Xtra Tool Carrier

Download the Product Brochure
Continue Browsing

The Cat® 304.5E2 XTC Mini Excavator is the first model in the Xtra Tool Carrier (XTC) lineup and delivers efficient performance, durability and versatility in a compact design.

Engine

Engine Model
Cat C2.4
Net Power
40.2 hp
Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269
40.2 hp
Bore
3.4 in
Stroke
4 in
Displacement
146 in3
Gross Power – ISO 14396
41.8 hp
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards.

Weights

Operating Weight
8996 lb
Weight – Canopy, Standard Stick
8655 lb
Weight – Canopy, Long Stick
8721 lb
Weight – Cab, Standard Stick
8930 lb
Weight – Cab, Long Stick
8996 lb
Note
Weight includes counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines.

Travel System

Travel Speed – High
3.2 mph
Travel Speed – Low
1.9 mph
Maximum Traction Force – High Speed
3799 lb
Maximum Traction Force – Low Speed
6969 lb
Ground Pressure – Canopy Standard Stick
4.2 psi
Ground Pressure – Canopy Long Stick
4.2 psi
Gradeability (maximum)
30°
Ground Pressure – Cab Standard Stick
4.3 psi
Ground Pressure – Cab Long Stick
4.3 psi
Gradeability (continuous operation)
20°

Hydraulic System

Pump Flow at 2,200 rpm
26.4 gal/min
Operating Pressure – Equipment
3553 psi
Operating Pressure – Travel
3553 psi
Operating Pressure – Swing
3132 psi
Auxiliary Circuit – Primary (245 bar/3,553 psi)
18.5 gal/min
Auxiliary Circuit – Secondary (174 bar/2,524 psi)
6.6 gal/min
Digging Force – Stick (standard)
4856 lb
Digging Force – Stick (long)
4384 lb
Digging Force – Bucket
8498 lb
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump

Swing System

Machine Swing Speed
10 rpm
Boom Swing – Left (without stop)*
80°
Boom Swing – Left (with stop)*
55°
Boom Swing – Right
50°
Note
*Automatic swing brake, spring applied, hydraulic release.

Blade

Width
76.8 in
Height
12.8 in
Dig Depth
18.5 in
Lift Height
15.7 in

Service Refill Capacities

Cooling System
1.5 gal
Engine Oil
2.5 gal
Hydraulic Tank
6.6 gal
Fuel Tank
15.1 gal
Hydraulic System
15.3 gal

Operating Specifications

Stick Length – Standard
52 in
Stick Length – Long
64 in
Machine Overhang
0 in

Cab

Dynamic Operator Sound Pressure Level (ISO 6396:2008)
81 dB(A)
Exterior Sound Power Level (ISO 6395:2008)*
96 dB(A)
Note
*European Union Directive “2000/14/EC”

Certification – Cab and Canopy

Roll Over Protective Structure (ROPS)
ISO 12117-2
Tip Over Protective Structure (TOPS)
ISO 12117
Top Guard
ISO 10262 (Level I)

Undercarriage

Number of Carrier Rollers
1
Number of Track Rollers
4
Track Roller Type
Center Flange

Lift Capacities at Ground Level (Long Stick)* – Lift Point Radius: 3000 mm (118 in)

Blade Down – Front
3462 lb
Blade Up – Front
1808 lb
Blade Down – Side
2007 lb
Blade Up – Side
1808 lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Lift Capacities at Ground Level (Long Stick)* – Lift Point Radius: 4500 mm (177 in)

Blade Down – Front
1896 lb
Blade Up – Front
948 lb
Blade Down – Side
1058 lb
Blade Up – Side
948 lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Dimensions – Standard Stick

Dig Depth
123 in
Vertical Wall
95 in
Maximum Reach at Ground Level
206 in
Maximum Reach
211 in
Maximum Dig Height
196 in
Maximum Dump Clearance
141 in
Boom In Reach
83 in
Tail Swing
38 in
Maximum Blade Height
16 in
Maximum Blade Depth
19 in
Boom Height in Shipping Position
58 in
O/A Shipping Height
98 in
Swing Bearing Height
22 in
O/A Undercarriage Length
87 in
O/A Shipping Length
190 in
Boom Swing Right
29 in
Boom Swing Left
26 in
Track Belt/Shoe Width
14 in
O/A Track Width
77 in

Dimensions – Long Stick

Dig Depth
135 in
Vertical Wall
101 in
Maximum Reach at Ground Level
215 in
Maximum Reach
220 in
Maximum Dig Height
200 in
Maximum Dump Clearance
145 in
Boom In Reach
87 in
Tail Swing
38 in
Maximum Blade Height
16 in
Maximum Blade Depth
19 in
Boom Height in Shipping Position
70 in
O/A Shipping Height
98 in
Swing Bearing Height
22 in
O/A Undercarriage Length
87 in
O/A Shipping Length
194 in
Boom Swing Right
29 in
Boom Swing Left
26 in
Track Belt/Shoe Width
14 in
O/A Track Width
77 in

Operating Specifications – Loader

Maximum Height – 1829 mm (72 in) MP Bucket with Cutting Edge
37 in
Reach at Maximum Lift and Dump – 1829 mm (72 in) MP Bucket
80 in
Rack Back Angle at Maximum Height – 1829 mm (72 in) MP Bucket
48°
Maximum Dump Angle – 1829 mm (72 in) MP Bucket
27°
Breakout Force, Lift – 1829 mm (72 in) MP Bucket
1588 lb
Breakout Force, Tilt – 1829 mm (72 in) MP Bucket
1874 lb
Lift Capacity – 1829 mm (72 in) MP Bucket
1158 lb
Lift Capacity – 1070 mm (42 in) Forks
1323 lb
Rated Operating Capacity* (maximum height) – 1829 mm (72 in) MP Bucket
1158 lb
Rated Operating Capacity* (ground) – 1829 mm (72 in) MP Bucket
1874 lb
Note
*Rated operating capacity based on hydraulic limit (ROC is the smaller of the hydraulic limit or 50% of the static tipping load).

Lift Capacities at Ground Level (Standard Stick)* – Lift Point Radius: 3000 mm (118 in)

Blade Down – Front
3550 lb
Blade Up – Front
1830 lb
Blade Down – Side
2029 lb
Blade Up – Side
1830 lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.

Lift Capacities at Ground Level (Standard Stick)* – Lift Point Radius: 4500 mm (177 in)

Blade Down – Front
2293 lb
Blade Up – Front
1169 lb
Blade Down – Side
1301 lb
Blade Up – Side
1169 lb
Note
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart.
  • ENGINE
    • Cat C2.4 diesel engine (meets U.S. EPA Tier 4 Final/EU Stage IIIA emission standards)
    • Automatic engine idle
    • Automatic engine shut-off
    • Automatic two speed travel
    • Diesel Particulate Filter (North America only)
    • Diesel Oxidation Catalyst (North America only)
    • Fuel and water separator
    • Power on demand
  • HYDRAULIC SYSTEM
    • 1-way and 2-way (combined function)
    • Accumulator
    • Automatic swing parking brake
    • Auxiliary hydraulic lines
    • Auxiliary line quick disconnects
    • Cat interlock system: hydraulic lockout
    • Continuous auxiliary flow
    • Ecology drain
    • Hydraulic oil cooler
    • Load sensing/flow sharing hydraulics
  • OPERATOR ENVIRONMENT
    • 100% pilot control ergonomic joysticks
    • Adjustable armrests
    • COMPASS: complete, operation, maintenance, performance and security system
      • Multiple languages
    • Cup holder
    • Hydraulic neutral lockout bar
    • Pattern changer (optional in Europe)
    • Site reference system: leveling
    • Tool storage area
    • Travel control pedals with hand levers
  • UNDERCARRIAGE
    • Dozer blade with float function
    • Track, rubber belt, 350 mm (14 in) width
    • Tie down eyes on track frame
    • Towing eye on base frame
  • FRONT LINKAGE
    • 200 degree bucket rotation
    • Certified lifting eye on bucket linkage (optional in Europe)
    • Front shovel capable
    • Thumb ready stick
  • ELECTRICAL
    • 12 volt electrical system
    • 60 ampere alternator
    • 650 CCA maintenance free battery
    • Fuse box
    • Ignition key start/stop switch
    • Slow blow fuse
    • Warning horn
  • LIGHTS AND MIRRORS
    • Boom light with time delay capability
  • SAFETY AND SECURITY
    • Anti-theft system (COMPASS)
    • Caterpillar Corporate “One Key” System
    • Door locks
    • Lockable fuel cap
    • Retractable seat belt
    • Roll Over Protective Structure (ROPS) (ISO 12117-2)
    • Tip Over Protective Structure (TOPS) (ISO 12117)
    • Top guard – ISO 10262 (Level 1)
    • Travel alarm (optional in Europe)
  • ENGINE
    • Engine block heater
  • HYDRAULIC SYSTEM
    • Quick coupler lines
    • Boom lowering check valve
    • Stick lowering check valve
    • Secondary auxiliary hydraulic lines
  • OPERATOR ENVIRONMENT
    • Cab:
      • Air conditioning
      • Heat
      • High back suspension seat
      • Interlocking front window system
      • Radio
      • Windshield wiper
  • UNDERCARRIAGE
    • Track, double grouser (steel), 350 mm (14 in)
  • PERFORMANCE MATCHED WORK TOOLS
    • Quick coupler: manual or hydraulic
    • Thumb, manual or hydraulic
    • Buckets
    • Auger, hammer, ripper
    • Skid steer loader coupler: general purpose buckets, multi-purpose buckets, forks, dozer blades, brooms, power box rakes and trenchers
  • LIGHTS AND MIRRORS
    • Light, cab with time delay capability
    • Mirror, canopy right
    • Mirror, canopy left
    • Mirror, cab rear
  • SAFETY AND SECURITY
    • Battery disconnect
    • Beacon socket
    • Front wire mesh guard
    • Rearview camera
    • Vandal guard
  • TECHNOLOGY
    • Product Link