623K Wheel Tractor-Scraper

623K Wheel Tractor-Scraper

Download the Product Brochure
Continue Browsing

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

General Data

180° Curb-to-Curb Turning Width
38.71 ft
Elevator Flight Spacing
20.0 in
Fuel Tank Refill Capacity: Scraper
201.0 gal
Maximum Depth of Cut
10.3 in
Maximum Depth of Spread
18.3 in
Maximum Floor Opening
4.4 ft
Number of Flights
15
Operating Weight (Empty)
88061.0 lb
Overall Length
45.18 ft
Overall Shipping Height
12.37 ft
Overall Width
11.71 ft
Rated Load
25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons)
Scraper Capacity: Heaped
23.0 yd3
Scraper Capacity: Struck
18.8 yd3
Tires: Scraper
33.25R29**E3
Tires: Tractor Drive
33.25R29**E3
Top Speed (Loaded)
33.5 mph
Width of Cut
10.3 ft

Engine

Flywheel Power: Tractor/Scraper
304 kW (407 hp)
Engine Model
Cat C13 ACERTâ„¢
Flywheel Power: Tractor
407.0 hp
Note
Cat C13 ACERT engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
Rated Engine RPM
2000.0 RPM

Transmission

Top Speed (Loaded)
33.5 mph

Scraper Bowl

Scraper Capacity: Heaped
23.0 yd3

Service Refill Capacities

Fuel Tank
216.09 gal
Crankcase
8.08 gal
Cooling System
11.89 gal
Diesel Exhaust Fluid
8.0572 gal
Hydraulic System
21.926 gal
Transmission System
24.76 gal

Dimensions

Height - Overall Shipping
158.9 in
Length - Overall Machine
542.0 in
Width - Overall Machine
141.1 in
Height - Top of Cab
142.6 in
Height - Scraper Blade Maximum
20.5 in
Width - Tractor
133.1 in
Width - Inside of Bowl
120.0 in
Width - Outside Rear Tires
128.9 in
Front of Tractor to Front Axle
122.8 in
Wheelbase
329.5 in
Rear Axle to Rear of Machine
89.7 in
Ground Clearance - Tractor
21.9 in
Axle to Vertical Hitch Pin
17.0 in
Height of Top of Elevator
148.3 in
Width - Overall Machine - Ladder Down
149.2 in
Width - Rear Tire Centers
90.2 in

Cab

Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).
ROPS/FOPS
Meets SAE and ISO standards

Safety Criteria Compliance Standards

Brakes
ISO 3450:1996
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Reverse Alarm
ISO 9533:2010
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Seat Belt
SAE J386:JUN1985
Steering System
ISO 5010:2007

Travel Speeds (Runout)

Transmission Gear: Eighth
33.5 mph
Transmission Gear: Fifth
13.6 mph
Transmission Gear: First
3.1 mph
Transmission Gear: Fourth
10.1 mph
Transmission Gear: Reverse
5.7 mph
Transmission Gear: Second
5.5 mph
Transmission Gear: Seventh
24.8 mph
Transmission Gear: Sixth
18.4 mph
Transmission Gear: Third
7.5 mph

Implement Cycle Times

Bowl Lower
3.5 Seconds
Bowl Raise
3.0 Seconds
Ejector Extend
6.45 Seconds
Ejector Retract
9.7 Seconds
  • STEERING ARRANGEMENTS
    • Secondary Steering Arrangement
  • INTEGRATED TECHNOLOGIES
    • Sequence Assist Arrangement
    • Load Assist
    • Cat Grade Control with Load Assist
  • OTHER ATTACHMENTS
    • Camera arrangement - WAVS
    • Steering lock - external
    • Cab beacon
    • Air horn
    • Air horn and beacon
    • Fender, scraper
    • Wiring group
  • WORK LIGHT ATTACHMENTS
    • HID work lights
  • AMBIENT CAPABILITY ARRANGEMENTS
    • Cooling, high ambient HRC
    • Cooling, low ambient HRC
    • Cooling, high ambient LRC
    • Cooling, low ambient LRC
  • OTHER ATTACHMENTS
    • Year of manufacture plate
  • SERVICE INSTRUCTIONS
    • Film arrangement - U.S. (ANSI)
    • Film arrangement - International (ISO)